Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: System very unstable, overheating NB a possible cause?

08 Jan 2012   #11
Akira181

Windows 7 Professional x64
 
 

seem to have made things worse. Downloading something from the internet and had 3 BSOD.

All the causes seem to be due to ntoskrnl.exe or ntkrnlmp.exe. Maybe I should RMA the RAM and Mobo to be sure


My System SpecsSystem Spec
.
08 Jan 2012   #12
writhziden

Windows 7 Home Premium 64 Bit
 
 

What kind(s) of RAM do you have? Can you list each module and its manufacturer?

Nevermind, are those the ones listed in the system specs? If so, did you buy them at the same time?

See http://download.gigabyte.us/FileList...a-870a-ud3.pdf for compatible ram for your motherboard.

I also just read Post #44 of your previous thread, and I noted that you were told the RAM may not be compatible with the AMD motherboard. Do you still have the problem in Memtest86+ with slots 2 and 4?
My System SpecsSystem Spec
08 Jan 2012   #13
writhziden

Windows 7 Home Premium 64 Bit
 
 

I also note that you have a new BIOS update available that is supposed to fix RAM voltage issues. May be worth looking into with Dave76 when he responds. GIGABYTE - Motherboard - Socket AM3 - GA-870A-UD3 (rev. 2.0)
My System SpecsSystem Spec
.

08 Jan 2012   #14
Akira181

Windows 7 Professional x64
 
 

I installed the latest BIOS (F5) this morning, didn't notice any change. I'm still using the same RAM, I'm pretty sure I reran MemTest after the CPU RMA and still had errors but that was a while ago so not completely sure anymore
My System SpecsSystem Spec
08 Jan 2012   #15
writhziden

Windows 7 Home Premium 64 Bit
 
 

Quote   Quote: Originally Posted by Akira181 View Post
I installed the latest BIOS (F5) this morning, didn't notice any change. I'm still using the same RAM, I'm pretty sure I reran MemTest after the CPU RMA and still had errors but that was a while ago so not completely sure anymore
Yeah, I was wondering if it might be due to a possible incompatibility with the AMD processor. It may not be the processor but the memory that is causing the processor to fail at memory management. I'm no expert in the matter, so maybe Dave76 can confirm or shoot down my hypothesis.
My System SpecsSystem Spec
09 Jan 2012   #16
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Quote   Quote: Originally Posted by writhziden View Post
Quote   Quote: Originally Posted by Akira181 View Post
I installed the latest BIOS (F5) this morning, didn't notice any change. I'm still using the same RAM, I'm pretty sure I reran MemTest after the CPU RMA and still had errors but that was a while ago so not completely sure anymore
Yeah, I was wondering if it might be due to a possible incompatibility with the AMD processor. It may not be the processor but the memory that is causing the processor to fail at memory management. I'm no expert in the matter, so maybe Dave76 can confirm or shoot down my hypothesis.
Sorry to see you are still having the same issues.

The BIOS update is a good idea.

This comes down to RAM compatibility, it's a known issue, AMD has had so many issues with this that they are now selling their own AMD Memory.

AMD Memory for Systems

Run memtest86+ again to be sure the RAM is not faulty.
Minimum 7 full passes, best to run over night.

Down load the crash dump files and I'll take a look at them.
We can see if there might be anything else causing issues.

Blue Screen of Death (BSOD) Posting Instructions
When posting a new crash dump, include all System File Collection and health reports. They contain valuable information that we can use to find the cause of the crashes.
Be sure to add all the files requested.

To ensure minidumps are enabled:
Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.
My System SpecsSystem Spec
09 Jan 2012   #17
Akira181

Windows 7 Professional x64
 
 

attached the dump files and reports.

I'm about to go to work so I'll run memtest now and post an update later.

I've been using AMD processors and Corsair RAM for the past 8 years now and this is the first time I've ran into problems. I just don't know if it's faulty or compatibility issues
My System SpecsSystem Spec
09 Jan 2012   #18
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

The recent changes in CPU architecture has made it more difficult to get RAM to run on both AMD and Intel CPUs.
Let us know how the memtest86+ run goes.


