Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: PC Freezes and makes Buzzing Noise when Running Programs

22 Feb 2012   #21
sjc1138

Windows 7 Home Premium 64-bit Service Pack 1 / Ubuntu 12.10 64-bit
 
 

Quote   Quote: Originally Posted by writhziden View Post
For a third time: now would be a good time to follow the http://www.sevenforums.com/crashes-d...tructions.html to provide us with the crash reports and determine what driver is causing issues.
Here is a ZIP file containing all of the relevant info. System specs are below my profile.

Attachment 199733


My System SpecsSystem Spec
.
22 Feb 2012   #22
writhziden

Windows 7 Home Premium 64 Bit
 
 

Your intel storage drivers are up to date, and I see your hard disk file system driver and file system manager driver in the stack. Update the drivers using the Intel® Driver Update Utility to start.


Did updating the Intel drivers help?
My System SpecsSystem Spec
07 Apr 2012   #23
sjc1138

Windows 7 Home Premium 64-bit Service Pack 1 / Ubuntu 12.10 64-bit
 
 

Quote   Quote: Originally Posted by writhziden View Post
Your intel storage drivers are up to date, and I see your hard disk file system driver and file system manager driver in the stack. Update the drivers using the Intel® Driver Update Utility to start.


Did updating the Intel drivers help?
Just got round to updating them. Here's the files from the most recent bluescreen I had, which said it was a memory error. I have run Memtest about 6 times with no errors. So maybe it could be something to do with the motherboard? Planning on upgrading mine anyway to an i7 processor. By the way, my hard disk is also error-free.

Attachment 206102
My System SpecsSystem Spec
.

07 Apr 2012   #24
writhziden

Windows 7 Home Premium 64 Bit
 
 

Problem Devices:
Code:
Microsoft PS/2 Mouse	ACPI\PNP0F03\4&242CC0DB&0	This device is not present, is not working properly, or does not have all its drivers installed.

Security Software (just to check that you have it and it is working properly; nothing needs to be done with this information at this time):
Code:
avp.exe	c:\program files (x86)\kaspersky lab\kaspersky internet security 2012\avp.exe	1188	8	200	1380	07/04/2012 09:30	12.0.0.374	197.55 KB (202,296 bytes)	25/04/2011 00:15
avp.exe	c:\program files (x86)\kaspersky lab\kaspersky internet security 2012\avp.exe	2448	8	200	1380	07/04/2012 09:31	12.0.0.374	197.55 KB (202,296 bytes)	25/04/2011 00:15

Code:
Loading Dump File [D:\Kingston\BSODDmpFiles\sjc1138\Windows_NT6_BSOD_jcgriff2\040712-22261-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is: 
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.17727.amd64fre.win7sp1_gdr.111118-2330
Machine Name:
Kernel base = 0xfffff800`03e57000 PsLoadedModuleList = 0xfffff800`0409b650
Debug session time: Sat Apr  7 02:28:10.987 2012 (UTC - 6:00)
System Uptime: 0 days 0:02:52.750
Loading Kernel Symbols
...............................................................
................................................................
..................
Loading User Symbols
Loading unloaded module list
.......
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1A, {8886, fffffa8001493550, fffffa80010fd9a0, 504}

Probably caused by : memory_corruption ( nt!MiUnlinkPageFromLockedList+19c )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

MEMORY_MANAGEMENT (1a)
    # Any other values for parameter 1 must be individually examined.
Arguments:
Arg1: 0000000000008886, The subtype of the bugcheck.
Arg2: fffffa8001493550
Arg3: fffffa80010fd9a0
Arg4: 0000000000000504

