Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BDOS - Page Fault in Non Paged Area

30 Dec 2011   #1
cliffooord

Windows Ultimate x64 OEM
 
 
BDOS - Page Fault in Non Paged Area

Hello, i just got a BSOD right after my browser crashed saying something along the lines of the flash player crashing. It happened really fast so i'm not sure exactly what it said, all i know is i was watching a stream on j.tv. On the blue screen it read Page Fault in Non Paged Area.

Here are my system specs.
-Windows 7 Ultimate x64 OEM
-New install
-Computer was recently built a month ago
-Windows was installed the same time

I've also been having random hard locks, while gaming, idle, or simply browsing a website. I've updated my motherboard BIOS as well as the sound and video drivers and so far i haven't had any hard locks, just the BSOD.

Any help would be appreciated. Thanks!


My System SpecsSystem Spec
.
30 Dec 2011   #2
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by cliffooord View Post
Hello, i just got a BSOD right after my browser crashed saying something along the lines of the flash player crashing. It happened really fast so i'm not sure exactly what it said, all i know is i was watching a stream on j.tv. On the blue screen it read Page Fault in Non Paged Area.

Here are my system specs.
-Windows 7 Ultimate x64 OEM
-New install
-Computer was recently built a month ago
-Windows was installed the same time

I've also been having random hard locks, while gaming, idle, or simply browsing a website. I've updated my motherboard BIOS as well as the sound and video drivers and so far i haven't had any hard locks, just the BSOD.

Any help would be appreciated. Thanks!


Quote:
"It's not a true crash, in the sense that the bluescreen was initiated only because the combination of video driver and video hardware was being unresponsive, and not because of any synchronous processing exception".

Since Vista, the "Timeout Detection and Recovery" (TDR) components of the OS video subsystem have been capable of doing some truly impressive things to try to recover from issues which would have caused earlier OSs like XP to crash.

As a last resort, the TDR subsystem sends the video driver a "please restart yourself now!" command and waits a few seconds.

If there's no response, the OS concludes that the video driver/hardware combo has truly collapsed in a heap, and it fires off that stop 0x116 BSOD.

If playing with video driver versions hasn't helped, make sure the box is not overheating.

Try removing a side panel and aiming a big mains fan straight at the motherboard and GPU.

Run it like that for a few hours or days - long enough to ascertain whether cooler temperatures make a difference.

If so, it might be as simple as dust buildup and subsequently inadequate cooling.

I would download cpu-z and gpu-z (both free) and keep an eye on the video temps Let us know if you need help
STOP 0x116: VIDEO_TDR_ERROR troubleshooting
My System SpecsSystem Spec
30 Dec 2011   #3
cliffooord

Windows Ultimate x64 OEM
 
 

Thanks for the quick reply. I switched the bios on the videocard back to factory as well as a clean install of drivers. So hopefully i won't run into that problem anymore. But I just experienced the same hard lock i've been having this past week. I'm not sure if this is the right forum but could the problem be diagnosed with the same type of information i provided in the zip file? Thanks.

Update, i've included new reports in the attached zip just in case.
My System SpecsSystem Spec
.

30 Dec 2011   #4
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by cliffooord View Post
Thanks for the quick reply. I switched the bios on the videocard back to factory as well as a clean install of drivers. So hopefully i won't run into that problem anymore. But I just experienced the same hard lock i've been having this past week. I'm not sure if this is the right forum but could the problem be diagnosed with the same type of information i provided in the zip file? Thanks.

Update, i've included new reports in the attached zip just in case.
The info in the zip file will help us to diagnose whatever the problem is.

Are you still having crashes after the BIOS switch?
My System SpecsSystem Spec
30 Dec 2011   #5
cliffooord

Windows Ultimate x64 OEM
 
 

I've been gone all day so i'll have to wait and see. But while i was gone i left my computer running memtest and to my surprise it found at least 5 errors. I had it run for around 9 hours i believe.

Update. I haven't experienced any BSOD's so far but i'm still getting the random hard locks. I ran prime95 only for an hour without any problems. But 30 minutes later while browsing a website my computer hard locks.
My System SpecsSystem Spec
Reply

 BDOS - Page Fault in Non Paged Area




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD - page fault in non paged area
My laptop has been crashing to a bsod with the message 'page fault in non paged area' for a while now. It seems to do it pretty much randomly. Sometimes it'll only run for a few minutes then crash, others it'll run for hours and have no problems (whether I'm playing games or not). Dell Studio...
BSOD Help and Support
Page Fault in Non Paged Area.
Hi, I got this message "Page Fault in Non Paged Area." with a BSOD. I have changed the destination of my Page File (From my OS disk to another). Because I have an SSD and it took some place, I moved it to another HDD. What caused this? Help Appreciated!
BSOD Help and Support
Page fault in Non Paged area
Hey can anybody help me with the same issue . I am also getting the exact same error BSOD "PAGE FAULT IN NON PAGED AREA and BSOD appeared with NTFS.SYS Error." But I have only single operating system "windows 7 ultimate" . I also have 2 hard drive 1)160 gb seagate(installed OS) and 2) 500 Gb...
BSOD Help and Support
BSOD - Page Fault in Non Paged Area
Experienced a BSOD for the first time on my Lenovo Thinkpad T400 laptop yesterday. The BSOD error that I got was this: Page Fault in Non Paged Area 0x50 (0x.....) I have a dual-boot Fedora 12(default) and Windows 7 Home edition 64 bit (OEM). The BSOD is happening whenever I try to boot into...
BSOD Help and Support
Page fault in non paged area
I got a BSOD with this error description. I don't know what the culprit is but it is somehow related to RAM (whether it be hardware or a software's usage of RAM). The computer booted up just fine so I think it could be software specific. I was playing Zuma's Revenge at the time - it is not resource...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 02:10.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App