Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Memory_Management BSOD

29 Dec 2011   #11
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by kevindd992002 View Post
Surprisingly, I got errors in Memtest86+ with the two modules (2x4GB) installed in my RAM slots. Does this direct to the problem right away?
What are the errors and how many?


My System SpecsSystem Spec
.
29 Dec 2011   #12
kevindd992002

Windows 7 Ultimate x6
 
 

Quote   Quote: Originally Posted by zigzag3143 View Post
Quote   Quote: Originally Posted by kevindd992002 View Post
Surprisingly, I got errors in Memtest86+ with the two modules (2x4GB) installed in my RAM slots. Does this direct to the problem right away?
What are the errors and how many?
Oops I forgot to take a picture of them but I remembered that there were 8 lines. I think they were all "Pass 5" and were numbered 0, 1, 2, 3, 4, 5 , 6, 7, 8.
My System SpecsSystem Spec
29 Dec 2011   #13
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by kevindd992002 View Post
Quote   Quote: Originally Posted by zigzag3143 View Post
Quote   Quote: Originally Posted by kevindd992002 View Post
Surprisingly, I got errors in Memtest86+ with the two modules (2x4GB) installed in my RAM slots. Does this direct to the problem right away?
What are the errors and how many?
Oops I forgot to take a picture of them but I remembered that there were 8 lines. I think they were all "Pass 5" and were numbered 0, 1, 2, 3, 4, 5 , 6, 7, 8.
Probably is ram. Try one stick at a time.
My System SpecsSystem Spec
.

29 Dec 2011   #14
kevindd992002

Windows 7 Ultimate x6
 
 

Ok, will do. Problems with RAM slots are very rare, right?
My System SpecsSystem Spec
30 Dec 2011   #15
kevindd992002

Windows 7 Ultimate x6
 
 

I've run Memtest86+ 4.20 and found errors while testing the 2 modules simultaneously. Now I'm testing the modules individually. I'm done testing RAM1, 8 passes with no errors on slot 1 and 7 passes with no errors in slot 2. I'm currently testing RAM2 on slot 1.

I did notice some weird behavior though. When one module is installed, in slot 1, the CAS reported by Memtest86+ 4.2 is 9-9-9-27 and when one module is installed, in slot 2, it is 6-6-6-20. Why the difference?
My System SpecsSystem Spec
30 Dec 2011   #16
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by kevindd992002 View Post
I've run Memtest86+ 4.20 and found errors while testing the 2 modules simultaneously. Now I'm testing the modules individually. I'm done testing RAM1, 8 passes with no errors on slot 1 and 7 passes with no errors in slot 2. I'm currently testing RAM2 on slot 1.

I did notice some weird behavior though. When one module is installed, in slot 1, the CAS reported by Memtest86+ 4.2 is 9-9-9-27 and when one module is installed, in slot 2, it is 6-6-6-20. Why the difference?
Ram slots (mobo) is less frequently the cause but I have seen it in abt 20% of the time.

The CAS may be showing a slight difference in voltage? Unsure.
My System SpecsSystem Spec
30 Dec 2011   #17
kevindd992002

Windows 7 Ultimate x6
 
 

Quote   Quote: Originally Posted by zigzag3143 View Post
Quote   Quote: Originally Posted by kevindd992002 View Post
I've run Memtest86+ 4.20 and found errors while testing the 2 modules simultaneously. Now I'm testing the modules individually. I'm done testing RAM1, 8 passes with no errors on slot 1 and 7 passes with no errors in slot 2. I'm currently testing RAM2 on slot 1.

I did notice some weird behavior though. When one module is installed, in slot 1, the CAS reported by Memtest86+ 4.2 is 9-9-9-27 and when one module is installed, in slot 2, it is 6-6-6-20. Why the difference?
Ram slots (mobo) is less frequently the cause but I have seen it in abt 20% of the time.

The CAS may be showing a slight difference in voltage? Unsure.
Weird. I have to try the other two slots (I have four) after this Memtest86+ test.

Is it also possible that each module will pass Memtest86+ for 7 passes individually but will not pass (with errors) when working together in dual channel mode? If that's the case, what is the possible cause and solution for that?
My System SpecsSystem Spec
30 Dec 2011   #18
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by kevindd992002 View Post
Quote   Quote: Originally Posted by zigzag3143 View Post
Quote   Quote: Originally Posted by kevindd992002 View Post
I've run Memtest86+ 4.20 and found errors while testing the 2 modules simultaneously. Now I'm testing the modules individually. I'm done testing RAM1, 8 passes with no errors on slot 1 and 7 passes with no errors in slot 2. I'm currently testing RAM2 on slot 1.

