Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD after fresh install

06 Mar 2012   #61
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

It is still possible that your RAM may be indicated in the crashes.

Are you still using the USB wireless adapter?
What other USB devices are you using?
List them all.

You should get a PCI wireless card, those USB adapters can cause issues.

You had three crash dump files.
Code:
BUGCODE_USB_DRIVER (fe)
Usual causes:  USB device driver
This indicates that an error has occurred in a Universal Serial Bus (USB) driver.
USBBUGCODE_INVALID_PHYSICAL_ADDRESS The host controller is using a physical memory address that was not allocated by the USBport driver.
SYMBOL_NAME:  usbohci!OHCI_PollAsyncEndpoint+99
IMAGE_NAME:  usbohci.sys
FAILURE_BUCKET_ID:  X64_0xFE_INVALID_PHYSICAL_ADDR_usbohci!OHCI_PollAsyncEndpoint+99
-----------------------------------------------------------------------------------------------------------------------------------------------
BAD_POOL_HEADER (19)
The pool is already corrupt at the time of the current request.
This may or may not be due to the caller.
Usual causes:  Device driver
This indicates that a pool header is corrupt.
FOLLOWUP_NAME:  Pool_corruption
FAILURE_BUCKET_ID:  X64_0x19_3_nt!ExDeferredFreePool+cbb
----------------------------------------------------------------------------------------------------------------------------------------------
SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
An attempt was made to execute an illegal instruction.
Usual causes:  System service, Device driver, graphics driver, ?memory
This error has been linked to excessive paged pool usage and may occur due to user-mode graphics drivers crossing over and passing bad data to the kernel code.
SYMBOL_NAME:  atikmdag+3af900
FAILURE_BUCKET_ID:  X64_IP_MISALIGNED_atikmdag.sys
MODULE_NAME: hardware
Let's give your CPU a voltage bump.
Is your CPU offset voltage still at 1.356v?
If it is let's bump that up a little, to 1.375v.
This should help with any crashes caused by low idle CPU voltage.


My System SpecsSystem Spec
.
09 Mar 2012   #62
carlocgc

Windows 7 Home Premium 64-bit (Installed: Apr 2012)
 
 

All RAM has been tested.

I am using wireless adapter again but it was still crashing when i was using a wired connection....

USB devices
Xbox 360 pad
Wifi Dongle
Wired keyboard and mouse

I tested with no pad, dongle and different keyboard and mouse. still crashing

BIOS returned to default a while ago as i was met with "Overclocking failed" warning on startup

I will change them back with the increase and see

Many thanks
My System SpecsSystem Spec
10 Mar 2012   #63
carlocgc

Windows 7 Home Premium 64-bit (Installed: Apr 2012)
 
 

never got chance to change BIOS as a crash on shut down has corrupted C: Drive.

computer tries to check disk for consistency on boot but fails "Due to recently installed service package"? and requests i system restore

boots in safe mode but system restore fails because i haven't checked the disk for errors which i cant do because it fails...

any ideas?

thanks
My System SpecsSystem Spec
.

10 Mar 2012   #64
writhziden

Windows 7 Home Premium 64 Bit
 
 

Use Advanced Boot Options to select Repair Your Computer and get to the System Recovery Options. Then select the command prompt. Do the following:
chkdsk /r c:
chkdsk /r d:
chkdsk /r e:
chkdsk /r f:
.etc until you get the message that the volume could not be opened for direct access. For any drives that do not give the message:
Windows has checked the file system and found no problems
run chkdsk again as above. In other words, if it says:
Windows has made corrections to the file system
after running the disk check, run the disk check again.

I realize you may only have one disk show up in Windows explorer, but you may have more than one disk through recovery options. This is because the system creates a hidden boot partition (which will be C: in recovery), you may have a recovery partition for your PC that is hidden (which will be D: in recovery), and you will have your primary Windows partition (which may be E: in recovery). A custom PC will likely have at least C: and D: to scan.


