Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Frequent BSoD, random error messages.

30 Dec 2011   #11
xthequwit

Windows professional 64 bit
 
 

K followed the directions, hopefully this is solved.
Thanks for the help...now I wait for the blue screen of death...the monster in my closet.


My System SpecsSystem Spec
.
30 Dec 2011   #12
writhziden

Windows 7 Home Premium 64 Bit
 
 

Quote   Quote: Originally Posted by xthequwit View Post
K followed the directions, hopefully this is solved.
Thanks for the help...now I wait for the blue screen of death...the monster in my closet.
We'll be here waiting to push that monster back into the closet. Good luck!
My System SpecsSystem Spec
30 Dec 2011   #13
xthequwit

Windows professional 64 bit
 
 

Quote   Quote: Originally Posted by writhziden View Post
Quote   Quote: Originally Posted by xthequwit View Post
K followed the directions, hopefully this is solved.
Thanks for the help...now I wait for the blue screen of death...the monster in my closet.
We'll be here waiting to push that monster back into the closet. Good luck!
...Oh hey...nice to see the cookie monster avatar again.

;.;

I was playing League with the gamepad plugged in, the entire computer froze for 5 seconds-ish I regained control for a few seconds, then it BSoD.
My System SpecsSystem Spec
.

30 Dec 2011   #14
writhziden

Windows 7 Home Premium 64 Bit
 
 

Code:
Loading Dump File [C:\Users\Mike\Downloads\BSODDmpFiles\xthequwit\123011-21234-01\123011-21234-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\users\mike\documents\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is: 
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Machine Name:
Kernel base = 0xfffff800`02a5e000 PsLoadedModuleList = 0xfffff800`02ca3670
Debug session time: Fri Dec 30 10:58:01.131 2011 (UTC - 7:00)
System Uptime: 0 days 0:16:16.366
Loading Kernel Symbols
...............................................................
................................................................
.................
Loading User Symbols
Loading unloaded module list
.....
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 50, {fffff80057d0d000, 0, fffff88002cf59ba, 5}


Could not read faulting driver name
Probably caused by : dxgkrnl.sys ( dxgkrnl!DxgkEscape+d6 )

Followup: MachineOwner
---------

3: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced.  This cannot be protected by try-except,
it must be protected by a Probe.  Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: fffff80057d0d000, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff88002cf59ba, If non-zero, the instruction address which referenced the bad memory
	address.
Arg4: 0000000000000005, (reserved)

Debugging Details:
------------------


Could not read faulting driver name

READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80002d0d100
 fffff80057d0d000 

FAULTING_IP: 
dxgkrnl!DxgkEscape+d6
fffff880`02cf59ba 483b38          cmp     rdi,qword ptr [rax]

MM_INTERNAL_CODE:  5

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VERIFIER_ENABLED_VISTA_MINIDUMP

BUGCHECK_STR:  0x50

PROCESS_NAME:  League of Lege

CURRENT_IRQL:  0

TRAP_FRAME:  fffff8800afbf6e0 -- (.trap 0xfffff8800afbf6e0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffff80057d0d000 rbx=0000000000000000 rcx=fffffa8007b71550
rdx=000000000f2ce800 rsi=0000000000000000 rdi=0000000000000000
rip=fffff88002cf59ba rsp=fffff8800afbf870 rbp=fffff8800afbfca0
 r8=000000000000016b  r9=0000000000000006 r10=fffff9600022fbf0
r11=fffff8800afbfbe8 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei ng nz na pe nc
dxgkrnl!DxgkEscape+0xd6:
fffff880`02cf59ba 483b38          cmp     rdi,qword ptr [rax] ds:3000:fffff800`57d0d000=????????????????
Resetting default scope

