Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.



Windows 7: "ntoskrnl.exe" BSOD - Random moments

01 Feb 2012   #21

Windows 7 Home Premium 64 Bit
 
 

You're welcome. I wouldn't recommend mentioning to Corsair that you didn't do ESD safety by the book. If you were careful, that is all they really expect. Post back, and let us know how things go with Corsair and the module RMA.

My System SpecsSystem Spec
.

03 Feb 2012   #22

Windows 7 Ultimate 64bit
 
 

RMA in process, sending package probl today.
My System SpecsSystem Spec
03 Feb 2012   #23

Windows 7 Home Premium 64 Bit
 
 

Great news. Best wishes the new RAM fixes it. Keep us posted.
My System SpecsSystem Spec
.


01 Mar 2012   #24

Windows 7 Ultimate 64bit
 
 

Alright, I received my ram yesterday. It seems to work fine (for now) alone but I wanted to run them with the G-Skill Ripjaws 2x4GB (F3-12800CL9D-4GBRBL), same speed same timing but crashes when with the corsair ones...

BSOD is caused by ram.
My System SpecsSystem Spec
01 Mar 2012   #25

Windows 7 Home Premium 64 Bit
 
 

Yeah, mixing and matching RAM usually does not work well. Even if you buy the same timings, same manufacturer, same part number, sometimes it will not work if they were bought at different times. Since you are trying with two different manufacturers, there is likely a conflict, or the old ones are just bad.
My System SpecsSystem Spec
01 Mar 2012   #26

Windows 7 Ultimate 64bit
 
 

Mmh, well too bad... 8gb of ram is not too bad... As if I needed 12gb of ram
Thanks for the help!
My System SpecsSystem Spec
01 Mar 2012   #27

Windows 7 Home Premium 64 Bit
 
 

Yeah, I only have 6 GB in my high end system, and I do video editing and video intensive PhD research. Never felt the need to upgrade RAM even with doing such tasks.

And you are very welcome. Enjoy the stable system.
My System SpecsSystem Spec
01 Mar 2012   #28

Windows 7 Ultimate 64bit
 
 

And Irony strikes! As I was reading your sentence with the word "stable", my computer crashed with memory management as problem. Goddammit. I switched back to the faithful G-Skill. I don't understand, they sent me the Ram in a new package, and I processed very carefully installing the ram avoiding ESD. Still, the BSOD haunts...
My System SpecsSystem Spec
02 Mar 2012   #29

Windows 7 Home Premium 64 Bit
 
 

Do each of the following in this order (with your new RAM):
  • Go into the BIOS, go to the exit section, and load setup defaults. Save, and exit.
  • Do your normal routine for a while and see if the system runs stable. If not, proceed to the next step.
  • Download and install CPU-Z and Upload screenshots of the CPU, Mainboard, Memory, and SPD tabs. In the SPD tab, upload an image of each slot.

    Also, go into your BIOS and post all Voltages (CPU, RAM, NB, IMC, etc.) and all RAM settings (timings, frequency, etc.)

    Thanks to Dave76 for help learning RAM Stability
My System SpecsSystem Spec
03 Mar 2012   #30

Windows 7 Ultimate 64bit
 
 

I shall proceed, but fyi the default settings of ram frequency does not enable XMP directly... Should I reset to default and then change to XMP? Or should I not worry?
My System SpecsSystem Spec
Reply

 "ntoskrnl.exe" BSOD - Random moments





Thread Tools




Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 10:04 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33