Your last crash is STOP 0x00000024: NTFS_FILE_SYSTEM
Usual causes: Disk corruption, insufficient physical memory, Device driver, Indexing, Resident antivirus, backup, defrag programs, Disk/Drive failing/failure

Cause:
One possible cause of this bug check is disk corruption. Corruption in the NTFS file system or bad blocks (sectors) on the hard disk can induce this error. Corrupted SCSI and IDE drivers can also adversely affect the system's ability to read and write to disk, thus causing the error.

Another possible cause is depletion of nonpaged pool memory. If the nonpaged pool memory is completely depleted, this error can stop the system. However, during the indexing process, if the amount of available nonpaged pool memory is very low, another kernel-mode driver requiring nonpaged pool memory can also trigger this error.

This is due to a memory referenced error.

Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

NTFS_FILE_SYSTEM (24)
    If you see NtfsExceptionFilter on the stack then the 2nd and 3rd
    parameters are the exception record and context record. Do a .cxr
    on the 3rd parameter and then kb to obtain a more informative stack
    trace.
Arguments:
Arg1: 00000000001904fb
Arg2: fffff88005bc77d8
Arg3: fffff88005bc7040
Arg4: fffff80002ff0000

Debugging Details:
------------------


EXCEPTION_RECORD:  fffff88005bc77d8 -- (.exr 0xfffff88005bc77d8)
ExceptionAddress: fffff80002ff0000 (nt!ExDeferredFreePool+0x0000000000000174)
   ExceptionCode: c0000005 (Access violation)
  ExceptionFlags: 00000000
NumberParameters: 2
   Parameter[0]: 0000000000000000
   Parameter[1]: ffffffffffffffff
Attempt to read from address ffffffffffffffff

CONTEXT:  fffff88005bc7040 -- (.cxr 0xfffff88005bc7040)
rax=004d0053005f004c rbx=0000000000000002 rcx=fffffa800395c760
rdx=fffff8a022502bc0 rsi=0000000000000000 rdi=fffff8a0198e5010
rip=fffff80002ff0000 rsp=fffff88005bc7a10 rbp=0000000000000000
 r8=fffff8a01983a4c0  r9=fffff8a022502af0 r10=fffff8a022502b00
r11=0000000000000001 r12=fffffa800395c280 r13=0000000000000000
r14=0000000000000009 r15=0000000000000001
iopl=0         nv up ei pl nz na po nc
cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00010206
nt!ExDeferredFreePool+0x174:
fffff800`02ff0000 4c395008        cmp     qword ptr [rax+8],r10 ds:002b:004d0053`005f0054=????????????????
Resetting default scope

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

PROCESS_NAME:  TrustedInstall

CURRENT_IRQL:  0

ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

EXCEPTION_PARAMETER1:  0000000000000000

EXCEPTION_PARAMETER2:  ffffffffffffffff

READ_ADDRESS:  ffffffffffffffff 

FOLLOWUP_IP: 
nt!ExDeferredFreePool+174
fffff800`02ff0000 4c395008        cmp     qword ptr [rax+8],r10

FAULTING_IP: 
nt!ExDeferredFreePool+174
fffff800`02ff0000 4c395008        cmp     qword ptr [rax+8],r10

BUGCHECK_STR:  0x24

LAST_CONTROL_TRANSFER:  from fffff80002ff14c1 to fffff80002ff0000

STACK_TEXT:  
fffff880`05bc7a10 fffff800`02ff14c1 : fffffa80`04a2b180 fffff8a0`19604450 fffffa80`06b92310 fffff880`012b754f : nt!ExDeferredFreePool+0x174
fffff880`05bc7aa0 fffff880`012bf290 : fffff8a0`19604460 fffff880`0737f4b0 fffff880`4146744e fffffa80`0a997010 : nt!ExFreePoolWithTag+0x411
fffff880`05bc7b50 fffff880`0122998d : fffffa80`0a997010 fffffa80`06b92310 fffff880`0737f4b0 fffffa80`03b25000 : Ntfs!NtfsCommonCreate+0x22f9
fffff880`05bc7d30 fffff800`02eb4447 : fffff880`0737f420 2c36866a`4eb3b04c 0662309c`7b968e9c 37820104`01062b0a : Ntfs!NtfsCommonCreateCallout+0x1d
fffff880`05bc7d60 fffff800`02eb4401 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KySwitchKernelStackCallout+0x27
fffff880`0737f2f0 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSwitchKernelStackContinue


