Fatal error: Verification of knownDll failed.

Hi all,

Have an Advent laptop here, BSODing when booting with the error message above.

Cannot run in safe mode and any start up repair attempts have failed.

I have run disk checks both in the Windows start up tool and in Linux and they both say no problems but when I try a system restore it says there is one. Here is the .dmp file and the laptops specs.

I also ran sfc /scannow but everytime I do I get a message saying there is a repari waiting for me to restart the laptop and that's all I ever get.

The start up repair gives the information below.0

Sorry I couldn't display the error logs better but I cannot figure out how to read them.

Thanks a lot,
StubbyHS

Specs:
Windows 7 HE
4GB RAM
Celeron T3500
320GB HDD

Startup Repair log:

Event name:StartupRepairOffline
PS1 - 6.1.7600.16385
PS2 - 6.1.7600.16385
PS3 - unknown
PS4 - 21200327
PS5 - AutoFailover
PS6 - 2
PS7 - BadPatch

The information you provided was rather vague. Please follow the http://www.sevenforums.com/crashes-debugging/96879-blue-screen-death-bsod-posting-instructions.html to provide us with more information. Thank you.

If you are unable to boot into Windows and startup repair keeps saying it needs to be run, see http://www.sevenforums.com/tutorials/139576-startup-repair-infinite-loop-recovery.html for a good method to resolve the issue.

Thanks, doing that now. Just a quick note to say that my D:\Windows\System32\config\regback\default folder is on 782kB's, and \Sam and \Security are only 24.5kBs big.

stubbyhs said:

Thanks, doing that now. Just a quick note to say that my D:\Windows\System32\config\regback\default folder is on 782kB's, and \Sam and \Security are only 24.5kBs big.

Click to expand...

You should not proceed, then. We'll need to get SFC /SCANNOW working. There are two files you will need to delete to get it working. I need to determine what two files those are. Bear with me while I do some research.

writhziden said:

The information you provided was rather vague. Please follow the http://www.sevenforums.com/crashes-debugging/96879-blue-screen-death-bsod-posting-instructions.html to provide us with more information. Thank you.

Click to expand...

Sorry I forgot to mention that I can't run these tools as I cannot boot up. Is there anything I can do to the .dmp file to make it readable?

writhziden said:

If you are unable to boot into Windows and startup repair keeps saying it needs to be run, see http://www.sevenforums.com/tutorials/139576-startup-repair-infinite-loop-recovery.html for a good method to resolve the issue.

Click to expand...

No dice. But like I said, the file sizes weren't as the guide said they should be. ANy ideas?

How many times have you run a startup repair?

Have you tried the boot using Last Known Good Configuration option?

Mike's Technology and Finance Blog: How to Perform an Offline System Integrity Verification is also good further reading. These forums have a similar tutorial: http://www.sevenforums.com/tutorials/139810-sfc-scannow-run-command-prompt-boot.html

stubbyhs said:

Sorry I forgot to mention that I can't run these tools as I cannot boot up. Is there anything I can do to the .dmp file to make it readable?

Click to expand...

Yeah, I was a little confused until I read the post a third time and realized you were having boot issues rather than just BSOD issues. There isn't anything to do to get the .dmp files until we can get your system running again. See my above post to provide us with more information and also for further reading to possibly get the system file check working.

writhziden said:

How many times have you run a startup repair?

Have you tried the boot using Last Known Good Configuration option?

Mike's Technology and Finance Blog: How to Perform an Offline System Integrity Verification is also good further reading.

Click to expand...

Yes run that as well.

Ehh 5 or 6? SHould I keep going?

I managed to get the dmp file copied onto a mem stick and have run the tool so the report is below, hope it helps!

I will read that article while you rack your brains

Thanks,
StubbyHS

Nah, the Startup Repair should complete within three times. More further reading: http://www.sevenforums.com/tutorials/105541-startup-repair-run-3-separate-times.html

Your blue screen crash was caused by AVAST. When you get your computer running, uninstall AVAST using the avast! Uninstall Utility and replace with Microsoft Security Essentials - Free Antivirus for Windows to run with Windows firewall.

Also, you may have hard disk errors. Use http://www.sevenforums.com/tutorials/666-advanced-boot-options.html to select Repair Your Computer and get to the http://www.sevenforums.com/tutorials/668-system-recovery-options.html. Then select the command prompt. Do the following:
.etc until you get the message that the volume could not be found. For any drives that do not give the message:
"Windows has checked the file system and found no problems"
run chkdsk again as above.

I realize you may only have one disk show up in Windows explorer, but you may have more than one disk through recovery options. This is because the system creates a hidden boot partition (which will be C: in recovery), you may have a recovery partition for your laptop that is hidden (which will be D: in recovery), and you will have your primary Windows partition (which may be E: in recovery).

Aha it's my friends laptop and I have it to fix it and remove AVAST as she doesn't like it and put on MSE.

The chkdsk is still running through D:, but it looks like it is doing something this time.

What does the /r command do and why did none of this work when I ran chkdsk on D: earlier?

Thanks a lot!

stubbyhs said:

Aha it's my friends laptop and I have it to fix it and remove AVAST as she doesn't like it and put on MSE.

The chkdsk is still running through D:, but it looks like it is doing something this time.

What does the /r command do and why did none of this work when I ran chkdsk on D: earlier?

Thanks a lot!

Click to expand...

/r recovers bad sectors on the hard disk. Hard disks have spare sectors built into them in case a sector is damaged, so what /r does is it reallocates the space to use a spare sector if it finds a bad sector and then tries to recover any data that might have been on the bad sector and write it to the spare sector. /r also run /f which fixes any file system errors (not to be confused with system file errors which are Windows file errors). File system errors are basically just corrupted data; the file system is the data and how the data is organized, and the errors correspond to that data being corrupted or its organization being corrupted.

Ah right, thanks for cleaing that up for me.

The scan has been stuck at 10% for a while now, I think that either it will stay there or need a lot of time to run, so I am going to have to leave it to run all night. I will check back with it tomorrow morning and post again.


Thanks again for your help!

stubbyhs said:

Ah right, thanks for cleaing that up for me.

The scan has been stuck at 10% for a while now, I think that either it will stay there or need a lot of time to run, so I am going to have to leave it to run all night. I will check back with it tomorrow morning and post again.


Thanks again for your help!

Click to expand...

You're welcome. And yes, the scan can take a while. I think my 500 GB drive took about 3-4 hours to run chkdsk /r when I ran it.

Update:

So I have run 3 checks now and midway through the 4th.

It gets stuck in stage 4 of 5 for about 1 1/2 hrs.

Should I keep going? Would a Windows Repair Disk help?

stubbyhs said:

Update:

So I have run 3 checks now and midway through the 4th.

It gets stuck in stage 4 of 5 for about 1 1/2 hrs.

Should I keep going? Would a Windows Repair Disk help?

Click to expand...

It may be the hard disk is failing. You should run any diagnostics provided by the manufacturer of the drive.
The following sites may be good references:
CrystalDiskInfo - Software - Crystal Dew World
HD Diagnostic

What were the results of the hard disk diagnostics?