Windows 7: BlueScreen Problem & graphics

examtot · 29 Jan 2012

Hello!

I dont now what happend with my PC only Bluescreen and Graphics not respondig everytimes

I will upload all my errors

JMH · 29 Jan 2012

Thank you for the information but...

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:

Quote:

* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.

To ensure minidumps are enabled:

Quote:

* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

examtot · 29 Jan 2012

Hello!

So thats all Minidumps.

JMH · 29 Jan 2012

> Please remove any CD visualization programs such as Daemon Tools and Alcohol 120%.

They use a driver, found in your dmp, called sptd.sys, that is notorious for causing BSODs.

Use this SPTD uninstaller DuplexSecure - Downloads DuplexSecure - FAQ

when you're done you can use this Freeware:

MagicISO Virtual CD/DVD-ROM (MagicDisc) in its place

Using MagicISO to create ISO image files

> SFC.
Refer Option 2.
You may have to run it up to 3 times...
SFC /SCANNOW Command - System File Checker

> Your .dmp file shows a stop error of 0x124 which is a general hardware error .

Quote:

A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint.

Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress

Some generic advice.

If you are overclocking STOP. Return to the default settings at least for now.
If you are running a RAID update its driver.

You can read more on this error and what to try here...

Stop 0x124 - what it means and what to try

examtot · 31 Jan 2012

Hello

I dont have any CD visualization programs , I installed DuplexSecure then it asked to reboot the PC i did it and done.
The next thing ,i maked 3 times sfc /scannow as administrator , Windows Resource Protectio did not find any Intergrity volations.I got ATI Readon 3800 HD Graphics and they are not overlocked ,also its default not overlocked

Now i am not getting not Bluescreen but something like "Catalyst Control Center is not responding" so when it happens i hear some noises from my headphones like ZzZZzZZZ ,then i see different colors in my Screen and then i need to restart PC

P.S Sorry for my bad English

examtot!

JMH · 31 Jan 2012

Submit any further DMP's for analysis via the method in my Post 2. ...

examtot · 03 Feb 2012

Hello!

I dont haved any BlueScreen for short but today i had 1 Bluescreen.I will upload 2 Minidumps and from an program called BluescreenView 2 files.

examtot!

JMH · 03 Feb 2012

> Please remove any CD visualization programs such as Daemon Tools and Alcohol 120%.

They use a driver, found in your dmp, called sptd.sys, that is notorious for causing BSODs.

Use this SPTD uninstaller DuplexSecure - Downloads DuplexSecure - FAQ

When finished you can use this Freeware:

MagicISO Virtual CD/DVD-ROM (MagicDisc) in its place

Using MagicISO to create ISO image files

> Your .dmp file shows a stop error of 0x124 which is a general hardware error .

Quote:

A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint.

Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress

Some generic advice.

If you are overclocking STOP.
Return to the default settings at least for now.
If you are running a RAID update its driver.

You can read more on this error and what to try here...

Stop 0x124 - what it means and what to try

examtot · 10 Feb 2012

I used SPTD uninstaller DuplexSecure i did sfc scannow nothing helps but i get this error only when i play games like Minecraft,Counter Strike 1.6 if you know

i reinstalled Win 7 doesnt helped

JMH · 10 Feb 2012

Quote:

If stop 0x124 errors persist, and the hardware is under warranty, consider returning it and requesting a replacement.
Be aware that attempting the subsequent hardware troubleshooting step may, in some cases, void your warranty:

Clean and carefully remove any dust from the inside of the machine. Reseat all connectors and memory modules.
Use a can of compressed air to clean out the RAM DIMM sockets as much as possible.

If all else fails, start removing items of hardware one-by-one in the hope that the culprit is something non-essential which can be removed. Obviously, this type of testing is a lot easier if you've got access to equivalent components in order to perform swaps.

Should you find yourself in the situation of having performed all of the steps above without a resolution of the symptom, unfortunately the most likely reason is because the error message is literally correct - something is fundamentally wrong with the machine's hardware.

Stop 0x124 - what it means and what to try

Windows 7: BlueScreen Problem & graphics

BlueScreen Problem & graphics problems?