Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD + Flash?


27 Dec 2011   #1

Windows 7 x64
 
 
BSOD + Flash?

I have alsmost new rig:
OS Windows 7 x64 CPU Intel(R) Core(TM) i5-2310 CPU @ 2.90GHz Motherboard Gigabyte GA-H61M-DS2 (rev. 1.0) Memory 6,00 GB Dual-Channel DDR3 @ 665MHz (9-9-9-24) Graphics Card(s) AMD Radeon HD 6700 Series (Sapphire/PCPartner) (6770) Sound Card Onboard Monitor(s) Displays Acer V193HQ Hard Drives 977GB Hitachi Hitachi HDE721010SLA330 ATA Device (SATA) - 1TBAntivirus is AVIRA 12



BSOD-s happen only while playing a flash video. Error is related to ntoskrnl.exe+7cc40
While playing games everything works fine (tried COD Modern Warfare 3, newerst Skyrim).
Drivers are updated a don`t have a clue whats wrong?
Please help


My System SpecsSystem Spec
.

27 Dec 2011   #2
JMH

Win 7 Ultimate 64-bit. SP1.
 
 

Hellojoshibeast

These crashes were caused by memory corruption (probably a driver).
Please run these two tests to verify your memory and find which driver is causing the problem.

If you are overclocking anything reset to default before running these tests.
In other words STOP!!!



1-Memtest.
Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.

RAM - Test with Memtest86+



2-Driver verifier

Quote:
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Windows 7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.
Driver Verifier - Enable and Disable


Further Reading
Using Driver Verifier to identify issues with Windows drivers for advanced users
My System SpecsSystem Spec
27 Dec 2011   #3

Windows 7 x64
 
 

Thanks JMH for a quick response,

Memtest86+ passed a 2 hours run with no errors (for now).
Booted from USB stick (new feature from memtest86+)

Started driver verifier as suggested. Windows booted just fine.
Waiting for a crash to happen again.

Just tell me one more stuff (possibly a stupid question):
How will I know wich driver caused a crash?
My System SpecsSystem Spec
.


27 Dec 2011   #4
JMH

Win 7 Ultimate 64-bit. SP1.
 
 

Quote   Quote: Originally Posted by joshibeast View Post
Thanks JMH for a quick response,

Memtest86+ passed a 2 hours run with no errors (for now).
Booted from USB stick (new feature from memtest86+)

Started driver verifier as suggested. Windows booted just fine.
Waiting for a crash to happen again.

Just tell me one more stuff (possibly a stupid question):
How will I know wich driver caused a crash?

Not a stupid question at all...
If it finds an error, you will get a BSOD, which should be uploaded for analysis.
My System SpecsSystem Spec
28 Dec 2011   #5

Windows 7 x64
 
 

Okay it crashed again afret almost two days.
Here is the new file:
My System SpecsSystem Spec
28 Dec 2011   #6

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by joshibeast View Post
Okay it crashed again afret almost two days.
Here is the new file:

These crashes were caused by memory corruption (probably a driver). Please run these two tests to verify your memory and find which driver is causing the problem.

If you are overclocking anything reset to default before running these tests.
In other words STOP!!!



1-Memtest.
Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.

RAM - Test with Memtest86+



2-Driver verifier

Quote:
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Windows 7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.
Driver Verifier - Enable and Disable


Further Reading
Using Driver Verifier to identify issues with Windows drivers for advanced users
My System SpecsSystem Spec
29 Dec 2011   #7

Windows 7 x64
 
 

@zigzag3143
Thanks, but i already did memtest + driver verifier.
This is the report after the latest crash
My System SpecsSystem Spec
29 Dec 2011   #8

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by joshibeast View Post
@zigzag3143
Thanks, but i already did memtest + driver verifier.
This is the report after the latest crash
Most recent DMP file is still related to memory corruption. Either the ram or a driver passing bad information.

This one was not driver verifier enabled.
My System SpecsSystem Spec
29 Dec 2011   #9

Windows 7 x64
 
 

Sorry,
i uploaded a wrong file.
I downloaded BSOD app on my desktop so it was unable to rewrite old report files.
Here is the new one.

Also, just minutes ago I expirienced another BSOD, that seems, unrelated to to all the others.


My System SpecsSystem Spec
29 Dec 2011   #10

Windows 7 Home Premium x64
 
 

Quote   Quote: Originally Posted by joshibeast View Post
Sorry,
i uploaded a wrong file.
I downloaded BSOD app on my desktop so it was unable to rewrite old report files.
Here is the new one.

Also, just minutes ago I expirienced another BSOD, that seems, unrelated to to all the others.

Are you running any CD virtualization programs ?

!! Also make sure you have the lasted drivers installed.
My System SpecsSystem Spec
Reply

 BSOD + Flash?




Thread Tools



Similar help and support threads for2: BSOD + Flash?
Thread Forum
flash causes BSOD BSOD Help and Support
BSOD while using flash BSOD Help and Support
Getting BSOD from flash BSOD Help and Support
Flash and BSOD? BSOD Help and Support
BSOD flash plug in BSOD Help and Support
Users Remain Vulnerable to Flash Exploits After Upgrading Flash Player System Security
Taskbar Button Flash - Change Flash Count Tutorials

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 12:14 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33