Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: It makes no sense to me


03 Feb 2012   #1

Windows 7 32bit Ultimate
 
 
BSoD Errors

Hi my name is Cristian Robert and i am pretty close to go mental.

I have a Computer..

Is Windows 7 . . . - x86 (32-bit) or x64 ?::::::: x32 bit/86...i have no idea <,< - the original installed OS on the system? NO - an OEM or full retail version? Yes - What is the age of system (Not old/3-4 months)? - What is the age of OS installation (1 month?)

So 2-3 Months ago i had some problems with my computer..here is a example/.

:Normal day
:I try to start my computer by pressing the big On/off button
:it starts
:and then it restarts,the monitor is showing "No signal"
:the comp tries to start again/restarting
:third time it works
:some information about megatrends..bios..something about the motherboard
:then after that its supposed to show the windows 7 logo but it stays black for 2-3 seconds then BSoD' and restart
:no more Quick restart but the same thing happens for 2-3 times
:then you know how the Windows 7 logo is doing that ..thing..you know those 3 dots come together and then BSoD again
:goes like this for like 4-5 even 6 times and then i finnaly get to Log in Screen
:Sometimes it BSoD when the log in screen comes up
:the BSoD are most of the time :MEMORY MANAGEMENT /Driver_IRQL_Not_Less_Or_Equal

IRQL_Not_Less_Or_Equal

:or just the blue screen....

i had alot of problems with this computer, i had to change the video card, the psu and also the motherboard BUT, i had the cursed bluescreen thing for a long tine, before i needed to change those things..so..when i did all that upgrade i was like NO MORE BLUESCREEN....and guess what? the same problem? i mean the motherboard/videocard/psu works like a charm but i still get Blue screens whenever i try to start the computer, but if...lets say i stop the computer for 5 minutes then i start it back no blue screen/nada/none
:if i stop it for 30 minutes+++ BSoD all the way

The real Strange thing...i had a problem with the boot or something, so the guy who repaired it said..that he did a rescue sistem scan and some stuff that i dunno how to do...and i asked him..so the god **** BSoD stuff...IS GONEEE?

He is like...what?
I had no problem with that..
:he simply started the computer without problem except the boot thing that he fixed

He said he also tested everything there is to test..no problem what so ever

that happened today(Today i got my computer "repaired" the boot thing)...now..2 hours ago i try to start the computer..THE SAME thing happens...same thing restarts bsod yadayada and so on until i can get to the desktop


:I can play games i can listen music i can see movies...but to start the computer...? so frustrating to start it...it also can cause damage if it keeps restarting...

SO Long story short


I HAVE PROBLEMS home...i give it so someone else...NO PROBLEM WHAT SO EVER perfect computer mate !! o.O so yea...

here is the....dump stuff and info..thingy

My System SpecsSystem Spec
.

03 Feb 2012   #2

Windows 7 Home Premium 64 Bit
 
 

Where did you have it repaired? I would take it back and tell them you continue to have the same problem and ask that they start the computer up with you there so you can see how it starts for them.

Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [G:\Kingston\BSODDmpFiles\Rokiez\Windows_NT6_BSOD_jcgriff2\020312-25927-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is: 
Windows 7 Kernel Version 7600 MP (2 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16905.x86fre.win7_gdr.111025-1503
Machine Name:
Kernel base = 0x83417000 PsLoadedModuleList = 0x83556570
Debug session time: Fri Feb  3 06:30:03.486 2012 (GMT-7)
System Uptime: 0 days 0:16:00.843
Loading Kernel Symbols
...............................................................
................................................................
........................
Loading User Symbols
Loading unloaded module list
.....
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck D1, {1, 2, 0, 1}

Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+18f543 )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: 00000001, memory referenced
Arg2: 00000002, IRQL
Arg3: 00000000, value 0 = read operation, 1 = write operation
Arg4: 00000001, address which referenced memory

Debugging Details:
------------------


READ_ADDRESS: GetPointerFromAddress: unable to read from 83576700
Unable to read MiSystemVaType memory at 835560c0
 00000001 

CURRENT_IRQL:  2

FAULTING_IP: 
+5b7d952f031cddb0
00000001 ??              ???

