Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: ntoskrnl.exe, ntfs.sys, etc. - Having BSODs for a year and a half

21 Feb 2012   #11
HelpComputer

Windows 7 Home Premium 64-bit
 
 

CPU-Z stats attached.

BIOS RAM settings (set to manufacturer's OC settings):

DRAM Timing: Both (not sure about this one)

1T/2T Timing: 2T (assumed 2T for more stability)

Unganged Mode

CL 8
tRCD 8
tRP 8
tRAS 24
All other settings default/auto

FSB/DRAM Ratio 1:4 (highest available) effective speed: 1600 MHz

Voltages - when set to auto, my BIOS doesn't give the exact value for some of these:

CPU VDD Voltage - Auto (something less than 1.10)
CPU NB VDD Voltage - Auto (something less than 1.10)
CPU Voltage - Auto (somewhere in-between 1.364 and 1.367)
CPU NB Voltage - Auto (somewhere in-between 1.099 and 1.102)
DRAM Voltage - 1.651 V (OVERCLOCKED to RAM's recommended settings)
NB Voltage - Auto 1.3 V
SB Voltage - Auto 1.1 V


My System SpecsSystem Spec
.
21 Feb 2012   #12
writhziden

Windows 7 Home Premium 64 Bit
 
 

For the above to work, the difference between NB Voltage and DRAM Voltage needs to be less than 0.5 Volts. To run the current setup, you can try bumping the NB Voltage to 1.2 or 1.25 V. Try 1.2 V first since it is more conservative. Bump to 1.25 V if needed.

If neither 1.2 or 1.25 V works, set the NB Voltage to 1.2 V and manually set the first four timings to 8-8-8-19 @ 2T and 609/1218 MHz with a manually set DRAM Voltage of 1.55 V to remove overclocking and provide conservative settings for the AMD processor. See if this runs stable.
My System SpecsSystem Spec
21 Feb 2012   #13
HelpComputer

Windows 7 Home Premium 64-bit
 
 

My BIOS only allows me to set my RAM speed on a ratio slider of 1:2, 1:2.66, 1:3.33, or 1:4 so I can't set my RAM to 609/1218 MHz when my base FSB frequency is 200MHz right? This means I'll have to adjust FSB frequency as well?
My System SpecsSystem Spec
.

21 Feb 2012   #14
writhziden

Windows 7 Home Premium 64 Bit
 
 

TBH, your frequencies are very strange. I'm going to look into those modules and see if I can find a stable solution for you.

Try 9-9-9-20 @2T 667/1333 MHz NB: 1.2 V

Or try 9-9-9-27 @2T 800/1600 MHz NB: 1.3 V

Also, I mistakenly said CPU NB Voltage when I meant NB Voltage. I have corrected my earlier post. I note you already have yours set to Auto at 1.3 V, but set it manually to 1.3 V.
My System SpecsSystem Spec
26 Feb 2012   #15
HelpComputer

Windows 7 Home Premium 64-bit
 
 

I have time today so I am going to try these settings; was wondering what my DRAM voltage should be for either setting?

The factory OC recommended setting is 1.65 and the Auto value is 1.60. I will try with Auto first.

Also, my NB Voltage is 1.3V by default; setting it to 1.2 for the 9-9-9-20 @ 667/1333 test first. The BIOS has the value of 1.2 in red saying it's "not recommended" but here we go, *nervous laugh*.

... Okay, system is up and running. Waiting for BSOD (but hopefully not). Going to run prime95.
My System SpecsSystem Spec
26 Feb 2012   #16
writhziden

Windows 7 Home Premium 64 Bit
 
 

Try Auto for DRAM as you said. If that does not work, we can help you adjust the settings.
My System SpecsSystem Spec
26 Feb 2012   #17
HelpComputer

Windows 7 Home Premium 64-bit
 
 

Ran an 80-minute test with prime 95; no errors no warnings. So far so good! Going to try other tasks now.
My System SpecsSystem Spec
26 Feb 2012   #18
writhziden

Windows 7 Home Premium 64 Bit
 
 

Sounds promising. Keep us posted. Best wishes!
My System SpecsSystem Spec
27 Feb 2012   #19
HelpComputer

Windows 7 Home Premium 64-bit
 
 

Got a Flash player plugin crash and then a Firefox crash typical of the old symptoms just now. Yuck.
My System SpecsSystem Spec
03 Mar 2012   #20
HelpComputer

Windows 7 Home Premium 64-bit
 
 

I gave both of these a shot over the past week and neither one is properly stable. Have had some graphics card hiccups, and BSODs. Want to try with the RAM @ 800 and 1066 Mhz... what settings should I select for these speeds?
My System SpecsSystem Spec
Reply

 ntoskrnl.exe, ntfs.sys, etc. - Having BSODs for a year and a half




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSODs in BF4 and other games. Ntoskrnl.exe 0x1a, 0x0a, 0x3b, ntfs.sys
Hello, I get random BSODs, especially when playing games, like Battlefield 4 and Alien: Isolation. When it doesn't blue screen, the games often stop working with an error message and quit to Windows. I tried using Bluescreen viewer to find out which driver was causing it, but the errors are varied...
BSOD Help and Support
Multiple different BSODs over a span of roughly a year and a half.
Hello all, I've been receiving intermittent BSODs for a long time now and I'm running out of ideas on what to try to get it fixed. I've reinstalled windows, I've replaced RAM, I've replaced my GPU and tried using other forums to get to the bottom of the issue to no avail. If you want to see...
BSOD Help and Support
Is the Intel 530 SSD worth buying for a two and half year old laptop?
I keep reading it's mediocre in performance compared to many others and i can't afford the 700 series, right now i just have a 5400 rpm hard drive that came with the laptop. I know Samsung is popular as well , is it superior to the Intel? Thanks folks
Hardware & Devices
Random BSODS, cause: ntoskrnl.exe, tcpip.sys, Ntfs.sys, dxgmms1.sys
Hello, I'm getting random BSODS mostly on startup and during casual browsing eg. tasks which isn't that demanding but also occasionally during gaming. I've searched around but I'm still clueless and I hope somebody is more familiar with these error codes than I am. Trying to debugg these...
BSOD Help and Support
Repeated BSODs from ntfs.sys, ntoskrnl.exe, and fltmgr.sys
I've had repeated BSODs for about a month. It stopped for about 3 days, but then started up again last night. They happen seemingly at random. It will crash when I'm not there, when I'm playing games (like League of Legends and DOSBox), or when I'm watching YouTube videos. It also has crashed when...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 01:39.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App