Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD occuring when logging in, error 0x0000007a

06 Jan 2012   #11
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by barryc182 View Post
When logging back on from hibernation the BSOD happens again, what could be causing this?
We still need the DMPS


My System SpecsSystem Spec
.
09 Jan 2012   #12
barryc182

Windows 7 Ultimate 32bit
 
 
New dumps for same problem

these are the new dumps after everything that has been done...

thanks
My System SpecsSystem Spec
09 Jan 2012   #13
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by barryc182 View Post
these are the new dumps after everything that has been done...

thanks
Again it points to HD issues.


KERNEL_DATA_INPAGE_ERROR (7a)
The requested page of kernel data could not be read in. Typically caused by
a bad block in the paging file or disk controller error. Also see
KERNEL_STACK_INPAGE_ERROR.
If the error status is 0xC000000E, 0xC000009C, 0xC000009D or 0xC0000185,
it means the disk subsystem has experienced a failure.
If the error status is 0xC000009A, then it means the request failed because
a filesystem failed to make forward progress.
Arguments:
Arg1: c057bfb8, lock type that was held (value 1,2,3, or PTE address)
Arg2: c000000e, error status (normally i/o status code)
Arg3: 1218b8c0, current process (virtual address for lock type 3, or PTE)
Arg4: af7f74da, virtual address that could not be in-paged (or PTE contents if arg1 is a PTE address)

Debugging Details:
------------------


ERROR_CODE: (NTSTATUS) 0xc000000e - A device which does not exist was specified.

DISK_HARDWARE_ERROR: There was error with disk hardware
My System SpecsSystem Spec
.

10 Jan 2012   #14
barryc182

Windows 7 Ultimate 32bit
 
 

Quote   Quote: Originally Posted by zigzag3143 View Post
Quote   Quote: Originally Posted by barryc182 View Post
these are the new dumps after everything that has been done...

thanks
Again it points to HD issues.


KERNEL_DATA_INPAGE_ERROR (7a)
The requested page of kernel data could not be read in. Typically caused by
a bad block in the paging file or disk controller error. Also see
KERNEL_STACK_INPAGE_ERROR.
If the error status is 0xC000000E, 0xC000009C, 0xC000009D or 0xC0000185,
it means the disk subsystem has experienced a failure.
If the error status is 0xC000009A, then it means the request failed because
a filesystem failed to make forward progress.
Arguments:
Arg1: c057bfb8, lock type that was held (value 1,2,3, or PTE address)
Arg2: c000000e, error status (normally i/o status code)
Arg3: 1218b8c0, current process (virtual address for lock type 3, or PTE)
Arg4: af7f74da, virtual address that could not be in-paged (or PTE contents if arg1 is a PTE address)

Debugging Details:
------------------


ERROR_CODE: (NTSTATUS) 0xc000000e - A device which does not exist was specified.

DISK_HARDWARE_ERROR: There was error with disk hardware
The solution in other words is to replace the hard drive to fix the errors?

what usually causes these errors just so i avoid it in the future?

THANKS
My System SpecsSystem Spec
Reply

 BSOD occuring when logging in, error 0x0000007a




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD Randomly error 0x0000007A
Durning normal usage of computer it crashes from unknown reason. I can't find solution to this. Please help. Sorry for mistakes.
BSOD Help and Support
BSOD while out - Error: 0x0000007a
Hi all and welcome to my first post. Having never received a blue screen (officially known as stop errors) before on my current machine, I came back to my computer after being out and discovered an stop error had occurred. The error/bug check code is 0x0000007a (kernal data inpage error). ...
BSOD Help and Support
BSOD while doing anything, error 0x0000007a
I have been blue screening on my computer for roughly a month, not seriously messing anything up, but the first time it happened my HDD couldn't be loaded, but after that I thought the worst had passed, but it had kept coming over and over again, just annoying me now, but I don't want it to get...
BSOD Help and Support
BSOD error 0X0000007A
Hello, I just got my first BSOD today. And now it happens every hour or so. I'm not sure what to do. I have all the necessary files attached, I believe. Thank you for any help you can give.
BSOD Help and Support
KSOD error before Login Screen then BSOD, error 0x0000007A
Hi 2 days ago I turned my computer on and I was logging in as normal. It finished doing the 'starting windows sequence' and then the screen turned black, with a cursor. I waited then the BSOD came up. ALSO the KSOD comes up in the Safe Mode as well.I spam f8 and I have tried everything.The most...
BSOD Help and Support
BSOD doing nothing, error 0x0000007A
I was just dozing off since it was late and when i woke up to turn off my rig it gave me this BSOD. I googled the problem and most says its caused by bad sectors. One of my HDD monitoring software says it has 1 bad sector. I've run memtest before for 16 hours+ and it gave me no error so it's...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 01:38.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App