LAST_CONTROL_TRANSFER:  from fffff80002a853bf to fffff80002adac40

STACK_TEXT:  
fffff880`0afbf578 fffff800`02a853bf : 00000000`00000050 fffff800`57d0d000 00000000`00000000 fffff880`0afbf6e0 : nt!KeBugCheckEx
fffff880`0afbf580 fffff800`02ad8d6e : 00000000`00000000 fffff800`57d0d000 00000000`00000000 00000000`00000000 : nt! ?? ::FNODOBFM::`string'+0x44791
fffff880`0afbf6e0 fffff880`02cf59ba : 00000000`ffffd833 00000000`00000000 00000000`00000003 00000000`00000003 : nt!KiPageFault+0x16e
fffff880`0afbf870 fffff960`0022fc02 : 00000000`00000000 fffffa80`0a227060 00000000`7efa4000 00000000`00000020 : dxgkrnl!DxgkEscape+0xd6
fffff880`0afbfbf0 fffff800`02ad9ed3 : fffffa80`0a227060 00000000`000007b0 00000000`00000000 fffffa80`095bf700 : win32k!NtGdiDdDDIEscape+0x12
fffff880`0afbfc20 00000000`73d2148a : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
00000000`0f2ce7d8 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x73d2148a


STACK_COMMAND:  kb

FOLLOWUP_IP: 
dxgkrnl!DxgkEscape+d6
fffff880`02cf59ba 483b38          cmp     rdi,qword ptr [rax]

SYMBOL_STACK_INDEX:  3

SYMBOL_NAME:  dxgkrnl!DxgkEscape+d6

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: dxgkrnl

IMAGE_NAME:  dxgkrnl.sys

DEBUG_FLR_IMAGE_TIMESTAMP:  4ce799fa

FAILURE_BUCKET_ID:  X64_0x50_VRF_dxgkrnl!DxgkEscape+d6

BUCKET_ID:  X64_0x50_VRF_dxgkrnl!DxgkEscape+d6

Followup: MachineOwner
---------
Alright, this is with verifier enabled and is due to DirectX. Go through the steps in Diagnosing basic problems with DirectX to see if it resolves the issue.


If you go through the update for your display card as specified in the steps for resolving DirectX issues, do so as follows:

1. Download and install Driver Sweeper
2. Download the latest driver for your display card from amd
3. Click Start Menu
4. Right Click My Computer
5. Click Manage
6. Click Device Manager from the list on the left
7. Click the + next to Display adapter
8. Right click your amd display/graphics card device
9. Click Uninstall
10. Check the box to Delete driver software for the device
11. Click OK
12. Restart your computer in safe mode
13. Run Driver Sweeper, select display card amd drivers, analyze, clean
14. Restart your computer
15. Install the latest drivers
My System SpecsSystem Spec
30 Dec 2011   #15
xthequwit

Windows professional 64 bit
 
 

When asked to click the "Change settings" button on the Troubleshoot tab of the advanced settings, it is grey and I am unable to click it.
D:
My System SpecsSystem Spec
30 Dec 2011   #16
writhziden

Windows 7 Home Premium 64 Bit
 
 

Quote   Quote: Originally Posted by xthequwit View Post
When asked to click the "Change settings" button on the Troubleshoot tab of the advanced settings, it is grey and I am unable to click it.
D:
That just means your driver does not allow you to change settings. Ignore that step in the guide as it does not apply to you. Your display driver optimizes those settings without manual input.
My System SpecsSystem Spec
30 Dec 2011   #17
xthequwit

Windows professional 64 bit
 
 

Quote   Quote: Originally Posted by writhziden View Post
Quote   Quote: Originally Posted by xthequwit View Post
When asked to click the "Change settings" button on the Troubleshoot tab of the advanced settings, it is grey and I am unable to click it.
D:
That just means your driver does not allow you to change settings. Ignore that step in the guide as it does not apply to you. Your display driver optimizes those settings without manual input.
I figured, ok did the rest...safe mode cleansing and such.

The drivers failed two unspecified packages again, apparently no recourse.

To note, I noticed my belkin n52te doesnt list W7 as a supported OS.
without its drivers, its a comfortable keyboard...but with vista drivers it a timebomb maybe? Many fan sites recommended installing the vista's because "7 is just a pretty vista". Seemed crude but Im not one to throw a 70 dollar hand couch in the trash.

