Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Startup repair boot loop!

26 Dec 2011   #1
Maestro96

Windows 7 x86 Ultimate
 
 
Startup repair boot loop!

I get into startup repair everytime i boot my pc which is never successful. I am definitely goin to explain it in detail but dis is basic problem nd plz dont mind typing coz m typing fast on iphone which may cause errors in typing!!

Yesterday,i used my pc for 7-8 hrs continuosly which is not big deal but due to it i can't figure out my action which caused problem. I kept it on for downloading at night nd when in morning i got boot screen which comes when pc is directly turned off. I did Start Windows Normally nd i got usual windows 7 loading animation for a secong nd den it started startup repair after that everytime i boot it takes me to startup repair resulting in continuos failure. I hv googled nd found many threads but none matched my exact one. Startup infinity loop didn't work. Below r given few conclusions nd obstacles-
1.) i can't get into advanced boot options using F8. But i can get into recovery menu using install dvd nd view advanced options frm startup repair.
2.) System restore din't work. I mean its not successful in restoring.
3.) bootrec.exe didnt work
4.) imp point to be noted is my last update was on 23 dec while pc worked fine on 24 th & 25th dec means dont knw wat happened 25th night that caused this problem on 26th morning.
5.) sfc/scannow says "a startup repair is left to be completed." it says to complete that first then use sfc/scannow.
6.) chkdsk results in last line saying failed to transfer log......
7.) i also get a report like many others about that problem signature.
8.) repair install not possible coz windows can't start only.
9.)i hv made a backup using cmd but is there any way without clean install?


My System SpecsSystem Spec
.
26 Dec 2011   #2
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

are you able to enter safe mode?
My System SpecsSystem Spec
26 Dec 2011   #3
Maestro96

Windows 7 x86 Ultimate
 
 

Quote   Quote: Originally Posted by koolkat77 View Post
are you able to enter safe mode?
No. I said i am not able to get advanced boot options!
My System SpecsSystem Spec
.

26 Dec 2011   #4
theog

Microsoft Community Contributor Award Recipient

ME/XP/Vista/Win7
 
 

Quote:
5.) sfc/scannow says "a startup repair is left to be completed." it says to complete that first then use sfc/scannow.
6.) chkdsk results in last line saying failed to transfer log......
Try scanning with the hard drive with the manufacturer's diagnostic tools.
Hard Drive Diagnostics Tools and Utilities (Storage) - TACKtech Corp.
HD Diagnostic
My System SpecsSystem Spec
26 Dec 2011   #5
UD98

Windows 7 Home Premium x64
 
 

It may be a hardware issue. Check out the ultimate boot CD. Ultimate Boot CD - Overview
My System SpecsSystem Spec
Reply

 Startup repair boot loop!




Thread Tools




Similar help and support threads
Thread Forum
Windows 7 will not boot, infinite startup repair loop + "unknown disk"
First time posting here, so I apologize if I my post is too vague. I started up my laptop (Alienware M14x, Windows 7 64 bit - not sure if it's Ultimate, Home Premium, etc...) yesterday and it displayed a message saying that Windows had failed to boot. I restarted and attempted starting it in...
Installation & Setup
Corrupt partition, can't boot, Startup Repair loop, tried chkdsk
Recently, my computer had a few files that were "corrupted and unreadable" and upon restarting or powering on the PC, it would run chkdsk before booting to Windows. It failed a few times, but once I luckily managed to get it to boot after running Startup Repair for the first time. This was when I...
BSOD Help and Support
Windows 7 is in a boot loop and I can't launch startup repair
Hello, I have an Acer Aspire V3-551 and recently, it can't boot, I tried a backup & restore using Acer's eRecovery management software. It was able to backup my files but hasn't made it past restoring, now I can't even go in start up repair and it keeps rebooting on windows 7 installation no...
General Discussion
Windows 7 won't startup properly - Stuck in startup repair loop
I have a Dell Inspiron and a while ago I shut down my PC and the next morning I was faced with options to repair my computer. It hung on the screen for ages before it actually came up with startup repair and supposedly fixed the problem. A few days later, everything got very slow and started to...
BSOD Help and Support
S.M.A.R.T. status bad, startup repair loop, can't reach boot menu.
NOTE: I don't know if this is the right section to post this in, I'm new on this forum. This PC has been a pain in the ass for a few months already, and it's only getting worse. I think it finally hit the brick right now, but I feel that I should still ask for last minute help. First of all, I'd...
Performance & Maintenance
Startup repair loop - Can't repair with system restore/repair/commands
Hello, I've been unable to access my custom build computer since around 5:00 yesterday. I chose to restart my computer at around that time just because it was slowing up a little and I usually do that to help, I had not installed any updates or new programs since 2 days ago when there had been a...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 16:12.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App