Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD, please help

01 Feb 2012   #1
Shons

Windows 7 Professional x64
 
 
BSOD, please help

can someone please tell me why i keep getting BSOD. here is my minidump


My System SpecsSystem Spec
.
01 Feb 2012   #2
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Welcome to Seven Forums Shons.

Please post the entire set of files requested below, these are necessary for us to help you.
Blue Screen of Death (BSOD) Posting Instructions

Can you post your specs.
Enter them in the 'My System Specs' dropbox at the lower left corner of any of your posts.
Use these links to find your system specs.
System Info - See Your System Specs
Or
Speccy Free System information Utility


STOP 0x000000D1: DRIVER_IRQL_NOT_LESS_OR_EQUAL
Usual causes: Device driver
This bug check is usually caused by drivers that have used improper addresses.
The driver blamed is LMouFilt.Sys - Logitech SetPoint HID Filter Driver

Download and install a new driver for your Logitech mouse.

Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: 0000057ff8720b18, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, value 0 = read operation, 1 = write operation
Arg4: fffff880049507c0, address which referenced memory

Debugging Details:
------------------
IMAGE_NAME:  LMouFilt.Sys
With more information we can look into it further.
My System SpecsSystem Spec
01 Feb 2012   #3
sali147

Windows 7 Ultimate 64bit
 
 

yes,this BOSD caused by this third party driver: Logitech SetPoint HID Filter Driver
Solution:Update your drivers that related to this one such as:
Logitech keyboards
Logitech mice
Logitech keyboard + mice combos
and so on
My System SpecsSystem Spec
.

02 Feb 2012   #4
Shons

Windows 7 Professional x64
 
 

Thanks for the fast reply. I downloaded new driver but got bsod again after some time. I have windows 7 x64, original full retail version. hardware is two years old, and i reinstalled OS 3 days ago. I'm not sure if you need this too, but when OS restarted, I've got this message

Quote:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 9242

Additional information about the problem:
BCCode: d1
BCP1: 000000000CB35430
BCP2: 0000000000000002
BCP3: 0000000000000001
BCP4: FFFFF88002DB3F52
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1
My System SpecsSystem Spec
02 Feb 2012   #5
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Same Stop code as last time STOP 0x000000D1: DRIVER_IRQL_NOT_LESS_OR_EQUAL
Usual causes: Device driver
This time it is blaming USBPORT.SYS - Windows USB 1.1 & 2.0 Port Driver
This is not the cause but the result of the crash.
Update all of your drivers from the Asus P5Q SE PLUS support site.

Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: 000000000cb35430, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, value 0 = read operation, 1 = write operation
Arg4: fffff88002db3f52, address which referenced memory

Debugging Details:
------------------
MODULE_NAME: USBPORT
IMAGE_NAME:  USBPORT.SYS

STOP 0x00000050: PAGE_FAULT_IN_NONPAGED_AREA
Usual causes: Defective hardware (particularly memory - but not just RAM), Faulty system service, Antivirus, Device driver, NTFS corruption, BIOS
Driver blamed is nvlddmkm.sys - nVidia Video drivers

Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced.  This cannot be protected by try-except,
it must be protected by a Probe.  Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: fffffa7fff144fab, memory referenced.
Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
Arg3: fffffa80079d8730, If non-zero, the instruction address which referenced the bad memory
	address.
Arg4: 0000000000000007, (reserved)

Debugging Details:
------------------
MODULE_NAME: nvlddmkm
IMAGE_NAME:  nvlddmkm.sys
Download the latest graphics driver from nVidia.
First uninstall the old ones.
Then run Driver Sweeper: How to Clean Left Over Driver Files with Driver Sweeper
Then install the new drivers.

If you have any issues, use this procedure and install an earlier version.


Old and problem drivers

Code:
AsIO.sys     Mon Dec 17 17:11:49 2007 - Asus PCProbe Utility
Asus utility drivers are known to cause crashes in Windows 7, and these are very old.
Uninstall all Asus utility programs.


Code:
emBDA64.sys  Fri Sep 12 14:21:35 2008 - USB 28xx BDA Driver by eMPIA Technology
Update all of your drivers from the Asus P5Q SE PLUS support site.


Code:
pcouffin.sys Tue Dec 05 22:39:30 2006 - low level access layer for CD devices (A part of many different CD/DVD burning programs)
Uninstall the CD burning program or rename to pcouffin.BAK and see what CD/DVD program it breaks.
My System SpecsSystem Spec
Reply

 BSOD, please help




Thread Tools Search this Thread
Search this Thread:

Advanced Search



Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 20:31.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App