Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: ERROR - Event 35 - Kernel-Processor-Power - ?????

12 Aug 2009   #1
willr666

 
ERROR - Event 35 - Kernel-Processor-Power - ?????

Ok, my system is slowing down when I do large file transfers (transfer goes from 60M/s to 2M/s after zero io for about 10 min).

Anyway, I am now combing through the Event Viewer + resource monitor and I came across "event 35" with the source kernel-processor-power the text associated says "Performance power management features on process or 1 in group 0 are disabled due to a firmware problem. Check with the computer mfgr for updated firmware" - anyway I have a bunch of these errors.

Googled for 'event 35' and found nothing - anyone have more detail on this event and how to solve it?


My System SpecsSystem Spec
.

15 Aug 2009   #2
usasma
Microsoft MVP

 
 

Try:
- Action Center
- Go to Start and type in "perfmon /rel" (without the quotes) and press Enter
- Go to Start and type in "perfmon /report" (without the quotes) and press Enter
- Go to Start and type in "compmgmt.msc" (without the quotes) and press Enter
Then check the different areas there (especially the Windows Application and System log files in Event Viewer) for further information.
My System SpecsSystem Spec
10 Jan 2010   #3
curtis

Windows
 
 

has the OP had any progress to report since posting this issue?

i have a system with the same error.
My System SpecsSystem Spec
.


20 Jan 2010   #4
maalitehdas

win7 ultimate
 
 
After a short power cut i'm getting the event 35 also

What is broken in my system? Device manager doesn't show any problems in hardware or drivers. My E8400 processor (dual, 3.0GHz) runs only at 1999,7MHz (diagnostic tool Everest sees the multiplier 6x instead of 9x). My BIOS settings are at 9x and 3000MHz. Since one less than a second power cut in our house the windows event log has been sending this after about every startup:

ERROR
Source:Kernel-Processor-Power
Performance power management features on processor 1 in group 0 are disabled due to a firmware problem. Check with the computer mfgr for updated firmware
ERROR
Source:Kernel-Processor-Power
Performance power management features on processor 0 in group 0 are disabled due to a firmware problem. Check with the computer mfgr for updated firmware

Quote:
- System

- Provider


[ Name] Microsoft-Windows-Kernel-Processor-Power


[ Guid] {0F67E49F-FE51-4E9F-B490-6F2948CC6027}



EventID 35


Version 0


Level 2


Task 2


Opcode 0


Keywords 0x8000000000000000

- TimeCreated


[ SystemTime] 2009-12-29T15:46:22.937500000Z



EventRecordID 49079


Correlation

- Execution


[ ProcessID] 4


[ ThreadID] 48



Channel System


Computer xxxxxxxx

- Security


[ UserID] xxxxxxxx

- EventData

Group 0

Number 0
How should I approach this problem? How to find the problem? (software or hardware).
My System SpecsSystem Spec
21 Jan 2010   #5
willr666

 
Best Guess

I am still getting the error although my disk transfer seems to be ok. The best
thing I could find out was that the error is generated from something like "speedstep"
being set.
My System SpecsSystem Spec
14 Mar 2010   #6
sommoner

Vista ult sp2 32/64bit and Windows 7 ult 32/64bit
 
 

Speedstep isn't the problem here with my fresh bios. I'm thinking that Windows is experiencing an error filtration concern since I can't find any intel from reading comments everywhere. I have opened two SRX case numbers and so far I'm also getting the 'stone wall' out of Microsoft professionals. My computer is running fine and I probably wouldn't be seeing any errors here in the event viewer but for the event ID 35 cat 2. Everything here by the way is defaulted on os settings and bios too.
My System SpecsSystem Spec
14 Mar 2010   #7
sommoner

Vista ult sp2 32/64bit and Windows 7 ult 32/64bit
 
 
Mr. Sommoner

I'm thinking that Windows [Vista Ult sp2 and Windows 7 Ult 32/64 are experiencing error event filtration concerns since I can't see any intel everywhere. The issue is present on all four of my drives seperately booted for Vista Ult sp2 and Win 7 Ult.
My System SpecsSystem Spec
14 Mar 2010   #8
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by sommoner View Post
Speedstep isn't the problem here with my fresh bios. I'm thinking that Windows is experiencing an error filtration concern since I can't find any intel from reading comments everywhere. I have opened two SRX case numbers and so far I'm also getting the 'stone wall' out of Microsoft professionals. My computer is running fine and I probably wouldn't be seeing any errors here in the event viewer but for the event ID 35 cat 2. Everything here by the way is defaulted on os settings and bios too.

Guys You do know this thread is two months old dont you?
My System SpecsSystem Spec
15 Mar 2010   #9
willr666

 

I'm not sure what your point is.

The issue is still unresolved as far as I know. While I would like to 'wish it away' I am all out of magic fary dust so will continue check responses to this thread in hopes that someone finally addresses it.
My System SpecsSystem Spec
21 Mar 2010   #10
sommoner

Vista ult sp2 32/64bit and Windows 7 ult 32/64bit
 
 
Mr. sommoner

Upon further investigation I may have noticed that the filter for this error event ID 35 [task 2] is perhaps the result of missed identitiy of drivers ment for AMD cpu support but being seen correctly as the drivers for Intel i7 920 or higher and thus logged wrongly as an error.
Please check the following link: Processor Power Management in Windows Vista and Windows Server 2008
for the most current white paper on this subject.
My System SpecsSystem Spec
Reply

 ERROR - Event 35 - Kernel-Processor-Power - ?????




Thread Tools





Similar help and support threads
Thread Forum
BSOD on Shutdown Event Log = Kernel-Processor-Power. Event ID: 6
Hi all, I've just built an AcerPower F6 desktop to Win 7 Pro 32 every shutdown it shows BSOD and promptly restarts. Event log is showing me the following for a critical event at the same time the shutdown occurs (The date on the log is from a week ago but this happens every shutdown which...
BSOD Help and Support
Event 41 kernel Power error
Hi, a few weeks ago I begun experiencing sudden computer crashes when running select games on my Sony Vaio Win7 laptop. It all began with a BSOD(happened once in a while so I ignored it) and now it just suddenly crashes with no BSOD and no error report, other than a reported event 41 in the event...
BSOD Help and Support
help event id 41 kernel power error
My laptop just freezes. I have check event viewer and mostly found error is event id 41 source kernel-power following details The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly. Another...
BSOD Help and Support
Kernel-Processor-Power Error?
Actually, I have two things I'm wondering about. First is this, it haven't really made any problems to me(I think, unless it's the cause of some of the BSODs I get), but this happens every time I start my computer so I wonder if it's something I can fix? Log Name: System Source: ...
BSOD Help and Support
Kernel power error event id 41
hi there all i recently got a new ati sapphire hd5850 graphics card laterly and since i have had the card ive been receiveing kernel power errors and even blue screens i have a Imicro 750watt power supply and i dont know if this could be causing the problem or not ive received about 2 blue screens...
BSOD Help and Support
Event Error Kernel-Processor-Power
Good Morning. I've been getting these error messages every day on start-up only in my Event Viewer with my new PC. I've had this desktop since 1/26/10. Velocity Micro Edge Z30, Windows 7 Pro x64, 17 860 2.80Hz, 8GB of ram. Should I be concerned with these errors. I copied and pasted them below....
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 06:10.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App