Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD for SSD after sleep

25 Dec 2011   #1
RookieBaloba

Windows 7 home premium 64bit
 
 
BSOD for SSD after sleep

I run Windows 7 Home Premium (x64) on SSD harddrive.
Recent installation to computer:
- New SSD harddrive: Kingston HyperX SSD 120GB 2.5" SATA
- Replaced PSU with: Corsair CX V2 600W
- Replaced GPU with: MSI GeForce GTX 560Ti 1GB PhysX

I have just updated BIOS which solved my problem that I could not upgrade Windows 7. After this I have received multiple BSOD after computer goes to sleep.

I have turned off hybernate and hybrid sleep which does not solve my problem. I also updated firmware for SSD (before reinstalling Windows 7).

Please see attached files. Anyone having an idea what could be wrong and how to resolve problem?


My System SpecsSystem Spec
.
25 Dec 2011   #2
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by RookieBaloba View Post
I run Windows 7 Home Premium (x64) on SSD harddrive.
Recent installation to computer:
- New SSD harddrive: Kingston HyperX SSD 120GB 2.5" SATA
- Replaced PSU with: Corsair CX V2 600W
- Replaced GPU with: MSI GeForce GTX 560Ti 1GB PhysX

I have just updated BIOS which solved my problem that I could not upgrade Windows 7. After this I have received multiple BSOD after computer goes to sleep.

I have turned off hybernate and hybrid sleep which does not solve my problem. I also updated firmware for SSD (before reinstalling Windows 7).

Please see attached files. Anyone having an idea what could be wrong and how to resolve problem?

This crash was caused by disk hardware. Run the following


A- CHKDSK /R /F:
Quote:
Run CHKDSK /R /F from an elevated (Run as administrator) Command Prompt.

Do this for each hard drive on your system.

When it tells you it can't do it right now - and asks you if you'd like to do it at the next reboot - answer Y (for Yes) and press Enter.

Then reboot and let the test run.

It may take a while for it to run, but keep an occasional eye on it to see if it generates any errors.

See "CHKDSK LogFile" below in order to check the results of the test.

B- Elevated Command Prompt:

Quote:
Go to Start and type in "cmd.exe" (without the quotes)

At the top of the Search Box, right click on Cmd.exe and select "Run as administrator"

C-CHKDSK LogFile:

Quote:
Go to Start and type in "eventvwr.msc" (without the quotes) and press Enter

Expand the Windows logs heading, then select the Application log file entry.

Double click on the Source column header.

Scroll down the list until you find the Chkdsk entry (wininit for Win7) (winlogon for XP).

Copy/paste the results into your next post.
My System SpecsSystem Spec
26 Dec 2011   #3
RookieBaloba

Windows 7 home premium 64bit
 
 

Thanks for answer, I agree that something seems wrong with SSD, since I only have problem after sleep it does not seem to be hardware problem but software. Here is log form chkdsk. I did not see any error however.

Last log in eventviewer before BSOD is Event ID 8224: The VSS service is shutting down due to idle timeout.
As said before I have updated SSD firmware before and also updated Bios after that.

Firmware version: 332A (Kingston HyperX SSD, see http://www.wyyxgl.com/hardware-drivers/3032.htm)
Bios version/date = American Megatrends Inc.5.16,2010-06-03

See known issue of firmware update "Some platforms capable of supporting 6Gb SATA Drives from the chipset, but designed for use with 3Gb SATA drivers have poor signal integrity which can lead to occasional issues such as failure to wake from sleep".

Questions:
- How do I see if my system have problem with SATA 6 Gb/s (SATA3.0)? (Can slow down SATA somewhere?)
- Could reason for problem be that I first updated firmware and than Bios? (Do I need to do this a certain order)
- How do I see that Bios is configured correctly (I have verified that SATA is AHCI)
- Any program that could be used to verify what in configuration, driver, Bios that is not working with SSD?
- Any other way to proceed?

It seems that my computer problem is quite tricky so any idea how to confirm how to resolve or confirm that SSD is wrong is apprectiated. Appreciate your time and help!
My System SpecsSystem Spec
.

31 Dec 2011   #4
RookieBaloba

Windows 7 home premium 64bit
 
 

All,

I was told to make sure I have latest version of the SATA controller drivers. Anyone knowing how to verify if there are new SATA drivers for my motherboard Pegatron M2N78-LA (Violet6). I understand it was made by Asus for HP. HP does not have any drivers on homepage and only refer to Bios update http://h10025..www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv-85561-1&cc=se&dlc=sv&lc=sv&os=4063&product=4051380&sw_lang=

Anyone knowing how to verify latest appropriate Bios version or updatering SATA drivers in other way?
My System SpecsSystem Spec
Reply

 BSOD for SSD after sleep




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Numerous BSOD's. Normally caused while in sleep / putting to sleep.
Hello Seveners! I have been having trouble with a BSOD for a while now. It is getting to that extent that I bare it any longer! I need help! Firstly, these BSOD's have been happening randomly, but normally the case is while it is in sleep, or when I put it to sleep, the screen will go black,...
BSOD Help and Support
BSOD - Won't sleep or crashes during sleep on Dell Latitude 6430u
Hi, I have a Dell Latitude 6430u running windows 7 64. When I first got it I worked through many BSOD issues and it was running fine for many many months. Now recently it started not sleeping, waking up by itself during sleep and waking up from sleep with an unexpected crash message. Any and...
BSOD Help and Support
BSOD while resuming from sleep, or not resuming from sleep at all
My system was never able to resume from sleep. Tried several things, BIOS settings, settings for power management etc. Thought it could be related to recovery software or other installed drivers etc. But now: I replaced my harddisk with a SSD, did a fresh install of W7 Ultimate 64. Removed all...
BSOD Help and Support
GA-EP35-DS3L sleep and KVM switch wakes comp from sleep
Hi All, I have two systems a N650SLI-DS4 and a GA-EP35-DS3L hooked up to a Trednet KVM switch. If I put the GA-EP35-DS3L to sleep and switch to the N650SLI-DS4, the GA-EP35-DS3L system wakes up. The only way I have been able to keep it in sleep is if I hold the switch for the N650SLI-DS4 while...
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 06:56.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App