Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD After New Hardware is Installed

22 Jan 2012   #1
Twitchity

Windows 7 Home Premium 64 bit
 
 
BSOD After New Hardware is Installed

Recently I've been having an issue with a BSOD every time I install a new piece of hardware. I purchased a new keyboard and after windows installed the driver I got a BSOD. I bought a new mouse and after windows installed the drivers I got a BSOD. I has also happened a few times when I opened a program for the first time after I got finished installing it. After I get the BSOD once I never have the problem again until I add something new to my computer where I will then receive the BSOD once then it will work fine.

The computer is home built and consists of:
AMD Phenom II 2.8ghz processor
XFX Radeon HD 6870 1gb DDR5 256bit video card
6gb DDR3 Ram 1333 (forget the brand)
Gigabyte Motherboard
Samsung Solid State Drive where Windows 7 is installed and all of my drivers
500gb Seagate Sata Hard Drive where all my programs are installed to

I'm running Windows 7 Home Premium 64bit. Attached will be the most recent dump files. If anyone is able to point me in the right direction to solve this problem I'd appreciate it.


My System SpecsSystem Spec
.
23 Jan 2012   #2
JMH

Win 7 Ultimate 64-bit. SP1.
 
 

These crashes were caused by a memory exception.
Please run these two tests to verify your memory and find which driver is causing the problem.

If you are overclocking anything reset to default before running these tests.
In other words STOP!!!



1-Memtest.
Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.

RAM - Test with Memtest86+



2-Driver verifier

Quote:
Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.
Driver Verifier - Enable and Disable


Further Reading
Using Driver Verifier to identify issues with Windows drivers for advanced users
My System SpecsSystem Spec
Reply

 BSOD After New Hardware is Installed




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Re installed windows 7 but now no Networking Hardware! Please Help!!
Hello everyone! Ok so i re installed windows 7 Home Premium x64 on my Packard Bell EasyNote Tk87. My problem now is i cannot connect to the internet, when i go to networking and sharing it says 'Windows did not detect any networking hardware'. If i go into device manager I have yellow exclamations...
Installation & Setup
BSOD - No New Hardware Installed - No Software Updated
I have received the following BSOD - twice today and looking for any input please! BCCode: 109 BCP1: A3A039D89E93B99D BCP2: B3B7465EF11188DB BCP3: FFFFF80004031000 BCP4: 0000000000000001 OS Version: 6_1_7601 Service Pack: 1_0 Product: 256_1
BSOD Help and Support
Kernal Power Event ID 41 BSOD playing games, installed new hardware
Ladies and gentlemen, I've come with hopes that one of you can help me before money needs to be involved. I own an HP Pavilion p7-1017cb home desktop, with the following specs: Processor: Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz Motherboard: Pegatron Corp. 2AC2 HDD: 1TB SATA generic hard disk...
BSOD Help and Support
BSOD seemingly randomly. No new apps or hardware installed
System info: - Windows 7 Ultimate x64 - It is the original installed OS on the system - It is full retail version - Age of system (hardware) is approximately 6 months - What is the age of OS installation is approximately 6 months - I have not re-installed the OS since the initial build. ...
BSOD Help and Support
Random reoccurring BSOD since I installed new hardware
About a month ago I updated some hardware in my PC which I built in the summer of 2009. Here is the list of changes: AMD Phenom II X3 720 upgraded to AMD Phenom II X4 965 XFX Radeon HD 4870 upgraded to EVGA GeForce GTX 560 Ti G.Skill 2x2GB DDR3 1333 upgraded to G.Skill 4x2GB DDR3 1333 (all...
BSOD Help and Support
Problem with new installed hardware
Hello, I recently bought some new hardware and I installed them by myself. But I faced a few problems. 1- I always install both windows XP and 7, but on the new device when I want to install XP SP3, after loading installation files bluescreen error apears: A problem has been detected and...
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:31.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App