Quote: Originally Posted by alexjames2320
Sorry for not giving exact details well i cant get into safe mode...i tried almost everything but didnt work this is the error i get 0x0000006B - PROCESS1_INITIALIZATION_FAILED i searched all over the internet and now i know what the problem exactly is but i dont know if i can make something to ring my windows back like it was...i dont want to loose my programms or anything...i didnt tried to make a disk check through command promote i will try it but i dont know if i can fix it at all
Any part of the disk subsystem can cause the PROCESS1_INITIALIZATION_FAILED bug check, including bad disks, bad or incorrect cables, mixing different ATA-type devices on the same chain, or drives that are not available because of hardware regeneration.
Run chkdsk A- CHKDSK /R /F:
Run CHKDSK /R /F from an elevated (Run as administrator) Command Prompt.
Do this for each hard drive on your system.
When it tells you it can't do it right now - and asks you if you'd like to do it at the next reboot - answer Y (for Yes) and press Enter.
Then reboot and let the test run.
It may take a while for it to run, but keep an occasional eye on it to see if it generates any errors.
See "CHKDSK LogFile" below in order to check the results of the test.
B- Elevated Command Prompt:
Go to Start and type in "cmd.exe" (without the quotes)
At the top of the Search Box, right click on Cmd.exe and select "Run as administrator"
Go to Start and type in "eventvwr.msc" (without the quotes) and press Enter
Expand the Windows logs heading, then select the Application log file entry.
Double click on the Source column header.
Scroll down the list until you find the Chkdsk entry (wininit for Windows 7) (winlogon for XP).
Copy/paste the results into your next post.