I did notice some weird behavior though. When one module is installed, in slot 1, the CAS reported by Memtest86+ 4.2 is 9-9-9-27 and when one module is installed, in slot 2, it is 6-6-6-20. Why the difference?
Ram slots (mobo) is less frequently the cause but I have seen it in abt 20% of the time.

The CAS may be showing a slight difference in voltage? Unsure.
Weird. I have to try the other two slots (I have four) after this Memtest86+ test.

Is it also possible that each module will pass Memtest86+ for 7 passes individually but will not pass (with errors) when working together in dual channel mode? If that's the case, what is the possible cause and solution for that?
Definitely possible that individually they will pass, just as it is possible that they will fail when jointly they were fine.

Might mean a mobo slot, voltage, etc. Is all the ram from a single package?
My System SpecsSystem Spec
30 Dec 2011   #19
kevindd992002

Windows 7 Ultimate x6
 
 

Quote   Quote: Originally Posted by zigzag3143 View Post
Quote   Quote: Originally Posted by kevindd992002 View Post
Quote   Quote: Originally Posted by zigzag3143 View Post

Ram slots (mobo) is less frequently the cause but I have seen it in abt 20% of the time.

The CAS may be showing a slight difference in voltage? Unsure.
Weird. I have to try the other two slots (I have four) after this Memtest86+ test.

Is it also possible that each module will pass Memtest86+ for 7 passes individually but will not pass (with errors) when working together in dual channel mode? If that's the case, what is the possible cause and solution for that?
Definitely possible that individually they will pass, just as it is possible that they will fail when jointly they were fine.

Might mean a mobo slot, voltage, etc. Is all the ram from a single package?
Yes, same package, it's a 2x4GB kit.

Now I'm getting a little bit worried. I hope this current test I'm having will fail because that will indicate that one of the sticks is indeed damaged. This is a brand new laptop that I bought from the US internationally (I'm from the Philippines) for crying out loud
My System SpecsSystem Spec
30 Dec 2011   #20
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by kevindd992002 View Post
Quote   Quote: Originally Posted by zigzag3143 View Post
Quote   Quote: Originally Posted by kevindd992002 View Post

Weird. I have to try the other two slots (I have four) after this Memtest86+ test.

Is it also possible that each module will pass Memtest86+ for 7 passes individually but will not pass (with errors) when working together in dual channel mode? If that's the case, what is the possible cause and solution for that?
Definitely possible that individually they will pass, just as it is possible that they will fail when jointly they were fine.

Might mean a mobo slot, voltage, etc. Is all the ram from a single package?
Yes, same package, it's a 2x4GB kit.

Now I'm getting a little bit worried. I hope this current test I'm having will fail because that will indicate that one of the sticks is indeed damaged. This is a brand new laptop that I bought from the US internationally (I'm from the Philippines) for crying out loud
Is it still under warranty?
My System SpecsSystem Spec
Reply

 Memory_Management BSOD




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD - MEMORY_MANAGEMENT (1a)
Hello folks! I'm quite new to this forum as I just signed up today but I figured it was the best thing to do. I recently built a new computer and thought everything was running smoothly until I started encountering strange occurrences of programs stop responding or crashing. One that is most...
BSOD Help and Support
BSOD - Memory_management
Unsure of what the cause was, but I do have the log file prepared for someone who can help. Error was 0x1a
BSOD Help and Support
Bsod memory_management
Hey I have recently been getting bsod, It takes about 3 or 4 attempts to turn my computer on for it to be working. It will just randomly blue screen, sometimes before I even log on. Here's a screenshot of the blue screen: http://i55.tinypic.com/9auty8.jpg Hope you can help me :)
BSOD Help and Support
Memory_management bsod
Goodday folks :) I'm new here, just bought myself a copy of Win 7 Ultimate x64 and got some issues. I keep getting BSOD's (MEMORY_MANAGEMENT mostly) and can't seem to find the problem. They happen pretty randomly, but mostly during internet browsing/downloading. Here is what I tried: -...
BSOD Help and Support
Memory_Management BSOD
Keep on getting random Memory_Management BSOD. System spec should be on my acc info. Attached DUMP folder to this post in a winrar file, also added extra info to it. I hope you guys know what the problem could be, I am depending on you. Edit: Ps; using 64 bit. Edit2: This was a...
BSOD Help and Support
Memory_management bsod
I built a new computer about a month and a half ago, and installed the Release Candidate of Windows 7 (legitimate copy with a legitimate CD key from Microsoft). For the first month or so I had zero problems, lately I have been getting BSOD's rather often, sometimes more than once a day. I've looked...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 09:15.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App