PROCESS_NAME:  System

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

BUGCHECK_STR:  0xD1

TRAP_FRAME:  83535ab0 -- (.trap 0xffffffff83535ab0)
ErrCode = 00000000
eax=858be208 ebx=00000001 ecx=870c2760 edx=00000002 esi=858be208 edi=00000000
eip=00000001 esp=83535b24 ebp=83535b40 iopl=0         nv up ei ng nz na po nc
cs=0008  ss=0010  ds=0023  es=0023  fs=0030  gs=0000             efl=00010282
00000001 ??              ???
Resetting default scope

LAST_CONTROL_TRANSFER:  from 00000001 to 8344fb3b

FAILED_INSTRUCTION_ADDRESS: 
+5b7d952f031cddb0
00000001 ??              ???

STACK_TEXT:  
83535ab0 00000001 badb0d00 00000002 00005930 nt!KiTrap0E+0x2cf
WARNING: Frame IP not in any known module. Following frames may be wrong.
83535b20 9199e543 858be208 00000048 00000000 0x1
83535b40 91a79188 870c6760 00000048 00000000 nvlddmkm+0x18f543
83535b6c 91b0831d 870c7000 00000048 00000000 nvlddmkm+0x26a188
83535b90 9198b63e 87095008 858d4008 921e2eb8 nvlddmkm+0x2f931d
83535c34 918b0b45 86b29000 858d4008 86b29000 nvlddmkm+0x17c63e
83535c58 9182f971 8353a600 86b29074 835422c4 nvlddmkm+0xa1b45
83535c6c 9182f627 9182f93f 83535cd4 8346c755 nvlddmkm+0x20971
83535c78 8346c755 86b29074 86b29000 00000000 nvlddmkm+0x20627
83535cd4 8346c5b8 83538d20 83542240 00000000 nt!KiExecuteAllDpcs+0xf9
83535d20 8346c3d8 00000000 0000000e 00000000 nt!KiRetireDpcList+0xd5
83535d24 00000000 0000000e 00000000 00000000 nt!KiIdleLoop+0x38


STACK_COMMAND:  kb

FOLLOWUP_IP: 
nvlddmkm+18f543
9199e543 ??              ???

SYMBOL_STACK_INDEX:  2

SYMBOL_NAME:  nvlddmkm+18f543

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: nvlddmkm

IMAGE_NAME:  nvlddmkm.sys

DEBUG_FLR_IMAGE_TIMESTAMP:  4dd73a6b

FAILURE_BUCKET_ID:  0xD1_CODE_AV_BAD_IP_nvlddmkm+18f543

BUCKET_ID:  0xD1_CODE_AV_BAD_IP_nvlddmkm+18f543

Followup: MachineOwner
---------

0: kd> lmvm nvlddmkm
start    end        module name
9180f000 9223c000   nvlddmkm T (no symbols)           
    Loaded symbol image file: nvlddmkm.sys
    Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
    Image name: nvlddmkm.sys
    Timestamp:        Fri May 20 22:07:07 2011 (4DD73A6B)
    CheckSum:         00A24F19
    ImageSize:        00A2D000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
Before taking it back, try updating your graphics card driver from Graphics Driver - GeForce 285.62 Driver - GeForce first. Use the following method to update.
  1. Download the latest drivers for your display card(s)
  2. Click Start Menu
  3. Right Click My Computer/Computer
  4. Click Manage
  5. Click Device Manager from the list on the left
  6. Expand Display adapters
  7. Do the following for each adapter (in case you have multiple display cards)
    • Right click the adapter
    • Click Uninstall (do not click OK in the dialog box that pops up after hitting Uninstall)
    • Put a tick in Delete driver software for this device (if this option is available, otherwise just hit OK) and hit OK
  8. Restart your computer after uninstalling drivers for all display cards
  9. Install the latest driver for the display cards once Windows starts

Alternatively:
  1. Login as an adminstrative user
  2. Download the latest drivers for your display card(s)
  3. Click Start Menu
  4. Click Control Panel
  5. Click Hardware and Sound
  6. Click Device Manager (the last link under Devices and Printers)
  7. Expand Display adapters
  8. Do the following for each adapter (in case you have multiple display cards)
    • Right click the adapter
    • Click Uninstall (do not click OK in the dialog box that pops up after hitting Uninstall)
    • Put a tick in Delete driver software for this device (if this option is available, otherwise just hit OK) and hit OK
  9. Restart your computer after uninstalling drivers for all display cards
  10. Install the latest driver for the display cards once Windows starts

