Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD - Possible ActiveX Issues?

11 Jan 2012   #1
stormstorr

Windows 7 32bit
 
 
BSOD - Possible ActiveX Issues?

Been having intermittant crashes over the past month. Not been able to pin anything down in particular but suspect its something to do with graphics card. Have updated all drivers etc but still getting BSOD.

Hope somebody might be able to help

Have attached Zip file containing Dump and System file data but am unable to add a System Diagnostic Report as the report status just says collecting data for 60 seconds (after 30 minutes?)


My System SpecsSystem Spec
.
11 Jan 2012   #2
usasma
Microsoft MVP

 
 

We're looking at video issues right now.
Update your video drivers from the nVidia website ( Drivers - GeForce )

5 memory dumps
5 different BSOD error codes
at least 3 different causes blamed.

This is most likely a hardware problem, but can also be:
- compatibility issue
- low-level driver problem
- or even malware

Start by checking out your video card. Make sure that:
- the fan is running
- the power plug is firmly plugged into the video card
- there is sufficient airflow in the case to get to and around the video card
- that the video card cooler is not clogged with dust/debris.

Then, try these free diagnostics (start with the 2 video test sections): Hardware Diags

Also, you have a CD/DVD program that uses a driver that dates from 2005 (afc.sys). Please uninstall the program.
You also have (either the same or another) CD/DVD program that uses a driver that dates from 2006 (pcouffin.sys). Please uninstall this program.
Your af15dba.sys driver dates from 2007. Please uninstall the DigitalNow TinyTwin DVB-T Receiver program

BSOD BUGCHECK SUMMARY
Code:

Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\011112-26348-01.dmp]
Built by: 7601.17713.x86fre.win7sp1_gdr.111025-1505
Debug session time: Wed Jan 11 11:14:53.680 2012 (UTC - 5:00)
System Uptime: 0 days 2:02:24.303
BUGCHECK_STR:  0x19_20
DEFAULT_BUCKET_ID:  VERIFIER_ENABLED_VISTA_MINIDUMP
PROCESS_NAME:  avp.exe
FAILURE_BUCKET_ID:  0x19_20_VRF_nt!ExFreePoolWithTag+1b1
Bugcheck code 00000019
Arguments 00000020 949f29a0 949f29c8 08050002
BiosVersion = F2
BiosReleaseDate = 01/18/2008
CPUID:        "Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz"
MaxSpeed:     2400
CurrentSpeed: 2400
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\011112-26301-01.dmp]
Built by: 7601.17713.x86fre.win7sp1_gdr.111025-1505
Debug session time: Wed Jan 11 09:11:10.318 2012 (UTC - 5:00)
System Uptime: 0 days 4:01:52.942
Probably caused by : ntkrpamp.exe ( nt!ExFreePoolWithTag+b1d )
BUGCHECK_STR:  0xC5_2
DEFAULT_BUCKET_ID:  VERIFIER_ENABLED_VISTA_MINIDUMP
PROCESS_NAME:  avp.exe
FAILURE_BUCKET_ID:  0xC5_2_VRF_nt!ExFreePoolWithTag+b1d
Bugcheck code 000000C5
Arguments 00000004 00000002 00000001 833275d8
BiosVersion = F2
BiosReleaseDate = 01/18/2008
CPUID:        "Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz"
MaxSpeed:     2400
CurrentSpeed: 2400
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\011112-27487-01.dmp]
Built by: 7601.17713.x86fre.win7sp1_gdr.111025-1505
Debug session time: Wed Jan 11 05:07:51.761 2012 (UTC - 5:00)
System Uptime: 0 days 14:01:51.759
*** WARNING: Unable to verify timestamp for jraid.sys
*** ERROR: Module load completed but symbols could not be loaded for jraid.sys
*** WARNING: Unable to verify timestamp for amdxata.sys
*** ERROR: Module load completed but symbols could not be loaded for amdxata.sys
*** WARNING: Unable to verify timestamp for RapportKELL.sys
*** ERROR: Module load completed but symbols could not be loaded for RapportKELL.sys
*** WARNING: Unable to verify timestamp for spldr.sys
*** ERROR: Module load completed but symbols could not be loaded for spldr.sys
*** WARNING: Unable to verify timestamp for kl1.sys
*** ERROR: Module load completed but symbols could not be loaded for kl1.sys
*** WARNING: Unable to verify timestamp for RapportPG.sys
*** ERROR: Module load completed but symbols could not be loaded for RapportPG.sys
*** WARNING: Unable to verify timestamp for RapportEI.sys
*** ERROR: Module load completed but symbols could not be loaded for RapportEI.sys
*** WARNING: Unable to verify timestamp for 33758724.sys
*** ERROR: Module load completed but symbols could not be loaded for 33758724.sys
*** WARNING: Unable to verify timestamp for AF15BDA.sys
*** ERROR: Module load completed but symbols could not be loaded for AF15BDA.sys
*** WARNING: Unable to verify timestamp for sbapifs.sys
*** ERROR: Module load completed but symbols could not be loaded for sbapifs.sys
*** WARNING: Unable to verify timestamp for klim6.sys
*** ERROR: Module load completed but symbols could not be loaded for klim6.sys
*** WARNING: Unable to verify timestamp for ckldrv.sys
*** ERROR: Module load completed but symbols could not be loaded for ckldrv.sys
*** WARNING: Unable to verify timestamp for klif.sys
*** ERROR: Module load completed but symbols could not be loaded for klif.sys
*** WARNING: Unable to verify timestamp for RapportCerberus32_34302.sys
*** ERROR: Module load completed but symbols could not be loaded for RapportCerberus32_34302.sys
*** WARNING: Unable to verify timestamp for kl2.sys
*** ERROR: Module load completed but symbols could not be loaded for kl2.sys
*** WARNING: Unable to verify timestamp for ArcSec.sys
*** ERROR: Module load completed but symbols could not be loaded for ArcSec.sys
*** WARNING: Unable to verify timestamp for intelppm.sys
*** ERROR: Module load completed but symbols could not be loaded for intelppm.sys
*** WARNING: Unable to verify timestamp for Rt86win7.sys
*** ERROR: Module load completed but symbols could not be loaded for Rt86win7.sys
*** WARNING: Unable to verify timestamp for Afc.sys
*** ERROR: Module load completed but symbols could not be loaded for Afc.sys
*** WARNING: Unable to verify timestamp for GEARAspiWDM.sys
*** ERROR: Module load completed but symbols could not be loaded for GEARAspiWDM.sys
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
*** WARNING: Unable to verify timestamp for nvBridge.kmd
*** ERROR: Module load completed but symbols could not be loaded for nvBridge.kmd
*** WARNING: Unable to verify timestamp for pcouffin.sys
*** ERROR: Module load completed but symbols could not be loaded for pcouffin.sys
*** WARNING: Unable to verify timestamp for nvoclock.sys
*** ERROR: Module load completed but symbols could not be loaded for nvoclock.sys
*** WARNING: Unable to verify timestamp for drmk.sys
*** ERROR: Module load completed but symbols could not be loaded for drmk.sys
*** WARNING: Unable to verify timestamp for klmouflt.sys
*** ERROR: Module load completed but symbols could not be loaded for klmouflt.sys
*** WARNING: Unable to verify timestamp for RTKVHDA.sys
*** ERROR: Module load completed but symbols could not be loaded for RTKVHDA.sys
*** WARNING: Unable to verify timestamp for cdd.dll
*** ERROR: Module load completed but symbols could not be loaded for cdd.dll
*** WARNING: Unable to verify timestamp for ATMFD.DLL
*** ERROR: Module load completed but symbols could not be loaded for ATMFD.DLL
*** WARNING: Unable to verify timestamp for peauth.sys
*** ERROR: Module load completed but symbols could not be loaded for peauth.sys
*** WARNING: Unable to verify timestamp for secdrv.SYS
*** ERROR: Module load completed but symbols could not be loaded for secdrv.SYS
*** WARNING: Unable to verify timestamp for TuneUpUtilitiesDriver32.sys
*** ERROR: Module load completed but symbols could not be loaded for TuneUpUtilitiesDriver32.sys
*** WARNING: Unable to verify timestamp for rapportiaso.sys
*** ERROR: Module load completed but symbols could not be loaded for rapportiaso.sys
BUGCHECK_STR:  0xc2_7
DEFAULT_BUCKET_ID:  VERIFIER_ENABLED_VISTA_MINIDUMP
PROCESS_NAME:  avp.exe
FAILURE_BUCKET_ID:  0xc2_7_VRF_nt!ExFreePoolWithTag+1b1
Bugcheck code 000000C2
Arguments 00000007 0000109b 00000000 8ca78ef0
BiosVersion = F2
BiosReleaseDate = 01/18/2008
CPUID:        "Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz"
MaxSpeed:     2400
CurrentSpeed: 2400
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\011012-26956-01.dmp]
Built by: 7601.17713.x86fre.win7sp1_gdr.111025-1505
Debug session time: Tue Jan 10 13:45:12.521 2012 (UTC - 5:00)
System Uptime: 0 days 11:33:32.519
Probably caused by : dxgmms1.sys ( dxgmms1!VIDMM_GLOBAL::ProcessDeferredCommand+443 )
DEFAULT_BUCKET_ID:  NULL_DEREFERENCE
PROCESS_NAME:  System
BUGCHECK_STR:  0x7E
FAILURE_BUCKET_ID:  0x7E_VRF_dxgmms1!VIDMM_GLOBAL::ProcessDeferredCommand+443
Bugcheck code 1000007E
Arguments c0000005 933ab501 81e45ba0 81e45780
BiosVersion = F2
BiosReleaseDate = 01/18/2008
CPUID:        "Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz"
MaxSpeed:     2400
CurrentSpeed: 2400
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\010912-26223-01.dmp]
Built by: 7601.17713.x86fre.win7sp1_gdr.111025-1505
Debug session time: Mon Jan  9 14:52:39.898 2012 (UTC - 5:00)
System Uptime: 0 days 12:34:56.521
Probably caused by : dxgmms1.sys ( dxgmms1!VIDMM_GLOBAL::CloseOneAllocation+116 )
DEFAULT_BUCKET_ID:  VERIFIER_ENABLED_VISTA_MINIDUMP
BUGCHECK_STR:  0x8E
PROCESS_NAME:  iexplore.exe
FAILURE_BUCKET_ID:  0x8E_VRF_dxgmms1!VIDMM_GLOBAL::CloseOneAllocation+116
Bugcheck code 1000008E
Arguments c0000005 931d26bc a99b6b00 00000000
BiosVersion = F2
BiosReleaseDate = 01/18/2008
CPUID:        "Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz"
MaxSpeed:     2400
CurrentSpeed: 2400
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
  