If you are unable to get to the Recovery Environment (RE) using the above steps, you will need a repair disc to reach the RE. You can create a repair disc on any Windows 7 64-bit system; it does not matter whether it is Home Premium, Professional, Ultimate, etc. as long as it is 64-bit. System Repair Disc - Create
My System SpecsSystem Spec
11 Mar 2012   #65
carlocgc

Windows 7 Home Premium 64-bit (Installed: Apr 2012)
 
 

thanks HDD recovered still crashing however
My System SpecsSystem Spec
22 Mar 2012   #66
carlocgc

Windows 7 Home Premium 64-bit (Installed: Apr 2012)
 
 

here are recent crashes. any help appreciated
My System SpecsSystem Spec
22 Mar 2012   #67
writhziden

Windows 7 Home Premium 64 Bit
 
 

Have you checked if your hard disk is faulty? HD Diagnostic


Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [D:\Kingston\BSODDmpFiles\carlogc\Windows_NT6_BSOD_jcgriff2\031612-21450-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is: 
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.17727.amd64fre.win7sp1_gdr.111118-2330
Machine Name:
Kernel base = 0xfffff800`02c00000 PsLoadedModuleList = 0xfffff800`02e44650
Debug session time: Fri Mar 16 08:32:05.438 2012 (UTC - 6:00)
System Uptime: 0 days 1:03:55.983
Loading Kernel Symbols
...............................................................
................................................................
.............................
Loading User Symbols
Loading unloaded module list
.....
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1A, {41284, 3fa1001, 0, fffff70001080000}

Probably caused by : dxgmms1.sys ( dxgmms1!VIDMM_PROCESS_HEAP::Allocate+3dd )

Followup: MachineOwner
---------

2: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

MEMORY_MANAGEMENT (1a)
    # Any other values for parameter 1 must be individually examined.
Arguments:
Arg1: 0000000000041284, A PTE or the working set list is corrupt.
Arg2: 0000000003fa1001
Arg3: 0000000000000000
Arg4: fffff70001080000

Debugging Details:
------------------


BUGCHECK_STR:  0x1a_41284

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

PROCESS_NAME:  csrss.exe

CURRENT_IRQL:  0

LAST_CONTROL_TRANSFER:  from fffff80002cd3817 to fffff80002c7cd40

STACK_TEXT:  
fffff880`0883b6c8 fffff800`02cd3817 : 00000000`0000001a 00000000`00041284 00000000`03fa1001 00000000`00000000 : nt!KeBugCheckEx
fffff880`0883b6d0 fffff800`02cae200 : fffff700`01080000 00000000`000000f3 fffff880`0883b858 00000000`0425ffff : nt! ?? ::FNODOBFM::`string'+0x4ac3
fffff880`0883b710 fffff800`02c694bf : fffffa80`00000000 00000000`0425ffff 00000000`00000000 00000000`00000000 : nt!MiDeleteVirtualAddresses+0x4e8
fffff880`0883b8d0 fffff800`02c7bfd3 : ffffffff`ffffffff fffff880`0883bbb0 fffff880`0883bc18 00000000`00008000 : nt!NtFreeVirtualMemory+0x61f
fffff880`0883b9d0 fffff800`02c78570 : fffff880`0535efd5 00000001`40002e40 fffffa80`08b0f220 fffff8a0`02c9f010 : nt!KiSystemServiceCopyEnd+0x13
fffff880`0883bb68 fffff880`0535efd5 : 00000001`40002e40 fffffa80`08b0f220 fffff8a0`02c9f010 00000000`c0000017 : nt!KiServiceLinkage
fffff880`0883bb70 fffff880`0534a974 : 00000000`00000174 00000000`00300000 fffff8a0`02bee0d0 00000000`000007ff : dxgmms1!VIDMM_PROCESS_HEAP::Allocate+0x3dd
fffff880`0883bc10 fffff880`05344f38 : 00000000`00000000 00000000`00000000 fffffa80`0b9bf000 fffff8a0`02bee0d0 : dxgmms1!VIDMM_GLOBAL::OpenLocalAllocation+0x570
fffff880`0883bcb0 fffff880`0532baa7 : fffff8a0`0b2ca770 fffff8a0`02f45910 fffff880`0883be20 00000000`00000000 : dxgmms1!VIDMM_GLOBAL::OpenOneAllocation+0x268
fffff880`0883bd90 fffff880`042d1469 : 00000000`00000000 fffff880`0883c260 00000000`00000000 fffff8a0`09c7f6a0 : dxgmms1!VidMmOpenAllocation+0xeb
fffff880`0883bde0 fffff880`042ca610 : fffff880`0883c048 fffff8a0`0b69d4e0 fffff880`0883c220 fffff880`0883c220 : dxgkrnl!DXGDEVICE::CreateVidMmAllocations<_DXGK_ALLOCATIONINFO>+0x291
fffff880`0883be70 fffff880`042cc2ef : fffff8a0`083b4000 fffff880`0883c4d0 00000000`00000000 fffff8a0`083b4000 : dxgkrnl!DXGDEVICE::CreateAllocation+0xca8
fffff880`0883c470 fffff880`042d24d5 : 00000000`00009000 00000000`00000001 00000000`00000000 00000000`00000004 : dxgkrnl!DXGDEVICE::CreateStandardAllocation+0x367
fffff880`0883c5d0 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : dxgkrnl!DxgkCddEnable+0x3f9


