Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD after fresh install

04 Feb 2012   #21
carwiz

Windows 7 Pro-x64
 
 

Ops! Mgorman posted while I was trying to find the link to Memtest.

Sounds like a good start.


My System SpecsSystem Spec
.
05 Feb 2012   #22
carlocgc

Windows 7 Home Premium 64-bit (Installed: Apr 2012)
 
 

Memtest 86+ ran overnight no errors found. i have used memok button a few months ago to change frequency of RAM to get it to boot but that was with my old ram set wondering if thats causing an issue ill admit to not knowing what i was doing with that. any other ideas appreciated. also how would i get rid of the AODdriver cant seem to find it anywhere

UPDATE: ive found an active process and file in windows folder DOADx.exe through task manager (has a 'barcode' thumbnail) seems to be part of overdrive utility or perhaps part of realtek gigabit ethernet controller package

DAODx.exe Windows process - What is it?

I installed the realtek optionally through windows update in error (if its the ethernet controller driver listed in programs - control panel) as im not using ethernet to connect to the net nor do i intend to can this file and process be removed safely or do i need this realtek ethernet package.

UPDATE: seems DAODx.exe could also be linked to TURBOV EVO or EPU utilities that came with motherboard ill remove them

removed utilities that came with motherboard one overclocks the cpu and the other controls fan speeds both akin to the overdrive program. DOADx file still remains in windows folder and process still runs. dunno whether to remove realtek or not. computer has worked fine for about 36 hours now with no bluescreen
My System SpecsSystem Spec
05 Feb 2012   #23
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Un-install any Asus utilities, these are known to cause crashes.

Just leave the realtek driver installed.

If you're not getting any more crashes, use your system normally and post if you get any issues.


If you get any more crashes we can take a look at your CPU and RAM settings.

D/L CPUZ and post a snip of the CPU, Mainboard, Memory, and SPD tabs.
For posting the information , enter 'Snipping tool' in the Start button > Search box, hit enter. Select the area you want to post and save to a convenient place.
How to Post a Screenshot in Seven Forums

Have you been checking your temperatures?
Use Core Temp, to check the CPU temps when at idle, under load and/or testing.
Let us know the minimum and maximum temps you get.

Go to your BIOS and tell us what the CPU, RAM and the CPU integrated memory controller voltages are.
My System SpecsSystem Spec
.

05 Feb 2012   #24
carlocgc

Windows 7 Home Premium 64-bit (Installed: Apr 2012)
 
 

running core temp today. here are cpu pics im having trouble finding voltages in bios. thanks for the reply
My System SpecsSystem Spec
05 Feb 2012   #25
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Please post them so we can all see them.

For posting the information , enter 'Snipping tool' in the Start button > Search box, hit enter. Select the area you want to post and save to a convenient place.
How to Post a Screenshot in Seven Forums

Attachment 196868 Attachment 196869

Attachment 196870 Attachment 196871


The voltages are in AI Tweaker,
CPU Offset Voltage
CPU/NB Offset Voltage
DRAM Voltage


Are the DRAM Frequencies set to 'Auto' or entered in 'Manual'?
My System SpecsSystem Spec
05 Feb 2012   #26
carlocgc

Windows 7 Home Premium 64-bit (Installed: Apr 2012)
 
 

all are set to auto here are values

CPU offset : 1.356v

CPU NB offset: 1.175v

RAM : doesnt give specific voltage like the other too only info i can see is to the right in the menu panel
min: 1.20000v
max: 2.20000v
interval: 0.00625v
standard:1.50000v

sorry about the pics :s
My System SpecsSystem Spec
05 Feb 2012   #27
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

When you have more than 4GB RAM installed you may need to bump the CPU IMC (Integrated Memory Controller) voltage +0.10v.
Set the CPU/NB voltage to 'Manual' and 1.275v.

If you set the DRAM voltage to 'Manual' it should give you the current voltage, which looks like it's 1.50v.
Let us know what it is set at and leave it there for now, might need a bump later if your RAM is not stable.

What temps did CoreTemp give you at idle?
My System SpecsSystem Spec
05 Feb 2012   #28
carlocgc

Windows 7 Home Premium 64-bit (Installed: Apr 2012)
 
 

Attachment 196949 Attachment 196910
26c idle 41c load.
cpu/nb voltage changed to 1.275v
had 2 crashes before i changed it

thanks
My System SpecsSystem Spec
05 Feb 2012   #29
carlocgc

Windows 7 Home Premium 64-bit (Installed: Apr 2012)
 
 

still crashing BAD_POOL_HEADER crashed twice in safe mode with networking
My System SpecsSystem Spec
05 Feb 2012   #30
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Temps and RAM settings look good.