SYMBOL_STACK_INDEX:  0

SYMBOL_NAME:  nt!ExDeferredFreePool+174

FOLLOWUP_NAME:  Pool_corruption

IMAGE_NAME:  Pool_Corruption

DEBUG_FLR_IMAGE_TIMESTAMP:  0

MODULE_NAME: Pool_Corruption

STACK_COMMAND:  .cxr 0xfffff88005bc7040 ; kb

FAILURE_BUCKET_ID:  X64_0x24_nt!ExDeferredFreePool+174

BUCKET_ID:  X64_0x24_nt!ExDeferredFreePool+174

Followup: Pool_corruption
---------
STOP 0x0000000A: IRQL_NOT_LESS_OR_EQUAL
Usual causes: Kernel mode driver, System Service, BIOS, Windows, Virus scanner, Backup tool, compatibility
This indicates that Microsoft Windows or a kernel-mode driver accessed paged memory at DISPATCH_LEVEL or above.
This bug check is issued if paged memory (or invalid memory) is accessed when the IRQL is too high.
The MSE driver MsMpEng.exe was indicated, this is a result of the cause of the crash, the RAM.
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: 0000000000000010, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, bitfield :
	bit 0 : value 0 = read operation, 1 = write operation
	bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff80002ea8a4f, address which referenced memory
STOP 0x0000001A: MEMORY_MANAGEMENT
Usual causes: Device driver, memory, kernel
This indicates that a severe memory management error occurred.
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

MEMORY_MANAGEMENT (1a)
    # Any other values for parameter 1 must be individually examined.
Arguments:
Arg1: 0000000000008884, The subtype of the bugcheck.
Arg2: fffffa800046b9c0
Arg3: fffffa800046b7b0
Arg4: 0000000000000605
IMAGE_NAME:  memory_corruption
FAILURE_BUCKET_ID:  X64_0x1a_8884_nt!MiRelinkStandbyPage+c6
BUCKET_ID:  X64_0x1a_8884_nt!MiRelinkStandbyPage+c6
STOP 0x1000007E: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M
Usual causes: Insufficient disk space, Device driver, Video card, BIOS, Breakpoint with no debugger attached, Hardware incompatibility, Faulty system service, Memory, 3rd party remote control.
This bug check indicates that a system thread generated an exception that the error handler did not catch.
Also indicating the RAM issue.
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)
This is a very common bugcheck.  Usually the exception address pinpoints
the driver/function that caused the problem.  Always note this address
as well as the link date of the driver/image that contains this address.
Some common problems are exception code 0x80000003.  This means a hard
coded breakpoint or assertion was hit, but this system was booted
/NODEBUG.  This is not supposed to happen as developers should never have
hardcoded breakpoints in retail code, but ...
If this happens, make sure a debugger gets connected, and the
system is booted /DEBUG.  This will let us see why this breakpoint is
happening.
Arguments:
Arg1: ffffffffc0000005, The exception code that was not handled
Arg2: fffff80002df6000, The address that the exception occurred at
Arg3: fffff88002c7a4b8, Exception Record Address
Arg4: fffff88002c79d20, Context Record Address

Debugging Details:
------------------


EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

FAULTING_IP: 
nt!ExDeferredFreePool+174
fffff800`02df6000 4c395008        cmp     qword ptr [rax+8],r10

EXCEPTION_RECORD:  fffff88002c7a4b8 -- (.exr 0xfffff88002c7a4b8)
ExceptionAddress: fffff80002df6000 (nt!ExDeferredFreePool+0x0000000000000174)
   ExceptionCode: c0000005 (Access violation)
  ExceptionFlags: 00000000
NumberParameters: 2
   Parameter[0]: 0000000000000000
   Parameter[1]: ffffffffffffffff
Attempt to read from address ffffffffffffffff

