Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Repeated often: The following fatal alert was received: 47.

05 Jan 2012   #1
soho1

Win 7 Pro 64-bit
 
 
Repeated often: The following fatal alert was received: 47.

My Windows 7 computer is agonizingly slow at startup generating many errors and then culminates with service startup failures because the system "did not respond... in a timely fashion".

What might be causing this?

The system is up-to-date; anti-virus software reports no issues; hardware tests OK.

Log attached.


My System SpecsSystem Spec
.
05 Jan 2012   #2
writhziden

Windows 7 Home Premium 64 Bit
 
 

Could be system corruption causing it. SFC /SCANNOW Command - System File Checker run it up to three times to fix all issues. I'll see if I can find some more info in the meantime.

http://eventid.net/display.asp?phase...27&source=Dhcp could be antivirus related... Try uninstalling and re-installing. Are you using MSE or another antivirus?

Your EVENT ID: 7000 error is related to SSDP Discovery. See http://answers.microsoft.com/en-us/w...e-d132aae03e82 See the quote below.
"do this....control panel, admin tools, services, right click "ssdp discovery" go to properties and set to auto then goto "upnp device host" and do the same"

Since SSDP Discovery is related to Universal Plug and Play devices on your home network, my guess is this is an antivirus issue or similar issue. Try going through the steps to Troubleshoot Application Conflicts by Performing a Clean Startup
My System SpecsSystem Spec
06 Jan 2012   #3
soho1

Win 7 Pro 64-bit
 
 

So, I changed the MSCONFIG to eliminate startup applications,

Changed the two services UPnP and SSDP to start automatically (they were set to manual).

I re-installed MSE.

I ran the SFC and found no errors, but I still get the messages in the event log. (see previous post)
My System SpecsSystem Spec
.

06 Jan 2012   #4
writhziden

Windows 7 Home Premium 64 Bit
 
 

Quote   Quote: Originally Posted by soho1 View Post
So, I changed the MSCONFIG to eliminate startup applications,

Changed the two services UPnP and SSDP to start automatically (they were set to manual).

I re-installed MSE.

I ran the SFC and found no errors, but I still get the messages in the event log. (see previous post)
Check the dependencies for SSDP to see if another service that depends on it is having problems. To find the dependencies:
  1. Click Start Menu
  2. Type Services into search programs and files (do not hit enter)
  3. Right click Services and click Run as administrator
  4. Right click the SSDP Discovery Service
  5. click Properties
  6. Dependencies tab

Set any and all dependencies to startup type: manual through the General tab in Properties by using the above procedure 1-5 on each dependency and see if you still get ID 7000.
My System SpecsSystem Spec
08 Jan 2012   #5
soho1

Win 7 Pro 64-bit
 
 

Quote   Quote: Originally Posted by writhziden View Post
Set any and all dependencies to startup type: manual through the General tab in Properties by using the above procedure 1-5 on each dependency and see if you still get ID 7000.


Now, MANUAL seems at odds with AUTO as noted:
Quote   Quote: Originally Posted by writhziden View Post
do this....control panel, admin tools, services, right click "ssdp discovery" go to properties and set to auto then goto "upnp device host" and do the same"


However, I have tried both, all being manual and all being automatic.
SSDP Discovery depends on:
- HTTP
UPnP depends on:
- HTTP
- SSDP Discovery (which has dependencies noted above)
Note that the actual name of the service in WinHTTP Web Proxy Auto-discovery service. I had panic’d briefly not seeing HTTP under the H’s.
Anyway, all are currently automatic, running and the problem exhibits itself both ways. With manual, they start anyway even though not automatically started on boot. Again, having tried them both ways, they are currently configured to automatic.
My System SpecsSystem Spec
08 Jan 2012   #6
writhziden

Windows 7 Home Premium 64 Bit
 
 

When you run a clean startup, do you see any performance increase in boot time?
My System SpecsSystem Spec
29 Jan 2012   #7
writhziden

Windows 7 Home Premium 64 Bit
 
 

Were you ever able to resolve the slow startup times?
My System SpecsSystem Spec
07 Mar 2012   #8
soho1

Win 7 Pro 64-bit
 
 

Sorry for the delay. I'd have to admit I'm less a multi-tasker than a many-tasker.

Dang, this problem still exists. It's just been pushed to the bottom of my to-deal-with stack.
My System SpecsSystem Spec
07 Mar 2012   #9
writhziden

Windows 7 Home Premium 64 Bit
 
 

Fair enough. Let us know when it is sifted more to the top.
My System SpecsSystem Spec
07 Mar 2012   #10
soho1

Win 7 Pro 64-bit
 
 

Sorry to announce that I just made the user happy this morning by replacing the laptop. This of course, left the root cause unknown.
My System SpecsSystem Spec
Reply

 Repeated often: The following fatal alert was received: 47.




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
How fatal is "fatal"? -- Two persistent log errors, help please
Greetings, I have been finding these two errors in my log and don't know what action -- if any -- I should be taking to fix. I don't know how serious these are. The information that I find online is not clear to me at all -- sometimes sounds dangerous, sometimes not. The following error...
General Discussion
Repeated error sound and repeated entrance of letter "Q"
HI! I've been researching this issue for a while and cant find any solution. If anyone have any ideas what could be causing please let me know. I will be very thankful for any help, and sorry if there was a similar thread, I must have missed it. From time to time (maybe every 15-20 ...
BSOD Help and Support
The following fatal error alert was generated: 10. The internal error
Hi Guys, My win7 X64 laptop keeps freezing up. In Event Viewer I got the following message. 'The following fatal error alert was generated: 10. The internal error state is 10. schannel. This error doesn't give me much to work on. Any help on this is much appreciated. Many thanks AIRobot
BSOD Help and Support
Received a BSOD! - Please help
Hello everyone and Greetings from Down Under!, Recently I've installed Windows 7 as a dual boot to Windows XP (Windows XP was first) . Windows 7 works fine while I am using it, but after leaving it for a while, ie it sits idle or I go away from the computer for a bit, I come back and I get a...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 15:33.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App