Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD - Most likely RAM issue

01 Apr 2012   #51
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Yes, one error on memtest86+ is too many, when memtest86+ freezes it is not a good sign.

Let's look at your RAM and memory controller settings first, sometimes adjusting the settings will make it stable.
These are important, post these voltage settings in your next post so we can proceed.
Check the CPU Over Voltage, Memory Over Voltage, (CPU/NB Voltage should be) VDDNB Over Voltage settings, and post them here.
In BIOS, Advanced > Jumper Free Configuration.

If you are having any problems finding these voltage settings, let me know.

Did you get a chance to get the 'warm' voltage settings?
Speed Fan is showing some strange 5v readings, check it with HWiNFO64, open the 'Sensors' tab.
Let HWiNFO64 run at cold idle and then when it warms up open your game to put some stress on the system, when through post the screen shot.


My System SpecsSystem Spec
.
09 Apr 2012   #52
Sabrac

Windows 7 Ultimate 64-Bit
 
 

Posting cold idle first.
My System SpecsSystem Spec
09 Apr 2012   #53
Sabrac

Windows 7 Ultimate 64-Bit
 
 

and here's the jumper configuration.
Somehow when I went back here, the 5-5-5-15 settings for my RAM reset back to auto.
My System SpecsSystem Spec
.

09 Apr 2012   #54
Sabrac

Windows 7 Ultimate 64-Bit
 
 

Not much of a difference warm than the cold here.
My System SpecsSystem Spec
09 Apr 2012   #55
Sabrac

Windows 7 Ultimate 64-Bit
 
 

POsting this weird distortion as well.
I can still move my mouse around but it's stuck on the loading wheel.
Then the background went black and it's on screenshot 2.
As soon as I closed these windows, I blue screened.
Now I've been running memtest86+ since I blue screened with no errors.
My System SpecsSystem Spec
10 Apr 2012   #56
Sabrac

Windows 7 Ultimate 64-Bit
 
 

Here's the HW64 after running WoW for a while.
My System SpecsSystem Spec
11 Apr 2012   #57
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Go to your BIOS and get/post the, DRAM frequency and VDDNB Over Voltage, if no voltage number is shown then change it to 'Manual' to get the reading.
Are you selecting 'Exit and Save Changes' after changing BIOS settings?
Confirm your DRAM Voltage is 1.80v.
Your previous BIOS screen shot is showing 'Memory Over Voltage' is on 'Auto'.

Change your 'CPU Over Voltage' to +0.005v.


The various issues you are having may indicate the PSU voltage is not sufficiently stable, we may need to come back to this.
My System SpecsSystem Spec
13 Apr 2012   #58
Sabrac

Windows 7 Ultimate 64-Bit
 
 

Managed to change them.
I was exiting out then trying to save instead of just saving before I left the jumper config.
I'm not getting anymore hangs/black outs as of yet, but as with this computer, there's always a new thing that pops up.
Got a few dumps from the past 2 days.
I looked up the LGVirHid.sys and it seems to have to do with my Logitech drivers, but my Logitech drivers are up to date.
My System SpecsSystem Spec
13 Apr 2012   #59
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Can you confirm what you changed and to what setting (voltage, etc.) amount.

Three of your crashes were:
Code:
SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
STOP 0x0000003B: SYSTEM_SERVICE_EXCEPTION  
Usual causes:  System service, Device driver, graphics driver, ?memory
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
IMAGE_NAME:  memory_corruption
These all look like they are caused by memory corruption.
The RAM settings should take care of these.

Code:
IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.
READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80003714100
GetUlongFromAddress: unable to read from fffff800037141c0
 fffff6ff30000008 Nonpaged pool
IMAGE_NAME:  memory_corruption
FAILURE_BUCKET_ID:  X64_0xA_nt!MiObtainSystemCacheView+186
Looks like the same cause as above.

Drivers that need updating:
Code:
AtiPcie  AtiPcie.sys  Tue May 05 23:00:22 2009
Make sure you have the latest Asus Chipset driver.

Code:
GEARAspiWDM GEARAspiWDM.sys Mon May 18 20:17:04 2009
Uninstall iTunes and get the latest version. This driver is known to cause crashes with Win7.

Code:
mcdbus   mcdbus.sys   Tue Feb 24 18:34:07 2009
Uninstall MagicISO and install the latest version. This driver is out of date.

If the LGVirHid.sys driver was implicated in a crash somewhere, it is likely the result of the crash and not the cause.

Let us know if you get any more crashes.
My System SpecsSystem Spec
13 Apr 2012   #60
Sabrac

Windows 7 Ultimate 64-Bit
 
 

My RAM
Basically I set the 5-5-5-15 as the past screenshot shows and the MemoryOverVoltage is set to 1.8v.
I think the memory corruption dumps were before I had put in the voltage and timing settings, so hopefully those won't resurface.
I assume since I got a new graphics card, that's where the chipset drivers were having an issue.
I also just uninstalled MagicDisc since I don't use it anymore, so that's done with.
And I'm installing the newest iTunes now.
My System SpecsSystem Spec
Reply

 BSOD - Most likely RAM issue




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD randomly (no specific trigger) Commonly an IRQL issue on BSOD
Hi, My computer has been unstable for quite some time and after memory tests, changing graphics cards, many driver variations and a couple of fresh OS installs a while ago it is still not stable. The difficulty is that it doesn't seem to be triggered by anything specific so it makes debugging...
BSOD Help and Support
BSOD & Non-BSOD Crashes, Display Driver Issue?
I'm running: Windows 7 Home Premium, 64-bit, OEM, never reinstalled HP model #p6654y, approx. 1 year old, no major problems until now I've attached the BSOD Dump and System File Collection, but Windows refuses to produce a System Health Report because I have to run in safe mode. If you have...
BSOD Help and Support
Need help with a BSOD issue.
I recently built a new pc but I seem to be randomly getting BSOD errors infrequently every day or so. I have a full retail version of Windows 7 Ultimate 64 bit os. All my specs are in my profile. Thanks for any and all help!
BSOD Help and Support
Another BSOD issue... please help.
This is the first pc I ever built, has been BSOD from day one. Any help is greatly appreciated.
BSOD Help and Support
BSOD Issue.. HELP
This pops up when I play a video file. It doesn't happen all the time, so i wouldn't say whenever. Still, it only pops up when i play video files. I am not overclocking, I thought that might be the case so I set it back to factory clocks. Any help?... I hate this BSOD.
BSOD Help and Support
BSOD issue
Hey everybody. I'm having an identical problem as this guy: http://www.sevenforums.com/crashes-debugging/54063-windows-7-bsod-issue-dmp-attached.html. It happens mostly after coming out of standby, just like him. Mine's a Toshiba L355D-S7825. I've been having BSODs since I bought the thing,...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 14:05.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App