STACK_COMMAND:  kb

FOLLOWUP_IP: 
dxgmms1!VIDMM_PROCESS_HEAP::Allocate+3dd
fffff880`0535efd5 493bed          cmp     rbp,r13

SYMBOL_STACK_INDEX:  6

SYMBOL_NAME:  dxgmms1!VIDMM_PROCESS_HEAP::Allocate+3dd

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: dxgmms1

IMAGE_NAME:  dxgmms1.sys

DEBUG_FLR_IMAGE_TIMESTAMP:  4ce799c1

FAILURE_BUCKET_ID:  X64_0x1a_41284_dxgmms1!VIDMM_PROCESS_HEAP::Allocate+3dd

BUCKET_ID:  X64_0x1a_41284_dxgmms1!VIDMM_PROCESS_HEAP::Allocate+3dd

Followup: MachineOwner
---------
Crash points to DirectX/Graphics Card problems...
  • Try re-installing DirectX using the Download: DirectX Redist (June 2010) - Microsoft Download Center - Download Details and see how the system responds.

    Follow the steps for Diagnosing basic problems with DirectX. To re-install your display card drivers as outlined in the DirectX link, use the following steps.
    1. Download the latest drivers for your display card(s)
    2. Click Start Menu
    3. Right Click My Computer/Computer
    4. Click Manage
    5. Click Device Manager from the list on the left
    6. Expand Display adapters
    7. Do the following for each adapter (in case you have multiple display cards)
      • Right click the adapter
      • Click Uninstall (do not click OK in the dialog box that pops up after hitting Uninstall)
      • Put a tick in Delete driver software for this device (if this option is available, otherwise just hit OK) and hit OK
    8. Restart your computer after uninstalling drivers for all display cards
    9. Install the latest driver for the display cards once Windows starts

    Alternatively:
    1. Login as an adminstrative user
    2. Download the latest drivers for your display card(s)
    3. Click Start Menu
    4. Click Control Panel
    5. Click Hardware and Sound
    6. Click Device Manager (the last link under Devices and Printers)
    7. Expand Display adapters
    8. Do the following for each adapter (in case you have multiple display cards)
      • Right click the adapter
      • Click Uninstall (do not click OK in the dialog box that pops up after hitting Uninstall)
      • Put a tick in Delete driver software for this device (if this option is available, otherwise just hit OK) and hit OK
    9. Restart your computer after uninstalling drivers for all display cards
    10. Install the latest driver for the display cards once Windows starts


Hardware check:
My System SpecsSystem Spec
02 Apr 2012   #68
carlocgc

Windows 7 Home Premium 64-bit (Installed: Apr 2012)
 
 

video driver and dx updated stress tests ran no errors.
need to check hd next
any help with these crashes appreciated some new ones this time :s
My System SpecsSystem Spec
02 Apr 2012   #69
writhziden

Windows 7 Home Premium 64 Bit
 
 

