Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD at pretty much all times.

16 Jan 2012   #31
Fusion22

Windows 7 Ultimate x32
 
 

Yeah, but recently I just upgraded from a 4850 to a 5770 and I had the same problem with the 4850 thats why I upgraded, so I don't think that is the problem.


My System SpecsSystem Spec
.
16 Jan 2012   #32
writhziden

Windows 7 Home Premium 64 Bit
 
 

I do have one piece of good news. Your latest .dmp file was not corrupted, so we seem to have cleaned up the corrupted file system.

Your latest crash was a KERNEL_MODE_EXCEPTION_NOT_HANDLED_M crash. For these, possible causes are hard disk corruption (which hopefully no longer exists), hardware issues, a virus, your antivirus software, or lack of Windows updates/driver updates. We'll start with hardware. If you are overclocking anything, please stop.

Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).

Some hardware may have incompatible drivers. An underlying driver may be incompatible\conflicting with your system. Run Driver Verifier to find any issues. To run Driver Verifier, do the following:
a. Backup your system and user files
b. Create a system restore point
c. If you do not have a Windows 7 DVD, Create a system repair disc
d. Run Driver Verifier

If Windows cannot start in normal mode with driver verifier running, start in safe mode. If it cannot start in safe mode or normal mode, restore the system restore point using System Restore OPTION TWO.

Thanks to zigzag3143 for contributing to the Verifier steps.
If you are unable to start Windows with all drivers being verified or if the blue screen crashes fail to create .dmp files, run them in groups of 5 or 10 until you find a group that causes blue screen crashes and stores the blue screen .dmp files.
My System SpecsSystem Spec
16 Jan 2012   #33
Fusion22

Windows 7 Ultimate x32
 
 

I just ran the Memory Diagnostics Tool and didn't even put it on extended and it said there was hardware problems. When I look at the logs it shows this: The Windows Memory Diagnostic tested the computer's memory and detected hardware errors. To identify and repair these problems, contact the computer manufacturer. The window also just popped up saying I have a memory problem.

I will run the Memtest tonight, is there any other way to figure out what the problem is?
My System SpecsSystem Spec
.

16 Jan 2012   #34
writhziden

Windows 7 Home Premium 64 Bit
 
 

Sounds like you have bad RAM or incompatible RAM. The best way to rectify such problems is to contact companies that make RAM like Corsair or G-Skill and find out what RAM is compatible with your motherboard and CPU. You can also check your motherboard for RAM that is compatible. See http://download.gigabyte.us/FileList...-ep45-ud3p.pdf

Due to the age of your motherboard, I think you may be better off contacting memory manufacturers since many of the memory modules listed for the board may no longer be available.
My System SpecsSystem Spec
16 Jan 2012   #35
writhziden

Windows 7 Home Premium 64 Bit
 
 

Here is a reference from Corsair for RAM that should be compatible with your board. Gigabyte GA-EP45-UD3P Memory Upgrades - Guaranteed Compatible Memory for your Gigabyte GA-EP45-UD3P from Corsair
My System SpecsSystem Spec
16 Jan 2012   #36
Fusion22

Windows 7 Ultimate x32
 
 

Should I contact the company who made my RAM?, because I'm not quite sure who it is or what I have.

Disregard the first part, how do I find out the make and model?
My System SpecsSystem Spec
16 Jan 2012   #37
writhziden

Windows 7 Home Premium 64 Bit
 
 

Alright, so we can be sure of all your hardware, download and install HWiNFO64 Download, run without the box checked for sensor only, and click Save Report. Browse for where you want to save it so you will remember where it is. Save as html and then upload to this thread for us to look at.
My System SpecsSystem Spec
16 Jan 2012   #38
Fusion22

Windows 7 Ultimate x32
 
 

Alright, here it is.

I had to put it in a rar it wouldn't let me upload the html.
My System SpecsSystem Spec
16 Jan 2012   #39
writhziden

Windows 7 Home Premium 64 Bit
 
 

It appears that you have four DDR2-SDRAM OCZ OCZ2N10661G modules. They are not listed as being compatible with the motherboard, so that may be part of the problem. The RAM itself may also be faulty. You could try testing each stick individually and seeing how it does with Memtest86+ and/or the Windows Memory Diagnostic tool. Or you could test two at time if the board is designed to run two at a time.
My System SpecsSystem Spec
16 Jan 2012   #40
Fusion22

Windows 7 Ultimate x32
 
 

Ok, I'll try later tonight. Thanks a ton for all your help.
My System SpecsSystem Spec
Reply

 BSOD at pretty much all times.




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD pretty random
Figured id just attach the .zip that the program makes that gives all the information needed
BSOD Help and Support
BSOD pretty sure due to driver
I have run a driver verifier on Win 7 and the startup repair failed to repair it but has found bad driver/s. The dump file is attached. Can anyone read this for me to tell me which driver is bad? Thanks
BSOD Help and Support
0x0a BSOD doing pretty much anything.
Over there years I have been a long time reader / lurker here. Never really made an account, more just ended up on here via Google searches for solutions. That said, a big thank you to everyone here who takes time out of their busy lives to help random strangers on the interwebs. On to the...
BSOD Help and Support
Various BSOD while doing pretty much anything, mainly memory related
Hey guys so after one year of perfect running my custom build pc have started bsod on me pretty frequently. I get mainly memory_management and irql_not_less_or_equal. I have tried repairing Windows with the installation CD but I get a bsod every time. If someone could give me a hint about what...
BSOD Help and Support
BSOD'ing pretty randomly
This has been going on for a few weeks. I'm sure it's a driver issue but the problem is that I'm not really sure which driver it is. If anybody could help it'd be really appreciated. Running Windows 7 Home Premium 64bit, retail version. I've had this computer for only about two months. My...
BSOD Help and Support
pretty new machine BSOD
Hey all, First post here -- getting a BSOD on a newly imaged Win 7 64-bit box. .dmp file is HUGE (>500MB)...I tried to analyze it, but still a newbie and confused. kd log posted below: === C:\dbg>kd -y SRV*c:\symbols*http://msdl.microsoft com/downloads/symbols -z C:\windows\MEMORY.DMP
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 01:17.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App