Update to Service Pack 1 (SP1)
Download Details - Microsoft Download Center - System Update Readiness Tool for Windows 7 (KB947821) [August 2011]

Download Details - Microsoft Download Center - System Update Readiness Tool for Windows 7 for x64-based Systems (KB947821) [August 2011]

Steps to follow before you install Windows 7 Service Pack 1 from the Microsoft Download Center

Service Pack 1 Download site
Links to Service Pack 1 (SP1) and preparation for SP1 courtesy of JMH
My System SpecsSystem Spec
03 Feb 2012   #3

Windows 7 Home Premium 64 Bit
 
 

Disregard that, I see you already replaced the motherboard once. When was the motherboard replaced?

Your problem is very perplexing. I may have to ask for a few sets of eyes and minds on this one to help out. Since you do have problems before Windows even starts, only other suggestion I can think of is resetting BIOS hardware and software connections and reset the CMOS.
Note: If you are using a RAID controller, this will reset the RAID and you will lose your data. Backup all important files and make a system image before proceeding with this step if you have multiple hard drives in a RAID configuration. .
  1. Go into your BIOS and load default settings to clear the CMOS memory.
  2. Save Settings and exit the BIOS.
  3. Shut down and turn off the computer.
  4. Unplug the computer from the wall or surge protector (then remove the battery if it is a laptop).
  5. Hold down the power button for 30 seconds. This closes the circuit and ensures all power from components is drained to clear the software connections between the BIOS and hardware and clear any corruption in the temporary memory.
  6. (If it is a laptop, plug the battery back into the laptop and then) Plug the computer back into the wall.
  7. Turn it on to reinitialize the software connections between the BIOS and hardware, and post back your results.
If you are unsure whether you are running a RAID configuration, do the following steps.
  1. Click Start Menu
  2. Right Click My Computer/Computer
  3. Click Manage
  4. Click Device Manager from the list on the left
  5. Expand Disk Drives and check for RAID manufacturers (use Google or ask us by typing in manufacturers listed in your Disk Drives list)

Alternatively:
  1. Login as an adminstrative user.
  2. Click Start Menu
  3. Click Control Panel
  4. Click Hardware and Sound
  5. Click Device Manager (the last link under Devices and Printers)
  6. Expand Disk Drives and check for RAID manufacturers (use Google or ask us by typing in manufacturers listed in your Disk Drives list)
My System SpecsSystem Spec
.


03 Feb 2012   #4

Windows 7 32bit Ultimate
 
 

Quote   Quote: Originally Posted by writhziden View Post
Disregard that, I see you already replaced the motherboard once. When was the motherboard replaced?

Your problem is very perplexing. I may have to ask for a few sets of eyes and minds on this one to help out. Since you do have problems before Windows even starts, only other suggestion I can think of is resetting BIOS hardware and software connections and reset the CMOS.
Note: If you are using a RAID controller, this will reset the RAID and you will lose your data. Backup all important files and make a system image before proceeding with this step if you have multiple hard drives in a RAID configuration. .
  1. Go into your BIOS and load default settings to clear the CMOS memory.
  2. Save Settings and exit the BIOS.
  3. Shut down and turn off the computer.
  4. Unplug the computer from the wall or surge protector (then remove the battery if it is a laptop).
  5. Hold down the power button for 30 seconds. This closes the circuit and ensures all power from components is drained to clear the software connections between the BIOS and hardware and clear any corruption in the temporary memory.
  6. (If it is a laptop, plug the battery back into the laptop and then) Plug the computer back into the wall.
  7. Turn it on to reinitialize the software connections between the BIOS and hardware, and post back your results.
If you are unsure whether you are running a RAID configuration, do the following steps.
  1. Click Start Menu
  2. Right Click My Computer/Computer
  3. Click Manage
  4. Click Device Manager from the list on the left
  5. Expand Disk Drives and check for RAID manufacturers (use Google or ask us by typing in manufacturers listed in your Disk Drives list)

Alternatively:
  1. Login as an adminstrative user.
  2. Click Start Menu
  3. Click Control Panel
  4. Click Hardware and Sound
  5. Click Device Manager (the last link under Devices and Printers)
  6. Expand Disk Drives and check for RAID manufacturers (use Google or ask us by typing in manufacturers listed in your Disk Drives list)
I replaced it 1 month ago i think,and yea i had this problem Before

I did the Nvidia thing,however to see if it worked i have to shut down the computer.