CONTEXT:  fffff88002c79d20 -- (.cxr 0xfffff88002c79d20)
rax=0072006500730055 rbx=0000000000000004 rcx=fffffa800395d670
rdx=fffff8a0093eea40 rsi=0000000000000000 rdi=fffff8a007d302a0
rip=fffff80002df6000 rsp=fffff88002c7a6f0 rbp=0000000000000000
 r8=fffff8a0025c6830  r9=fffff8a0093ee950 r10=fffff8a0093ee960
r11=0000000000000001 r12=fffffa800395d500 r13=0000000000000000
r14=000000000000000d r15=0000000000000001
iopl=0         nv up ei pl nz na pe nc
cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00010202
nt!ExDeferredFreePool+0x174:
fffff800`02df6000 4c395008        cmp     qword ptr [rax+8],r10 ds:002b:00720065`0073005d=????????????????
Resetting default scope

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

PROCESS_NAME:  System

CURRENT_IRQL:  0

ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

EXCEPTION_PARAMETER1:  0000000000000000

EXCEPTION_PARAMETER2:  ffffffffffffffff

READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80002efa0e0
 ffffffffffffffff 

FOLLOWUP_IP: 
nt!ExDeferredFreePool+174
fffff800`02df6000 4c395008        cmp     qword ptr [rax+8],r10

BUGCHECK_STR:  0x7E

LAST_CONTROL_TRANSFER:  from fffff80002df74c1 to fffff80002df6000

STACK_TEXT:  
fffff880`02c7a6f0 fffff800`02df74c1 : fffffa80`05787000 fffff8a0`08ea0140 00000000`00000008 fffffa80`03e30400 : nt!ExDeferredFreePool+0x174
fffff880`02c7a780 fffff880`14b681db : fffff8a0`08bdb9a0 fffff8a0`08bdb9a0 fffffa80`6d4d6956 fffff8a0`00000174 : nt!ExFreePoolWithTag+0x411
fffff880`02c7a830 fffff880`14b67d9c : fffffa80`05790d90 fffff8a0`08bdb9a0 fffff8a0`08bdb9a0 00000000`00000000 : dxgmms1!VIDMM_APERTURE_SEGMENT::UnlockAllocationRange+0x10f
fffff880`02c7a890 fffff880`14b5b76c : fffffa80`05787000 fffffa80`05787000 fffff8a0`08ddcc78 fffffa80`05787000 : dxgmms1!VIDMM_APERTURE_SEGMENT::ReleaseTemporaryResource+0xdc
fffff880`02c7a8d0 fffff880`14b58133 : 00000000`00000000 00000000`00000000 00000000`00000044 fffffa80`05787000 : dxgmms1!VIDMM_GLOBAL::EvictTemporaryAllocations+0xbc
fffff880`02c7a910 fffff880`14b7265d : 00000000`00000000 fffff8a0`0255f2d0 fffffa80`00000000 fffffa80`04c6c400 : dxgmms1!VIDMM_GLOBAL::PrepareDmaBuffer+0x69f
fffff880`02c7aae0 fffff880`14b72398 : fffff880`02f67f00 fffff880`14b71d00 fffffa80`00000000 fffffa80`00000000 : dxgmms1!VidSchiSubmitRenderCommand+0x241
fffff880`02c7acd0 fffff880`14b71e96 : 00000000`00000000 fffffa80`046fd450 00000000`00000080 fffffa80`0575c370 : dxgmms1!VidSchiSubmitQueueCommand+0x50
fffff880`02c7ad00 fffff800`02f626fa : 00000000`033b666e fffffa80`05778060 fffffa80`039ea040 fffffa80`05778060 : dxgmms1!VidSchiWorkerThread+0xd6
fffff880`02c7ad40 fffff800`02ca0b46 : fffff880`02f63180 fffffa80`05778060 fffff880`02f6df80 fffff880`012662b4 : nt!PspSystemThreadStartup+0x5a
fffff880`02c7ad80 00000000`00000000 : fffff880`02c7b000 fffff880`02c75000 fffff880`02c79ea0 00000000`00000000 : nt!KiStartSystemThread+0x16