Still getting memory corruption crashes... Hmmm... I saw that your wireless USB might have been to blame at one point. Let's try something new. Remove the wireless USB network adapter and use wired. Clean up all possible USB problems:
  • Start with USB Driver - General Fix for Problems to resolve the USB issues. Also, USB ports can sometimes enter a safe power state to protect the system from power surges due to USB devices. To reset the USB ports to a nominal power state:
    1. Shut down and turn off the computer.
    2. Unplug the computer from the wall or surge protector (then remove the battery if it is a
      laptop).
    3. Hold down the power button for 30 seconds. This closes the circuit and ensures all
      power from components is drained to clear the software connections between the BIOS
      and hardware and clear any corruption in the temporary memory.
    4. (If it is a laptop, plug the battery back into the laptop and then) Plug the computer back
      into the wall.
    5. Turn it on to reinitialize the software connections between the BIOS and hardwarelist]


Also, your latest crashes pointed to hard disk errors again as well as memory. Have you had a chance to run the manufacturer's diagnostic of the hard drive to see if it may be faulty? Run Hitachi's Drive Fitness Test on your hard disk.
My System SpecsSystem Spec
04 Apr 2012   #70
carlocgc

Windows 7 Home Premium 64-bit (Installed: Apr 2012)
 
 

hd diagnostic ran no errors.

tried using wired connection still crashes.

did power reset as you suggest still crashes.

at my wits end with this lol any ideas i still believe its a hardware problem either motherboard or GPU.

GPU isnt on QVL for Mobo think that could be it? also i only have a 550w psu and this card is giant.
i have funds to make changes or get a repair place to have a look. any advice appreciated.

any suggestions for replacing gpu or psu or mobo? or anything at all. i fear ive exhausted all software updating and stress testing

was goin to buy a cheap ass gpu to test with next. if still crashes that will leave Mobo HDD and RAM as potential problems correct?

is this a good idea ?

many thanks

P.S. noticed lowering DRAM voltage to 1.45 brings about alot more USB and memory crashes.
bumped it up to 1.55 now its a bit more stable still crashing though.
dunno if its relevent

P.S.S. all other voltages set to default except RAM. most crashes are resetting BIOS at this point.
My System SpecsSystem Spec
Reply

 BSOD after fresh install




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD playing Guild Wars 2, recent SSD install and fresh install of W7
I just added a new SSD drive and installed a fresh copy of Win 7 Enterprise. I have had a previous driver issue with this system in the past. The amazing people on this site helped me work it out. Now for the life I just can't seem to sort it out again myself this time. I ran and uploaded the...
BSOD Help and Support
BSOD on fresh install when install updates, misc error codes
My system info is in my profile, installing Windows 7 x64 Ultimate Retail. Attached is all of the report info. I have no idea what is going on. Whenever I try to install all of the Windows updates it blue screens. Then it will reboot, try to apply the updates, and blue screen again. I've run...
BSOD Help and Support
BSOD for a while now Fresh install and I get another one
First off I think it's my graphic card drivers that have been giving me problems so in a fresh install I hoped to fix that but I had one BSOD last night. I would be thankful if someone could have a quick look at my dumps. It says I'm not using a virus program in the file but I am using Microsoft...
BSOD Help and Support
BSOD on fresh install
Hi, I reformatted and installed a fresh copy of Win7 Pro x64 on my PC because it was having BSOD issues and then reinstalled my chipset, network, and audio drivers. Not long after installing only those things I experienced another BSOD. I'm not sure what caused it but I'm 100% sure its not my RAM...
BSOD Help and Support
BSOD crashes after fresh install of 7 64bit install
Hello from a first timer here. I'm using HP pavilion DV7-1195nr, 4gig, 9600m gt 1gig. I had Vista 64bit Prem. that ran just fine, and I did the Win 7 Prem. upgrade. It seems to run smooth until I started getting bsod. I decided to do a full install of Win 7 Prem from my upgrade disc. I...
BSOD Help and Support
Random BSOD - Fresh install, fresh system
Hi. I have installed a whole new windows 7 pro x64. My new mobo an ASus p5e3 pro along with new ram pc12800 gskill 2x2 ddr3 (running in 1066mhz due to my q6600) Everythingi s running perfectly...except some random BSOD. 4 total this week. I have posted a pack of dump file in here, the last 4...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 17:31.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App