I will also do what you said now,seems complicated but it shouldn't be a problem,gonna check for raid,and by data you mean i am going to lose the windows to? i will need to reinstall the windows?

:Installed Windows pack thing sp1 from the update
My System SpecsSystem Spec
03 Feb 2012   #5

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

This appears to be the dreaded 'Cold Boot' problem.
Very hard to diagnose, usual suspects are RAM, motherboard, PSU, CPU.
Since you have replaced the motherboard/GPU/PSU, we will not rule them out but, take a look at the RAM first as it seems to be the culprit most often.

Can you download CPUZ and post a snip of the CPU, Mainboard, Memory, and SPD tabs.
For posting the information , enter 'Snipping tool' in the Start button > Search box, hit enter. Select the area you want to post and save to a convenient place.
How to Post a Screenshot in Seven Forums

Have you been checking your temperatures?
Use Real Temp , to check the CPU temps when at idle, under load and/or testing.
Let us know the minimum and maximum temps you get.

Go to your BIOS and tell us what the CPU, RAM and the NB (North Bridge) voltages are.
This is important in order to make RAM settings adjustments.
My System SpecsSystem Spec
03 Feb 2012   #6

Windows 7 32bit Ultimate
 
 

Quote   Quote: Originally Posted by Dave76 View Post
This appears to be the dreaded 'Cold Boot' problem.
Very hard to diagnose, usual suspects are RAM, motherboard, PSU, CPU.
Since you have replaced the motherboard/GPU/PSU, we will not rule them out but, take a look at the RAM first as it seems to be the culprit most often.

Can you download CPUZ and post a snip of the CPU, Mainboard, Memory, and SPD tabs.
For posting the information , enter 'Snipping tool' in the Start button > Search box, hit enter. Select the area you want to post and save to a convenient place.
How to Post a Screenshot in Seven Forums

Have you been checking your temperatures?
Use Real Temp , to check the CPU temps when at idle, under load and/or testing.
Let us know the minimum and maximum temps you get.

Go to your BIOS and tell us what the CPU, RAM and the NB (North Bridge) voltages are.
This is important in order to make RAM settings adjustments.

Pics:

:::

I will also add the Voltages in 1-2 min tops


I think those are wrong but here we go:

VCORE VOLTAGE [1.360v]

3.3V VOLTAGE [ 3.344v]

5V VOLTAGE [ 5.208v]

12V VOLTAGE [12.196v]
My System SpecsSystem Spec
04 Feb 2012   #7

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

First, update your graphics card drivers and follow the other steps given by writhziden, including installing SP1.


The information looks ok, will do more investigating.

The CPU voltage is good, need to get the DRAM voltage and the NB (North Bridge) voltage from your BIOS.
Post them in your next reply.

EDIT:Just checked your installed drivers and most of them are good.
Just keep the information below in mind for any issues in the future, For Your Information only.

Just found some bad news, your motherboard is not certified for Windows 7.
It doesn't mean it can't run Windows 7, just that Asus doesn't have Windows 7 drivers for it. Which will likely cause a lot of driver issues.

What drivers did you use when you installed Windows 7?
Hopefully Windows 7 installed the appropriate drivers when you installed it.

The bad news is Asus is not very good at keeping drivers updated.

You can try the suggestions posted at this thread.
Help with asus drivers please
Quote   Quote: Originally Posted by pebbly View Post
hi saakeman, welcome to the forums, Asus does not support your mobo for Windows 7, but all is not lost download the drivers you require ASUSTeK Computer Inc.-Support- and install them in compatibility mode Compatibility Mode hope that helps you
Your Asus P5VD2-VM SE support site.
My System SpecsSystem Spec
Reply

 It makes no sense to me




Thread Tools



Similar help and support threads for2: It makes no sense to me
Thread Forum
7950 Crossfire Enabled but not (if that makes sense) Graphic Cards
Norton Subscription Fees makes no sense. System Security
Upgrading to Gbit LAN - any sense in that? Network & Sharing
some of these makes sense !! ^_^ Chillout Room
Can someone help make sense of this BSOD Help and Support
Does this make any sense?? Gaming

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 12:33 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33