Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Asus Restore CD's install, then give message "MBR1 Error"

30 Jan 2012   #1
skred

windows 7 home pemium 64 bit
 
 
Asus Restore CD's install, then give message "MBR1 Error"

Been everywhere trying to figure out this problem. Emachines ET-1831-03 box, with Intel ES-300 dual core 2.6 ghz processors,. Ran fine, then SATA Seagate 750 gb HD failed. Received the correct system restore CD's from both emachines and Asus. Attempted to reinstall Win7 home Premium 64 bit on alternative 80 gb WD IDE hard drive (having removed the defective 750 gb Seagate Barracuda 7200.11 from the machine). Also installed 2 gb DDR2 which tested fine, to insure no RAM errors. Recovery CD's go thru entire restore process, and say to remove the last CD and restart. On restart - I get only the black screen with the "MBR01 Error" message.
RAM has been tested. Obviously the motherboard and CPU are OK, because it loads the system CD, and does the complete recovery install process. I am a retired IT professional, and this is the first time I have been stymied by an operating system re-install. I've tried variations in the BIOS settings for about 10 tries, with the same negative results. What am I missing?


My System SpecsSystem Spec
.
31 Jan 2012   #2
theog

Microsoft Community Contributor Award Recipient

ME/XP/Vista/Win7
 
 

Try reinstall to SATA HD Drive, with Acer Recovery Disks.
My System SpecsSystem Spec
31 Jan 2012   #3
usasma
Microsoft MVP

 
 

Back several years ago, eMachines had a rash of motherboard problems and had to replace them.
I worked for 6 months on a customer's system until I'd replace nearly all parts (under warranty) and still had issues. I saw this guy daily for the entire 6 months.

When I finally gave up and sent it to the Service Center - it came back with a new mobo, and the guy hasn't been back in the shop since!!!

MBR01 Error isn't a Windows error - so it'd have to be an error with the Asus disks.
Are you trying to use the Asus disks to install on the eMachines? If so, it's likely that the Asus disks are locked to Asus systems only.
My System SpecsSystem Spec
.

31 Jan 2012   #4
skred

windows 7 home pemium 64 bit
 
 

Actually, theog solved the initial problem. Thanks!
I installed a WD SATA 160 gb drive, and the install went perfectly.... EXCEPT: now I cannot connect to the internet via my broadband. My XP machine connects just fine to the cable, but when I connect that same cable to the emachine's port, it tells me the cable is disconnected or some such... I downloaded the proper 64-bit drivers from Realtek (PCIE FE Family controller), and loaded them - same result. Message says disconnected cable. Device driver says NIC is working normallly. What's up?
My System SpecsSystem Spec
31 Jan 2012   #5
skred

windows 7 home pemium 64 bit
 
 

USASMA: Thanks for the suggestions. It could be the mobo... emachines had sent recovery disks for the specific machine, but because I was in error trying to install on an older IDE drive, I contacted Asus (Per emachines instructions) and they sent me a set of recovery disks which are exactly like the emachines version.. I know Asus manufactured this PC for emachines, but I think the mobo is ECS - who doesn't have a very good reputation at all.
Gonna try putting a pci NIC in the box and see what happens....
My System SpecsSystem Spec
31 Jan 2012   #6
theog

Microsoft Community Contributor Award Recipient

ME/XP/Vista/Win7
 
 

Quote:
it tells me the cable is disconnected or some such... I downloaded the proper 64-bit drivers from Realtek (PCIE FE Family controller), and loaded them - same result. Message says disconnected cable. Device driver says NIC is working normallly.
Do you have a spare Net card you could fit.

Quote:
I know Asus manufactured this PC for emachines,
Acer make eMachines.
My System SpecsSystem Spec
31 Jan 2012   #7
skred

windows 7 home pemium 64 bit
 
 

Well, I FINALLY solved the last problem. Seems the Cat5 socket on the emachine motherboard is a bit oversize, and when I tipped the plug up a bit - bingo - network was on. Junky hardware at best....
Acer politely told me I could send it back to them and for ONLY $199.000, they'd repair it. Never will buy another Acer product. Arrogant jerks!!!
Thanks for all your input - you solved what the manufacturer couldn't or wouldn't....
My System SpecsSystem Spec
31 Jan 2012   #8
theog

Microsoft Community Contributor Award Recipient

ME/XP/Vista/Win7
 
 

That is good news, well done.
My System SpecsSystem Spec
Reply

 Asus Restore CD's install, then give message "MBR1 Error"




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Can't do system restore - error message says "timed out"
Computer running extremely slow. Tried to do system restore but getting an error message that says "the creation of a shadow copy has timed out. Try this operation again. (0x81000101) - have tried again several times with no luck, Have read previous threads that say to clear restore points but am...
Backup and Restore
"operating system not found" message when trying to install windows 7
a friend of mine has a sony vaio laptop with windows 8 on it,but she wants windows 7(plus there is a problem with the laptop,the internet eplorer doesnt open,the window opens for half a second and then closes,and no internet-related application works).i first used a boot usb,configured the bios so...
Installation & Setup
all video files give error "class not registered" when trying to play
The title explains it all just restored my computer and now any kind of videos files i try to play give me the error "Class not registered" what do i do? btw, yes i did update all my video drivers.
Music, Pictures & Video
No "usb legacy support" "qfan" options on my asus laptop bios.
Entering the bios limits me to certain options. Is there anyway to access the other options? sorry, newbie here.
Performance & Maintenance
Error message "No drives found" on boot up after new build & install
Just completed my first build. I have two error messages during the boot sequence that I cannot resolve. The first screen shot during boot is the Asus logo. Next is a black screen that reads: "JMicron Technologies, PCI Express to SATA Host Controller ROM V1.07.23 Detecting drives; Done; No...
Installation & Setup
network error message: "Error code: 0x80070035". No file shareing help
I have had my vista pc and my windows 7 (basic) net book setup to let me share files (through an Netgear DG834PN Route) for around 18 months with no problems. However as of 3 days ago I can no longer do this and non of the network tools can fined or solve the problem. I can uses the internet...
Network & Sharing


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 13:32.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App