  
My System SpecsSystem Spec
11 Jan 2012   #3
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by stormstorr View Post
Been having intermittant crashes over the past month. Not been able to pin anything down in particular but suspect its something to do with graphics card. Have updated all drivers etc but still getting BSOD.

Hope somebody might be able to help

Have attached Zip file containing Dump and System file data but am unable to add a System Diagnostic Report as the report status just says collecting data for 60 seconds (after 30 minutes?)

These crashes were caused by memory corruption (probably your video driver). Please run these two tests to verify your memory and find which driver is causing the problem.

If you are overclocking anything reset to default before running these tests.
In other words STOP!!!



1-Memtest.
Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.

RAM - Test with Memtest86+



2-Driver verifier

Quote:
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.
Driver Verifier - Enable and Disable


Further Reading
Using Driver Verifier to identify issues with Windows drivers for advanced users
My System SpecsSystem Spec
.

12 Jan 2012   #4
stormstorr

Windows 7 32bit
 
 

Hi,
thank you very much for your replies.

Checked graphics card - working and cleaned of a little dust.
Updated driver to Nvidia 290.53 beta driver.
Deleted all 'Arcsoft' Software relating to afc.sys file
Removed everything relating to DVB Tuner.
pcouffin.sys relates to 'Convert X to DVD' which I know about.

Ran the graphics load test - ran for 30 minutes but I noticed temperature was 102 degrees so I stopped that.

Latest crash this evening had a 'rapport' programme being the problem. Disabled that.

Memory is all new - replaced at Christmas in light of crashes

Attached the latest report;
My System SpecsSystem Spec
12 Jan 2012   #5
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by stormstorr View Post
Hi,
thank you very much for your replies.

