Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD after fresh install

14 Feb 2012   #51
carlocgc

Windows 7 Home Premium 64-bit (Installed: Apr 2012)
 
 

still crashing the same way. crashes upto 10 minutes after closing a demanding application displays a very horizontally jagged greenish screen then blue screen but will run fine as long as application is running. sometimes struggles to reboot and will crash even in safe mode!! will boot if left a while or disconnected from mains.


My System SpecsSystem Spec
.
15 Feb 2012   #52
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Your BIOS version is 1005.
There are some stability updates, new newest version is 2001.
If you haven't flashed your BIOS before let us know, if it's not done correctly it can cause your motherboard to become non-functional.
Don't try to update it until you are sure your system is stable and won't crash during the flashing.

Take out 2 RAM cards, for testing purposes.
Leave the 2 RAM cards in either the two blue slots or the two black slots.

Bump your DRAM voltage to 1.55v.
Bump your CPU/NB voltage to 1.325v.

If you get another crash take the 2 RAM cards out and put the other two RAM cards in the other two slots.
You want to test two RAM cards in two (same color) slots, then test the other two RAM cards in different slots.


You are going to have to test the graphics card, I think this is the cause of your issues.
Is there someone that will let you put your graphics card in their computer for testing?
Or can you borrow one to put in your system for testing?
It's the graphics card or possibly the motherboard.

Let's trouble shoot the peripheral devices.
Take out any/all unnecessary devices, if you have a USB wireless take it out and connect with cable, disconnect any USB hubs, remove any sound cards/recievers, unplug your USB external HDD, if you get any more crashes replace keyboard and mouse with known good ones for testing.

Code:
PAGE_FAULT_IN_NONPAGED_AREA (50)
Usual causes:  Defective hardware (particularly memory - but not just RAM), Faulty system service, Antivirus,  Device driver, NTFS corruption, BIOS
Arg1: fffff8e002fd59bc, memory referenced.
Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
Arg3: fffff80002dc8fa2, If non-zero, the instruction address which referenced the bad memory address.
WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff80002ecc100, fffff8e002fd59bc
IMAGE_NAME:  ntkrnlmp.exe
Still getting this error warning:
Code:
The device, AODDriver4.01, is reporting "tv_ConfigMgrErr24". This device will not be available until the issue is resolved. The Plug and Play ID for this device is ROOT\LEGACY_AODDRIVER4.01\0000.
My System SpecsSystem Spec
16 Feb 2012   #53
carlocgc

Windows 7 Home Premium 64-bit (Installed: Apr 2012)
 
 

Ill test RAM and USB.

Voltages increased
(seems as though RAM was at 1.2v when i swapped to manual!! Not 1.5v)

DRAM = 1.55v
CPU/NB = 1.325v
Removed both RAM from B slot.

I dont have a spare card or even on board graphics so i cant test that.

I do have an old motherboard Biostar GF 8600e GF8200E :: Motherboard :: BIOSTAR

My system should be stable enough to update bios only crashes after its been stressed for an hour or so.

Thanks again

AOD error is connected to display, got rid of it once but its back since rolling back display driver
My System SpecsSystem Spec
.

16 Feb 2012   #54
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Yes, change the DRAM voltage to 1.55v and the CPU/NB voltage to 1.325v.
Then test the RAM.

You have a issue with your graphics card, can you RMA it?

Did you trouble shoot the peripheral devices?
Take out any/all unnecessary devices, if you have a USB wireless take it out and connect with cable, disconnect any USB hubs, remove any sound cards/recievers, unplug your USB external HDD, if you get any more crashes replace keyboard and mouse with known good ones for testing.

Go to your BIOS and tell me the frequency and voltage information.
CPU/NB frequency
HT Link speed
HT voltage
NB voltage
My System SpecsSystem Spec
16 Feb 2012   #55
carlocgc

Windows 7 Home Premium 64-bit (Installed: Apr 2012)
 
 

CPU/NB frequency 1400mhz
HT Link speed 200 mhz
HT voltage 1.2v
NB voltage 1.1v

All usb disconnected
My System SpecsSystem Spec
16 Feb 2012   #56
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Set your HT voltage to 1.25v and the NB voltage to 1.15v.

Your CPUZ CPU tab in post #25 shows the HT Link at 2006.7 MHz, which is where it should be set at, so it's good.

Your CPU/NB frequency should be equal to or higher than the HT Link speed.
Set the CPU/NB frequency to 2000MHz.

Save and exit BIOS.
My System SpecsSystem Spec
16 Feb 2012   #57
carlocgc

Windows 7 Home Premium 64-bit (Installed: Apr 2012)
 
 

done
My System SpecsSystem Spec
16 Feb 2012   #58
carlocgc

Windows 7 Home Premium 64-bit (Installed: Apr 2012)
 
 

another crash.
swapping RAM
My System SpecsSystem Spec
17 Feb 2012   #59
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Let's change the graphics driver again.
Same procedure as in post #46.
Use AMD Catalyst™ Display Driver 11.2
Install Driver only, no CCC.