Debugging Details:
------------------


BUGCHECK_STR:  0x1a_8886

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

PROCESS_NAME:  wmi64.exe

CURRENT_IRQL:  2

LAST_CONTROL_TRANSFER:  from fffff80003ee45cc to fffff80003ed3d40

STACK_TEXT:  
fffff880`072cf738 fffff800`03ee45cc : 00000000`0000001a 00000000`00008886 fffffa80`01493550 fffffa80`010fd9a0 : nt!KeBugCheckEx
fffff880`072cf740 fffff800`03eb4a74 : fffff8a0`01929488 fffffa80`01493550 00000000`00000000 fffff8a0`01929488 : nt!MiUnlinkPageFromLockedList+0x19c
fffff880`072cf7c0 fffff800`041aea21 : fffffa80`06b2e250 fffff6fc`40020bd0 fffff8a0`00000002 00000000`00000000 : nt!MiValidateImagePages+0x244
fffff880`072cf870 fffff800`041aeb60 : ffffffff`ffffffff 00000000`00000001 fffff8a0`01a03410 00000000`00000001 : nt!MiSwitchBaseAddress+0x61
fffff880`072cf8a0 fffff800`041cf73f : 00000000`00000004 00000000`00000080 00000000`01000000 00000000`01000000 : nt!MiRelocateImageAgain+0x100
fffff880`072cf8f0 fffff800`041ae2a6 : fffff880`072cfb40 fffff880`072cfc60 00000000`00000000 fffff880`072cfb38 : nt!MmCreateSection+0x2df
fffff880`072cfaf0 fffff800`03ed2fd3 : fffffa80`07f9bb60 00000000`0012de08 fffff880`072cfb88 00000000`0012dfd8 : nt!NtCreateSection+0x171
fffff880`072cfb70 00000000`77cc17ba : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
00000000`0012dde8 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x77cc17ba


STACK_COMMAND:  kb

FOLLOWUP_IP: 
nt!MiUnlinkPageFromLockedList+19c
fffff800`03ee45cc cc              int     3

SYMBOL_STACK_INDEX:  1

SYMBOL_NAME:  nt!MiUnlinkPageFromLockedList+19c

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: nt

DEBUG_FLR_IMAGE_TIMESTAMP:  4ec79dd2

IMAGE_NAME:  memory_corruption

FAILURE_BUCKET_ID:  X64_0x1a_8886_nt!MiUnlinkPageFromLockedList+19c

BUCKET_ID:  X64_0x1a_8886_nt!MiUnlinkPageFromLockedList+19c

Followup: MachineOwner
---------
Does point to memory problems.
  • Download and install CPU-Z and Upload screenshots of the CPU, Mainboard, Memory, and SPD tabs. In the SPD tab, upload an image of each slot.

  • I would also recommend downloading and installing all available Intel, Realtek, and NVIDIA drivers from Download
My System SpecsSystem Spec
07 Apr 2012   #25
sjc1138

Windows 7 Home Premium 64-bit Service Pack 1 / Ubuntu 12.10 64-bit
 
 

Quote   Quote: Originally Posted by writhziden View Post
Does point to memory problems.
  • Download and install CPU-Z and Upload screenshots of the CPU, Mainboard, Memory, and SPD tabs. In the SPD tab, upload an image of each slot.

  • I would also recommend downloading and installing all available Intel, Realtek, and NVIDIA drivers from Download
I have all latest drivers for all of those. I suppose another few runs of memtest won't hurt, but upgrading my RAM was also on my list of things (I'm going to go from 4 to 8GB I think). Again, thanks for your help, much appreciated

Here's the screenshots from CPU-Z (Sorry they're not attached individually).
Attachment 206165
My System SpecsSystem Spec
07 Apr 2012   #26
writhziden

Windows 7 Home Premium 64 Bit
 
 

So you have two modules of 2GB each? Are they both the exact same brand, timings, bought at the same time as a kit, etc.?

Have you tried removing one module and seeing if Windows runs stable on just one module at a time. The goal is to do the same thing as in Part 3 of the Memtest86+ tutorial except instead of testing each module and slot by running Memtest86+, you test by doing your normal routine in Windows and see if Windows still crashes. If it does, either the module or the slot being tested is bad. If Windows is stable, the module and slot are good.