Checked graphics card - working and cleaned of a little dust.
Updated driver to Nvidia 290.53 beta driver.
Deleted all 'Arcsoft' Software relating to afc.sys file
Removed everything relating to DVB Tuner.
pcouffin.sys relates to 'Convert X to DVD' which I know about.

Ran the graphics load test - ran for 30 minutes but I noticed temperature was 102 degrees so I stopped that.

Latest crash this evening had a 'rapport' programme being the problem. Disabled that.

Memory is all new - replaced at Christmas in light of crashes

Attached the latest report;

I am afraid you did not remove afc. See snip

These were Related to
RapportIaso.sys RapportIaso from Trusteer Ltd. I would remove it.

Old drivers needing updating

Code:
Afc.sys    2/23/2005 1:58:55 AM    0x95df8000    0x95e00000        0x00008000    0x421c29af                        
ckldrv.sys    1/9/2006 9:47:26 PM    0x90e00000    0x90e04580        0x00004580    0x43c3203e                        
pcouffin.sys    12/5/2006 9:39:53 AM    0x94e97000    0x94ea2900        0x0000b900    0x457584b9                        
AF15BDA.sys    12/5/2007 10:41:36 PM    0x9181f000    0x9186ee80        0x0004fe80    0x47576f70                        
GEARAspiWDM.sys    5/18/2009 7:16:53 AM    0x921dc000    0x921e1280        0x00005280    0x4a1151b5
How To Find Drivers:
Quote:
- search Google for the name of the driver
- compare the Google results with what's installed on your system to figure out which device/program it belongs to
- visit the web site of the manufacturer of the hardware/program to get the latest drivers (DON'T use Windows Update or the Update driver function of Device Manager).
- if there are difficulties in locating them, post back with questions and someone will try and help you locate the appropriate program.
- - The most common drivers are listed on this page: Driver Reference Driver Reference
- - Driver manufacturer links are on this page: Drivers and Downloads
My System SpecsSystem Spec
12 Jan 2012   #6
stormstorr

Windows 7 32bit
 
 

Thank you,
Right I've identified the drivers you mentioned and removed the relevent software/ programmes.

I'll let you know how I get on - and thank you once again.
My System SpecsSystem Spec
12 Jan 2012   #7
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by stormstorr View Post
Thank you,
Right I've identified the drivers you mentioned and removed the relevent software/ programmes.

I'll let you know how I get on - and thank you once again.

My pleasure and good luck
My System SpecsSystem Spec
Reply

 BSOD - Possible ActiveX Issues?




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
IE9 cannot Run activex control .cab
good morning, afternoon and evening everybody. i'm new here. nice to meet you all. so, yesterday i suppose to use my laptop for e-seminar from website that require me to install activex control addons. (SHWebManager from SAE) it's looks like working in IE10...BUT...some feature was missing. i...
Browsers & Mail
ActiveX Controls
What should should my settings in Tools-Internet Options be for the following please: - (1) Allow previous unsused ActiveX controls to run without prompt - Enable or Disable; (2) Allow Scriptlets - Enable or Disable:sarc: Regards,
Browsers & Mail
ActiveX
A friend has asked me to look at a problem on his computer. Something is wrong with ActiveX. It is a Toshiba laptop running Windows 7 64-bit. I am using the 32-bit version of IE8. I have tried installing IE9 Beta. I have followed the advice here:...
Browsers & Mail
ActiveX
This issue has almost certainly been discussed before but I'd like to know why ActiveX scripts are challenged by Internet Explorer 9, (and all previous incarnations), and not by other browsers. Wasn't ActiveX a Microsoft alternative to JavaScript?
General Discussion
Is that me or the ActiveX wrong?
I was using FF, as usual, and I used the Coral IE tab, and used an activeX-login. then, the computer started to load something, then suddenly the BSOD came out. I did install it correctly, (both ActiveX and coral IE tab), so I tried IE. Guess what? Same thing happened. HELP!
BSOD Help and Support
Lack of Activex
just got myself a new HDD and so thought id do myself a nice shiny new install of Win7 as everything is backed up onto the old drive, install seemed to go fine, but when i went to use IE the ActiveX controls arent working! doesnt matter what site, Nvidia, MSN games, the ActiveX test here: ActiveX...
Browsers & Mail


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

й Designer Media Ltd

All times are GMT -5. The time now is 03:10.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App