SYMBOL_STACK_INDEX:  0

SYMBOL_NAME:  nt!ExDeferredFreePool+174

FOLLOWUP_NAME:  Pool_corruption

IMAGE_NAME:  Pool_Corruption

DEBUG_FLR_IMAGE_TIMESTAMP:  0

MODULE_NAME: Pool_Corruption

STACK_COMMAND:  .cxr 0xfffff88002c79d20 ; kb

FAILURE_BUCKET_ID:  X64_0x7E_nt!ExDeferredFreePool+174

BUCKET_ID:  X64_0x7E_nt!ExDeferredFreePool+174

Followup: Pool_corruption
STOP 0x00000019: BAD_POOL_HEADER
Usual causes: Device driver.
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

BAD_POOL_HEADER (19)
The pool is already corrupt at the time of the current request.
This may or may not be due to the caller.
The internal pool links must be walked to figure out a possible cause of
the problem, and then special pool applied to the suspect tags or the driver
verifier to a suspect driver.
Arguments:
Arg1: 0000000000000020, a pool block header size is corrupt.
Arg2: fffff8a00ad658b0, The pool entry we were looking for within the page.
Arg3: fffff8a00ad659c0, The next pool entry.
Arg4: 000000000511040a, (reserved)
STOP 0x0000001A: MEMORY_MANAGEMENT
This indicates that a severe memory management error occurred.
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

MEMORY_MANAGEMENT (1a)
    # Any other values for parameter 1 must be individually examined.
Arguments:
Arg1: 0000000000008884, The subtype of the bugcheck.
Arg2: fffffa800357f9c0
Arg3: fffffa800357fcf0
Arg4: 0000000000000506
IMAGE_NAME:  memory_corruption
All the crashes above are consistent with a memory issue.

What anti-virus are you using?



This is a driver for a tablet, Wacom(tablet) Mouse Filter
Code:
wacommousefilter.sys Sat Feb 17 02:12:17 2007
Find this and disable or un-install.

Have you installed all of the Windows updates?

System event logs:
Code:
Event[257]:
  Log Name: System
  Source: Microsoft Antimalware
  Date: 2012-01-08T23:42:06.000
  Event ID: 3002
  Task: N/A
  Level: Error
  Opcode: Info
  Keyword: Classic
  User: N/A
  User Name: N/A
  Computer: SAMCRO
  Description: 
Microsoft Antimalware Real-Time Protection feature has encountered an error and failed.
 	Feature: Behavior Monitoring
 	Error Code: 0x80004005
 	Error description: Unspecified error 
 	Reason: The filter driver requires an up-to-date engine in order to function. You must install the latest definition updates in order to enable real-time protection.

Event[393]:
  Log Name: System
  Source: Microsoft Antimalware
  Date: 2012-01-08T23:27:18.000
  Event ID: 3002
  Task: N/A
  Level: Error
  Opcode: Info
  Keyword: Classic
  User: N/A
  User Name: N/A
  Computer: SAMCRO
  Description: 
Microsoft Antimalware Real-Time Protection feature has encountered an error and failed.
 	Feature: Behavior Monitoring
 	Error Code: 0x80004005
 	Error description: Unspecified error 
 	Reason: The filter driver requires an up-to-date engine in order to function. You must install the latest definition updates in order to enable real-time protection.
Update the MSE definitions.

Code:
Event[417]:
  Log Name: System
  Source: Application Popup
  Date: 2012-01-08T23:27:05.000
  Event ID: 26
  Task: N/A
  Level: Information
  Opcode: N/A
  Keyword: Classic
  User: N/A
  User Name: N/A
  Computer: SAMCRO
  Description: 
Application popup: msnmsgr.exe - System Error : The program can't start because wlidcli.dll is missing from your computer. Try reinstalling the program to fix this problem.

Application event logs:
Code:
Event[112]:
  Log Name: Application
  Source: Windows Error Reporting
  Date: 2012-01-08T23:48:57.000
  Event ID: 1001
  Task: N/A
  Level: Information
  Opcode: Info
  Keyword: Classic
  User: N/A
  User Name: N/A
  Computer: SAMCRO
  Description: 
Fault bucket , type 0
Event Name: APPCRASH
Response: Not available
Cab Id: 0

Problem signature:
P1: AUDIODG.EXE
P2: 6.1.7600.16385
P3: 4a5bced5
P4: MMDevAPI.DLL
P5: 6.1.7600.16385
P6: 4a5bdf68
P7: c0000005
P8: 000000000001b4ee
P9: 
P10:
Install an updated version, if you have the latest then un-install and re-install.
My System SpecsSystem Spec
09 Jan 2012   #19
Akira181

Windows 7 Professional x64
 
 

Put my comments below in red


Your last crash is STOP 0x00000024: NTFS_FILE_SYSTEM
Usual causes: Disk corruption, insufficient physical memory, Device driver, Indexing, Resident antivirus, backup, defrag programs, Disk/Drive failing/failure

I have one HDD that's not the boot drive (might be the drive used for virtual memory now that you mention it) that SpeedFan SMART reports tells me is beginning to fail.

