Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Kernel Power Event 41

14 Feb 2012   #21
writhziden

Windows 7 Home Premium 64 Bit
 
 

Best of luck!


My System SpecsSystem Spec
.
17 Feb 2012   #22
mrviper100

Windows XP
 
 

I was have the "Kernel Power Event 41" (no BSOD) issue once to twice a day on a new build with an Intel G620 on ECS H61H2-M3 MB and Kingston HyperX (2x2GB) DDR3@1066. (No over-clocking, used as a Win 7 32bit HTPC)

Under the CPU settings in the bios I had set "Power Technology" to "disable" from the default "Energy Efficient" to correct this.


I'm going to replace the older 300w Allied SL-8320BTX power supply with a ATX v2.3 power supply and re-enable this setting. (Not sure this will help.)

Update: New power supply did not help. Disabling above helped (reset every few days), but also disabling intel turbo boost
I was able to go a week without a reset.
My System SpecsSystem Spec
09 Mar 2012   #23
writhziden

Windows 7 Home Premium 64 Bit
 
 

What is the current status of the system? Still running well after disabling turbo boost and resetting power technology and energy efficient settings?
My System SpecsSystem Spec
.

14 Apr 2012   #24
Kraminka

Windows 7 Home Premium 64-bit
 
 

Hi again,

It's been a while.
I haven't posted here due to having a huge amount of school work and thankfully not having a restart.

Since my last post I experienced another restart, a little fed up I replaced the CMOS battery with a new one to see if that would change anything.
I haven't had a restart since then. But I'm expecting one.

If I get another restart, I'll make sure to report it here.

Thanks for the help so far,

Nick
My System SpecsSystem Spec
14 Apr 2012   #25
writhziden

Windows 7 Home Premium 64 Bit
 
 

You're welcome for the help. Thank you for posting back and providing the troubleshooting steps you have done. Let us know if you need any further help or if the problem ends up being solved by the CMOS battery replacement.
My System SpecsSystem Spec
25 Apr 2012   #26
Kraminka

Windows 7 Home Premium 64-bit
 
 

Unfortunately another restart.
I was about to write this when it restarted again.
So I unplugged the PSU and plugged it back in so it would stop restarting.

Checking the event manager, there isn't something I can find apart from the usual Kernel-Power Event 41. Though, there was an error relating to the shutdown:

- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="EventLog" />
<EventID Qualifiers="32768">6008</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2012-04-25T05:03:22.000000000Z" />
<EventRecordID>120147</EventRecordID>
<Channel>System</Channel>
<Computer>Vengance</Computer>
<Security />
</System>
- <EventData>
<Data>3:00:09 PM</Data>
<Data>‎25/‎04/‎2012</Data>
<Data />
<Data />
<Data>624</Data>
<Data />
<Data />
<Binary>DC070400030019000F00000009007E00DC070400030019000500000009007E00600900003C000000010000006009 000000000000B00400000100000000000000</Binary>
</EventData>
</Event>

I might re-install windows sometime soon to try to fix this, I've got too much junk on this install anyway.
My System SpecsSystem Spec
25 Apr 2012   #27
writhziden

Windows 7 Home Premium 64 Bit
 
 

I did not see whether you have run the stress tests. If you continue to have problems after doing a fresh re-install, let us know. Clean Reinstall - Factory OEM Windows 7 may be helpful in that regard.


For the hardware checks...
  • If you are overclocking any hardware, please stop.

  • Monitor temperatures during the following tests.
    Use the following programs to monitor the temperatures.
  • Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).

    For Part 3: If You Have Errors: If you swap any memory components, follow these steps for ESD safety:
    1. Shut down and turn off your computer.
    2. Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
    3. Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
    4. Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working.
    Once these steps have been followed, it is safe to remove and replace components within your computer.
My System SpecsSystem Spec
Reply

 Kernel Power Event 41




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD on Shutdown Event Log = Kernel-Processor-Power. Event ID: 6
Hi all, I've just built an AcerPower F6 desktop to Win 7 Pro 32 every shutdown it shows BSOD and promptly restarts. Event log is showing me the following for a critical event at the same time the shutdown occurs (The date on the log is from a week ago but this happens every shutdown which...
BSOD Help and Support
Random Power Down Issue - 'Event 41, Kernel-Power'
Hi Guys, I'm currently suffering from a random power shutdown issue. The PC boots up correctly and is totally useable and in working order. However after different varied amounts of time. 20mins - 5 hours on occasion. The PC will just randomly power down as if the power cable has been...
General Discussion
Kernel-Power Event 41
Hello all, Been having unexpected crashes lately on my Pc. I am running windows 7 ultimate x64. And I have been getting the Kernel-power 41. The events before the crash are random. I have read a couple of posts on this forum but I cant seem to find the ones I used yesterday to link to. So I...
BSOD Help and Support
Kernel-Power Event ID 41
I built my own computer couple of weeks ago. At first, I was having BSOD which happens 1 time every 2-3 days. It was IRQL_NOT_EQUAL_OR_LESS. I did several different research and post my another thread about it. It seem to work now since I download the latest driver for video card then new problem...
General Discussion
Event 1001 BugCheck Event 41 Kernel-Power Event 4 k57nd60a
Alright, started getting the 1001 BugCheck crash with Event 41 Kernel-Power BSOD a few times not long ago, widely spaced out incidents (it will lock up, make a very weird repetitive noise through my stereo speakers and will also get black and white bars across the screen before the blue screen...
BSOD Help and Support
BSODs after possible power failure - Kernel-Power Event ID:41
Hello there. Firstly, sorry for not posting the zipped files as requested, I ran the utility but my paths are custom and it did not create the folder as expected. I include the crashdump files and diagnostic however. Some background: PC is about 4 years old. It had Vista (x64) on it for the...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 23:02.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App