Then check if the AODDriver is still there.

Code:
KMODE_EXCEPTION_NOT_HANDLED (1e)
This is a very common bugcheck.
Usual causes:  Device driver, hardware, System service, compatibility, Remote control programs, memory, BIOS
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
LAST_CONTROL_TRANSFER:  from fffff80002ce4588 to fffff80002c98c40
MODULE_NAME: Pool_Corruption
Can you confirm, this crash was with 2 X 2GB RAM cards installed, now you have taken those two out and put the other 2 X 2GB RAM cards in different slots.

Do you have Windows Update set to 'Install Automatically' or 'D/L and let me choose'?
Windows might be installing a graphics driver after you have already installed one.
If not already on 'D/L and let me choose', change it.

From your System Event Logs:

Code:
Event[51]:
  Log Name: System
  Source: Service Control Manager
  Date: 2012-02-16T20:36:50.910
  Event ID: 7000
  Task: N/A
  Level: Error
  Opcode: N/A
  Keyword: Classic
  User: N/A
  User Name: N/A
  Computer: MMXII-II-PC
  Description: 
The AODDriver4.01 service failed to start due to the following error: 
The system cannot find the path specified.
There are a lot of these.
Code:
 AODDriver4.01 - AMD Overdrive; also in EasyTune6 for Gigabyte motherboard
Check if it still there after the graphics driver re-install.

Code:
Event[1334]:
  Log Name: System
  Source: Microsoft Antimalware
  Date: 2012-02-15T22:41:05.000
  Event ID: 3002
  Task: N/A
  Level: Error
  Opcode: Info
  Keyword: Classic
  User: N/A
  User Name: N/A
  Computer: MMXII-II-PC
  Description: 
Microsoft Antimalware Real-Time Protection feature has encountered an error and failed.
 	Feature: Behavior Monitoring
 	Error Code: 0x80004005
 	Error description: Unspecified error 
 	Reason: The filter driver requires an up-to-date engine in order to function. You must install the latest definition updates in order to enable real-time protection.
Check Windows Update for MSE.
My System SpecsSystem Spec
04 Mar 2012   #60
carlocgc

Windows 7 Home Premium 64-bit (Installed: Apr 2012)
 
 

hi been a while since my last post still having problems with computer.

can confirm the last crashes were with the other 2 ram modules in. so no more to try there

windows is set to "Install Automatically" all updates. i changed it post rolling back driver so ill repeat the install and sweep now

updated MSE through itself if thats what u mean.

recent crashes were causing computer not to boot removing all RAM modules and reinstalling them allowed it to boot.
My System SpecsSystem Spec
Reply

 BSOD after fresh install




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD playing Guild Wars 2, recent SSD install and fresh install of W7
I just added a new SSD drive and installed a fresh copy of Win 7 Enterprise. I have had a previous driver issue with this system in the past. The amazing people on this site helped me work it out. Now for the life I just can't seem to sort it out again myself this time. I ran and uploaded the...
BSOD Help and Support
BSOD on fresh install when install updates, misc error codes
My system info is in my profile, installing Windows 7 x64 Ultimate Retail. Attached is all of the report info. I have no idea what is going on. Whenever I try to install all of the Windows updates it blue screens. Then it will reboot, try to apply the updates, and blue screen again. I've run...
BSOD Help and Support
BSOD for a while now Fresh install and I get another one
First off I think it's my graphic card drivers that have been giving me problems so in a fresh install I hoped to fix that but I had one BSOD last night. I would be thankful if someone could have a quick look at my dumps. It says I'm not using a virus program in the file but I am using Microsoft...
BSOD Help and Support
BSOD on fresh install
Hi, I reformatted and installed a fresh copy of Win7 Pro x64 on my PC because it was having BSOD issues and then reinstalled my chipset, network, and audio drivers. Not long after installing only those things I experienced another BSOD. I'm not sure what caused it but I'm 100% sure its not my RAM...
BSOD Help and Support
BSOD crashes after fresh install of 7 64bit install
Hello from a first timer here. I'm using HP pavilion DV7-1195nr, 4gig, 9600m gt 1gig. I had Vista 64bit Prem. that ran just fine, and I did the Win 7 Prem. upgrade. It seems to run smooth until I started getting bsod. I decided to do a full install of Win 7 Prem from my upgrade disc. I...
BSOD Help and Support
Random BSOD - Fresh install, fresh system
Hi. I have installed a whole new windows 7 pro x64. My new mobo an ASus p5e3 pro along with new ram pc12800 gskill 2x2 ddr3 (running in 1066mhz due to my q6600) Everythingi s running perfectly...except some random BSOD. 4 total this week. I have posted a pack of dump file in here, the last 4...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 03:36.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App