Code:
/Snip
All the crashes above are consistent with a memory issue.

What anti-virus are you using? I'm using MSE. There is something installed from McAfee but it only tells me whether or not my computer is safe, not actually an anti-Virus software, I will uninstall that when I get home

This is a driver for a tablet, Wacom(tablet) Mouse Filter
Code:
wacommousefilter.sys Sat Feb 17 02:12:17 2007
Find this and disable or un-install. It's the driver for my graphics tablet I received at Christmas. I assume I can reinstall it once we locate this problem

Have you installed all of the Windows updates? Not all, some install then I get a bluescreen. I can keep at it until all are installed if necessary

System event logs:
Code:
/snip
Update the MSE definitions. Will do

Code:
Application popup: msnmsgr.exe - System Error : The program can't start because wlidcli.dll is missing from your computer. Try reinstalling the program to fix this problem.
Will uninstall for the time being

Application event logs:
Code:
Problem signature:
P1: AUDIODG.EXE
P2: 6.1.7600.16385
P3: 4a5bced5
P4: MMDevAPI.DLL
P5: 6.1.7600.16385
P6: 4a5bdf68
P7: c0000005
P8: 000000000001b4ee
P9: 
P10:
Install an updated version, if you have the latest then un-install and re-install Install an updated version of what exactly? Don't quite understand the logs


Also, before I left the front door this morning, I saw a red line in MemTest, which I guess is an error during the first pass. Both RAM sticks are in slots 1 & 2, and MemTest says it's clocked at 666MHz. Does this mean faulty RAM or compatibility issue?
My System SpecsSystem Spec
09 Jan 2012   #20
Akira181

Windows 7 Professional x64
 
 

just back from work. Just started pass 10 and there were 363 errors.
My System SpecsSystem Spec
Reply

 System very unstable, overheating NB a possible cause?




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
System very unstable, flashing, shaking
Since a few days my system is very unstable, the windows of various applications constantly shake and flash, jump and refresh. The title bar and taskmanager show that these apps alternate almost endlessly and very fast between 'running' and 'not responding'. So far I have the impression that...
General Discussion
Update KB3024777 makes system unstable
If I install the Windows updare KB3024777 the system becomes unstable and no program will start. I have had to disable Windows Update for that, but I will be unable to update my Windows 7. Any solution? Thanks in advance.
Windows Updates & Activation
Deleted System Partition - Stable, Unstable?
Hi, guys. This is my first post. I'm getting ready to encrypt my hard disk with DiskCryptor. Before I do, I want to make sure my system is stable. I removed the 100MB Windows 7 System Reserved Partition, following the directions in the two tutorials below ... ...
Hardware & Devices
system unstable with BSOD f4 after moving system to new HD
Hello Few days ago i had windows tell me that i had a bad HDD and that i needed to do a replacement of that HDD. Through windows i did a system copy to an external HDD - but had few errors as there where files that it could not find/copy. i inserted new HDD and restored my version windows...
BSOD Help and Support
System Running Unstable If more Than 1GB RAM present.
Hi there guys. I am new to these forums. After much researching and doing many tricks I am not able to get this PC running working properly :( All the information needed by you experts can be found in the file attacched to this post. Current Situation - The PC is running very unstable at...
General Discussion
BSODs, IRQL_NOT_LESS_OR_EQUAL, Unstable System
I bought this computer at the end of last year, and put the components together myself. I installed windows 7 64bit, and I have had troubles ever since. First was a bad set of RAM, that I had to RMA. Also, the 770-C45 Motherboard has a power saving feature that shuts down the computer whenever it...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:08.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App