;.;

tl;dr: I installed vista drivers on w7 for a gamepad because Im dumb, have i summoned the harbingers of the apocalypse?
My System SpecsSystem Spec
30 Dec 2011   #18
writhziden

Windows 7 Home Premium 64 Bit
 
 

Quote   Quote: Originally Posted by xthequwit View Post
Quote   Quote: Originally Posted by writhziden View Post
Quote   Quote: Originally Posted by xthequwit View Post
When asked to click the "Change settings" button on the Troubleshoot tab of the advanced settings, it is grey and I am unable to click it.
D:
That just means your driver does not allow you to change settings. Ignore that step in the guide as it does not apply to you. Your display driver optimizes those settings without manual input.
I figured, ok did the rest...safe mode cleansing and such.

The drivers failed two unspecified packages again, apparently no recourse.

To note, I noticed my belkin n52te doesnt list W7 as a supported OS.
without its drivers, its a comfortable keyboard...but with vista drivers it a timebomb maybe? Many fan sites recommended installing the vista's because "7 is just a pretty vista". Seemed crude but Im not one to throw a 70 dollar hand couch in the trash.

;.;

tl;dr: I installed vista drivers on w7 for a gamepad because Im dumb, have i summoned the harbingers of the apocalypse?
Depends on how you installed them. As long as the installation procedure matched the methods described in Drivers - Install Vista Drivers on Windows 7, they should work fine. Occasionally, that method does cause conflicts, but since your keyboard is not showing up as a source of the blue screens after doing the USB fix, you are probably safe.
My System SpecsSystem Spec
30 Dec 2011   #19
xthequwit

Windows professional 64 bit
 
 

Quote   Quote: Originally Posted by writhziden View Post
Depends on how you installed them. As long as the installation procedure matched the methods described in Drivers - Install Vista Drivers on Windows 7, they should work fine. Occasionally, that method does cause conflicts, but since your keyboard is not showing up as a source of the blue screens after doing the USB fix, you are probably safe.
EDIT:I uninstalled the old ones first, promise.
Using the above tutorial
Installed the drivers with vista comp and admin enabled.
rebooted when prompted
the gamepad wasnt detected so I unplugged/replugged, windows searched for drivers and then...
Youll never guess.

BSOD!
;.;


It wasnt detecting it on start up before, but I didnt think much of it. Error code 43 in the device manager.


My System SpecsSystem Spec
30 Dec 2011   #20
writhziden

Windows 7 Home Premium 64 Bit
 
 

Code:
Loading Dump File [C:\Users\Mike\Downloads\BSODDmpFiles\xthequwit\123011-23859-01\123011-23859-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\users\mike\documents\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is: 
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Machine Name:
Kernel base = 0xfffff800`02c1d000 PsLoadedModuleList = 0xfffff800`02e62670
Debug session time: Fri Dec 30 14:13:05.613 2011 (UTC - 7:00)
System Uptime: 0 days 0:05:31.847
Loading Kernel Symbols
...............................................................
................................................................
..................
Loading User Symbols
Loading unloaded module list
........
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {0, 2, 0, fffff80002c9dbb6}

Unable to load image \SystemRoot\system32\drivers\JmtFltr.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for JmtFltr.sys
*** ERROR: Module load completed but symbols could not be loaded for JmtFltr.sys
Probably caused by : JmtFltr.sys ( JmtFltr+a5df )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: 0000000000000000, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, bitfield :
	bit 0 : value 0 = read operation, 1 = write operation
	bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff80002c9dbb6, address which referenced memory

Debugging Details:
------------------


READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80002ecc100
 0000000000000000 

CURRENT_IRQL:  2

FAULTING_IP: 
nt!KeSetEvent+16
fffff800`02c9dbb6 f6037f          test    byte ptr [rbx],7Fh

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VERIFIER_ENABLED_VISTA_MINIDUMP

BUGCHECK_STR:  0xA

PROCESS_NAME:  System

TRAP_FRAME:  fffff880031af1f0 -- (.trap 0xfffff880031af1f0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000000 rbx=0000000000000000 rcx=0000000000000001
rdx=0000000000000000 rsi=0000000000000000 rdi=0000000000000000
rip=fffff80002c9dbb6 rsp=fffff880031af380 rbp=0000000000000002
 r8=0000000000000000  r9=0000000000000000 r10=fffff88009d7f000
r11=fffff9800aa72f20 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei ng nz na pe nc
nt!KeSetEvent+0x16:
fffff800`02c9dbb6 f6037f          test    byte ptr [rbx],7Fh ds:00000000`00000000=??
Resetting default scope

