Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Computer startup errors

22 Jan 2012   #21
seavixen32

Windows 7 Ultimate SP1 64-Bit
 
 

If it doesn't prompt you then run with that for a while and see how it goes.

If it does prompt you then yes, run it from the disc.


My System SpecsSystem Spec
.
22 Jan 2012   #22
JGentiluomo

64 bit Windows 7
 
 

Thanks for all your time and help, I greatly appreciate it. Don't be surprised if I shoot you a message in case this doesnt work.
My System SpecsSystem Spec
22 Jan 2012   #23
seavixen32

Windows 7 Ultimate SP1 64-Bit
 
 

You're very welcome, we're here to help.

If it doesn't work, shoot away, I'm too long in the tooth to get over worried by a few words!
My System SpecsSystem Spec
.

22 Jan 2012   #24
JGentiluomo

64 bit Windows 7
 
 

After starting up I got BSOD'd. Here is a screencap of sorts (taken from my phone).

I turned my computer off and then back on and now it's running OK.
My System SpecsSystem Spec
22 Jan 2012   #25
seavixen32

Windows 7 Ultimate SP1 64-Bit
 
 

OK, if you get further blue screens you can configure Windows to create a dump file, and then upload it so that our BSOD experts (not me I hasten to add) can analyze it.

Dump Files - Configure Windows to Create on BSOD
My System SpecsSystem Spec
22 Jan 2012   #26
JGentiluomo

64 bit Windows 7
 
 

Excellent. Thanks again.
My System SpecsSystem Spec
22 Jan 2012   #27
seavixen32

Windows 7 Ultimate SP1 64-Bit
 
 

My System SpecsSystem Spec
22 Jan 2012   #28
JGentiluomo

64 bit Windows 7
 
 

It crashed again, this time when I tried to switch users. Looks like I'm running Startup Repair...
My System SpecsSystem Spec
22 Jan 2012   #29
JGentiluomo

64 bit Windows 7
 
 

Startup Repair was unsuccessful and resulted in a BSOD. Simply reads:

"STOP: c0000022 {Access Denied}
A process has requested access to an object, but has not been granted those access rights."

I don't have a dump file because I cannot access my Windows account to set it up.

Is there any hope?
My System SpecsSystem Spec
23 Jan 2012   #30
seavixen32

Windows 7 Ultimate SP1 64-Bit
 
 

There's always hope.

Go through the steps I've provided below. You may even want to go for broke and carry out a factory restore first. It's your call.

1. Start your computer in Safe Mode: Start your computer in safe mode If your computer runs in Safe Mode a bad driver is the most likely scenario.

2. Perform a Clean Boot: How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7 (On completion, you'll need to reset your computer to normal startup as per step 7 in the Clean Boot article).

3. Try Last Known Good Configuration: Using Last Known Good Configuration

4. Perform a system recovery from the Recovery Console: What are the system recovery options in Windows 7?

5. Resolving Stop (Blue Screen) errors in Windows 7: Resolving stop (blue screen) errors in Windows 7

6. Uninstall Norton A/V software.

7. If all else fails, you'll have to consider a factory restore to recover your computer to its out-of-box state.
My System SpecsSystem Spec
Reply

 Computer startup errors




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Event log errors on startup
I have recently taken over a Win7 machine. Through numerous AV tools at it and it is all clean and working. I do however have some errors in the log which arise on each reboot and try as I may I cannot find the cause. system.msc, autoruns, Microsoft help etc have not enabled me to eliminate these....
General Discussion
Event log 3 errors after startup
Hello. I have attached a file of Event log which has 3 errors that happens every time when I start my pc and shows my desktop. Please help. Please do not give option of formating pc. Thank you.
General Discussion
custom orb errors startup
I decided I would change my start orb and it did work. But now every time I start my computer up I get explorer errors about it couldn't find certain files or something but then after I spam the enter button for ok to confirm I know, my computer works fine. Just kind of annoying to see it every...
Customization
Can this bios startup item be disabled at computer startup
The attached jpg is the 1st item that launches in the bios screens at system star-up. This I think is the driver for a pci card I have installed in a slot in the box that controls (ie-adds another ide port) a second ide CD/DVD drive. Besides removing the card from the box...is there a way in...
Hardware & Devices
Multiple BSOD errors almost every startup >zipfile
Hello, I get these BSOD errors and there are a lot of them. It comes up almost every reboort but sometimes it goes good for a long time until I restart. Some of the errors: 0x0000001D 0x00000019 0x0000001E 0x000000C9
BSOD Help and Support
Run DLL errors on startup
I recently had a nasty virus on my laptop, which I eventually managed to get rid of and salvage the machine, but now I am getting several Run DLL errors on startup: 1. There was a problem starting C:\Windows\system32\msreaayl.dll The specified module could not be found. 2. There was a...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 13:36.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App