Avoid Static Damage to Your PC when swapping memory modules.
My System SpecsSystem Spec
08 Apr 2012   #27
sjc1138

Windows 7 Home Premium 64-bit Service Pack 1 / Ubuntu 12.10 64-bit
 
 

Quote   Quote: Originally Posted by writhziden View Post
So you have two modules of 2GB each? Are they both the exact same brand, timings, bought at the same time as a kit, etc.?

Have you tried removing one module and seeing if Windows runs stable on just one module at a time. The goal is to do the same thing as in Part 3 of the Memtest86+ tutorial except instead of testing each module and slot by running Memtest86+, you test by doing your normal routine in Windows and see if Windows still crashes. If it does, either the module or the slot being tested is bad. If Windows is stable, the module and slot are good.

Avoid Static Damage to Your PC when swapping memory modules.
I have 2 2GB modules which came with my PC, which I believe are the same. I'll run Memtest again all day today, with one module at a time.
My System SpecsSystem Spec
08 Apr 2012   #28
writhziden

Windows 7 Home Premium 64 Bit
 
 

Windows may be a better method to test the RAM. While Memtest86+ has effective testing, it does not stress the RAM in the same way that Windows does, so sometimes it does not catch errors as well as just doing your normal routine in Windows might. See if one module/slot allows Windows to run without crashing.
My System SpecsSystem Spec
09 Apr 2012   #29
sjc1138

Windows 7 Home Premium 64-bit Service Pack 1 / Ubuntu 12.10 64-bit
 
 

Quote   Quote: Originally Posted by writhziden View Post
Windows may be a better method to test the RAM. While Memtest86+ has effective testing, it does not stress the RAM in the same way that Windows does, so sometimes it does not catch errors as well as just doing your normal routine in Windows might. See if one module/slot allows Windows to run without crashing.
Okay, I'll try that. I'm trying to get the info from the latest crash but it's bluescreening so much that this is the fifth time of trying. Will attach them when (or if) they're done.
My System SpecsSystem Spec
10 Apr 2012   #30
sjc1138

Windows 7 Home Premium 64-bit Service Pack 1 / Ubuntu 12.10 64-bit
 
 

I've been running it on one module for 2 days with no crashes, will try the other one soon.
My System SpecsSystem Spec
Reply

 PC Freezes and makes Buzzing Noise when Running Programs




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Laptop freezes for 1 minute & makes a loud buzzing noise in my room
I have a Toshiba Satellite laptop, about 4 years old. I've had this problem for a while now. Whenever I take my laptop inside my bedroom, unplugged or plugged in, doesn't matter, when I try to watch a YouTube video, 10-30 seconds in my laptop freezes and makes a loud buzzing noise from either...
Performance & Maintenance
PC Freezes and makes Buzzing Noise when Running Games
Hello, just recently joined the forums, yay! ;) I'll tell you about my problem, if anyone could help I would really appreciate it. My computer is from 2010 Custom made. It's been working like it should been for the last years while upgrading different parts for more demanding games....
General Discussion
Computer freezes and makes buzzing noise, no BSOD?
So a few weeks ago I was in Sony Vegas editing a video and suddenly my mouse and keyboard both became unresponsive and a loud buzzing noise started coming out of my speakers. I left it for a few minutes but nothing happened, there was no blue screen of death, no error message,nothing. so the only...
BSOD Help and Support
Complete freezes and loud buzzing noise ? no idea how to fix
Hi, I feel like a regular on here with the amount that goes wrong with my pc, but anyway. I've been getting random computer crashes where everything freezes and the audio speakers emit a very loud buzzing noise and the only way i can carry on is if i hit the restart button.. Now originally i...
BSOD Help and Support
Win7 build 7600+Left 4 Dead freezes&makes buzzing sound
About half hour/hour into my online game of L4D on VS mode my game freezes up and makes a constant buzzing sound? And I have to manually hold the power button on the comp to reboot and during boot it asks to start windows normally or last known good config. Anyone have any trouble like this?...
Gaming


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 17:28.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App