LAST_CONTROL_TRANSFER:  from fffff80002c991e9 to fffff80002c99c40

STACK_TEXT:  
fffff880`031af0a8 fffff800`02c991e9 : 00000000`0000000a 00000000`00000000 00000000`00000002 00000000`00000000 : nt!KeBugCheckEx
fffff880`031af0b0 fffff800`02c97e60 : 00000000`00000000 00000000`00040001 00000000`0000000e 00000000`00000000 : nt!KiBugCheckDispatch+0x69
fffff880`031af1f0 fffff800`02c9dbb6 : fffff800`02e4c260 00000000`00000280 fffffa80`06b2c340 fffff800`02cc3972 : nt!KiPageFault+0x260
fffff880`031af380 fffff880`09d7d5df : fffffa80`0848c340 00000000`00000000 fffffa80`07a81400 fffff980`0aa72ca0 : nt!KeSetEvent+0x16
fffff880`031af3f0 fffffa80`0848c340 : 00000000`00000000 fffffa80`07a81400 fffff980`0aa72ca0 00000000`00000000 : JmtFltr+0xa5df
fffff880`031af3f8 00000000`00000000 : fffffa80`07a81400 fffff980`0aa72ca0 00000000`00000000 fffffa80`07a81410 : 0xfffffa80`0848c340


STACK_COMMAND:  kb

FOLLOWUP_IP: 
JmtFltr+a5df
fffff880`09d7d5df ??              ???

SYMBOL_STACK_INDEX:  4

SYMBOL_NAME:  JmtFltr+a5df

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: JmtFltr

IMAGE_NAME:  JmtFltr.sys

DEBUG_FLR_IMAGE_TIMESTAMP:  46fd3439

FAILURE_BUCKET_ID:  X64_0xA_VRF_JmtFltr+a5df

BUCKET_ID:  X64_0xA_VRF_JmtFltr+a5df

Followup: MachineOwner
---------
Update the following drivers if possible:

Code:
JmtFltr	fffff880`09d73000	fffff880`09d7e580	Fri Sep 28 11:04:57 2007 (46fd3439)	0001641e	None	JmtFltr.sys
vhidmini	fffff880`07df8000	fffff880`07dfb680	Fri Sep 28 11:21:57 2007 (46fd3835)	0000ddea		vhidmini.sys
You may find them with the help of Driver Reference
My System SpecsSystem Spec
Reply

 Frequent BSoD, random error messages.




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Frequent BSOD cannt read error messages
Hi, Blue screens mainly occur while playing marvel heroes. But will also occur when streaming media over plex. I do not get any error codes or anything as the bsod is actually just the light blue screen but all of the writing is not legible. It really just looks like a blue screen with lines...
BSOD Help and Support
BSOD increasingly frequent crashes; varying error messages.
Hi. In the last months, I've been experiencing an increasing number of BSOD crashes, which now happen on a daily bases. In addition to that, my system (Windows 7 pro 64 bit) for some reason stopped saving minidump files, as of last september. I am therefore enclosing my Event Viewer...
BSOD Help and Support
BSOD after random, different error messages.
Some times I do not receive any error message. Sometimes I get "uncorrectable hardware error". This has been going on for a while but the crashes happen every two days or so. It is very annoying so I would be grateful for any help.
BSOD Help and Support
Getting a BSOD at random times, at least 6 different error messages.
Would really appreciate some help, as I have no idea what the problem is. I have ran dskchk /F...and nothing. I've also ran a scan on my disk, and nothing, so i dont think it's a virus. here is my msinfo.....
BSOD Help and Support
Random BSOD's, many different error messages.
Hello, a couple months ago i received a new computer, and ever since getting it i have been receiving constant bsod's. My most recent one was a cdd.dll inpage error
BSOD Help and Support
Random BSOD's with random error messages after a new setup
Hey! I recently upgraded my setup with an Asus M4A78LT-M mobo, Athlon II X4 640 processor and TakeMS 2x2GB 1333MHz DDR3 memory. After installing the parts I tried to boot to Windows but it always resulted in the same BSOD so I reinstalled my system. After installing Windows for the first time...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 04:35.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App