Can you uninstall the Asus utilities, all their drivers are still showing in your driver list.
These are known to cause crashes, remove them so we can rule that out as a cause.

These are programs from Asus, for example AMD OverDrive Utility.


Have you ran Hardware - Stress Test With Prime95 as suggested by mgorman87 in post #19.

When running the Torture Test - Blend, First open CoreTemp to monitor CPU temperatures, don't go over 75C.
Open Prime95 and stop the test if it is running, in Advanced tab select 'Round off checking', in the Options tab select 'Torture Test...', in the window that opens select 'Blend', after 'Number of torture test threads to run' enter 4, then click OK to start the test.
Temps permitting run for 2-3 hours.

*Note: Couldn't find the AMD Phenom II X4 960T CPU on the AMD processor site, must be discontinued.

If Prime95 passes then enable Driver Verifier as recommended by mgorman87 in post #14.
Please enable driver verifier
Driver Verifier - Enable and Disable
This should point out drivers that are causing the crashes.

Let us know the results.


Your latest crashes are inconclusive.
Code:
BAD_POOL_HEADER (19)
IMAGE_NAME:  ntkrnlmp.exe

KMODE_EXCEPTION_NOT_HANDLED (1e)
IMAGE_NAME:  rdyboost.sys

BAD_POOL_HEADER (19)
IMAGE_NAME:  Pool_Corruption

BAD_POOL_HEADER (19)
IMAGE_NAME:  ntkrnlmp.exe

DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
IMAGE_NAME:  Wdf01000.sys

MEMORY_MANAGEMENT (1a)
IMAGE_NAME:  ntkrnlmp.exe

BAD_POOL_HEADER (19)
IMAGE_NAME:  Pool_Corruption


This message is still in your perfmon report.
Quote   Quote: Originally Posted by mgorman87 View Post
This is in your prefmon report

Code:
Device is not present, not working properly, or does not have all of its drivers installed.
Cause:A device has a configuration problem that prevents it from working properly.
Details:The  device, AODDriver4.01, is reporting "tv_ConfigMgrErr24". 
This device  will not be available until the issue is resolved. The Plug and Play ID  for this device is ROOT\LEGACY_AODDRIVER4.01\0000.
Resolution:
1. Verify the correct driver is installed.
2. Try updating the drivers using Windows Update.
3. Check with the manufacturer for an updated driver.
4. Attempt to uninstall and then reinstall the device using Device Manager.
It doesn't look like you got AODDriver removed properly.
My System SpecsSystem Spec
Reply

 BSOD after fresh install




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD playing Guild Wars 2, recent SSD install and fresh install of W7
I just added a new SSD drive and installed a fresh copy of Win 7 Enterprise. I have had a previous driver issue with this system in the past. The amazing people on this site helped me work it out. Now for the life I just can't seem to sort it out again myself this time. I ran and uploaded the...
BSOD Help and Support
BSOD on fresh install when install updates, misc error codes
My system info is in my profile, installing Windows 7 x64 Ultimate Retail. Attached is all of the report info. I have no idea what is going on. Whenever I try to install all of the Windows updates it blue screens. Then it will reboot, try to apply the updates, and blue screen again. I've run...
BSOD Help and Support
BSOD for a while now Fresh install and I get another one
First off I think it's my graphic card drivers that have been giving me problems so in a fresh install I hoped to fix that but I had one BSOD last night. I would be thankful if someone could have a quick look at my dumps. It says I'm not using a virus program in the file but I am using Microsoft...
BSOD Help and Support
BSOD on fresh install
Hi, I reformatted and installed a fresh copy of Win7 Pro x64 on my PC because it was having BSOD issues and then reinstalled my chipset, network, and audio drivers. Not long after installing only those things I experienced another BSOD. I'm not sure what caused it but I'm 100% sure its not my RAM...
BSOD Help and Support
BSOD crashes after fresh install of 7 64bit install
Hello from a first timer here. I'm using HP pavilion DV7-1195nr, 4gig, 9600m gt 1gig. I had Vista 64bit Prem. that ran just fine, and I did the Win 7 Prem. upgrade. It seems to run smooth until I started getting bsod. I decided to do a full install of Win 7 Prem from my upgrade disc. I...
BSOD Help and Support
Random BSOD - Fresh install, fresh system
Hi. I have installed a whole new windows 7 pro x64. My new mobo an ASus p5e3 pro along with new ram pc12800 gskill 2x2 ddr3 (running in 1066mhz due to my q6600) Everythingi s running perfectly...except some random BSOD. 4 total this week. I have posted a pack of dump file in here, the last 4...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 01:14.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App