Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD all from same crash address ntoskrnl.exe+7cc40.. please help!!

07 Feb 2012   #31
jamie7755

Windows 7 Ultimate 64bit
 
 

Using that hcidesign is quicker than running memtest86?

Iv not had a blue error screen for 3 hours I started the test got 6 error the got a bsod


My System SpecsSystem Spec
.

07 Feb 2012   #32
jamie7755

Windows 7 Ultimate 64bit
 
 

Well I just tired to boot on the 2gb ram and it wouldn't load on windows start up moved it to the other slot and same thing so don't think it's the slot I just also tried the other 2gb that I have taken out and replaced with a tempory 512 like I mention in a pervious post.. That didn't load past the windows loading screen either and on the first try in one slot it got a bsod.. I tried the 512 on its own in both slots and it loads fine

It seems to be better without the netgear device in maybe because the ram is bad it's not liking the info from the netgear device could that be possible?
My System SpecsSystem Spec
07 Feb 2012   #33
jamie7755

Windows 7 Ultimate 64bit
 
 

Well I just tired to boot on the 2gb ram and it wouldn't load on windows start up moved it to the other slot and same thing so don't think it's the slot I just also tried the other 2gb that I have taken out and replaced with a tempory 512 like I mention in a pervious post.. That didn't load past the windows loading screen either and on the first try in one slot it got a bsod.. I tried the 512 on its own in both slots and it loads fine

It seems to be better without the netgear device in maybe because the ram is bad it's not liking the info from the netgear device could that be possible?
My System SpecsSystem Spec
.


08 Feb 2012   #34
usasma
Microsoft MVP

 
 

Test each stick with MemTest. If it has an error, it's most likely bad.
If all sticks have errors, test them in another slot.
If any sticks are good, test the good one in all the slots.

If all sticks test bad in all slots, then it's uncertain if the problem is in the RAM or the slots (or maybe in other components).

If that's the case, try running Prime95.
Make it run each test (Blend, Small FFT's, and Large FFT's)
Time how long it takes it to make errors (if it crashes, that counts as an error)
Let us know the results - that'll tell us roughly where the memory error is coming from.
My System SpecsSystem Spec
08 Feb 2012   #35
jamie7755

Windows 7 Ultimate 64bit
 
 

Iv got two 512s in the pc now not had any problems yet i think both the 2gb rams mite of got faulty when my old motherboard packed in maybe it efforted the ram... Like I said I replaced the motherboard like for like

Anything thing why does the new 2gb I brought not work with the 512?? the old 2gb worked with it apart from the obv bsod
My System SpecsSystem Spec
08 Feb 2012   #36
usasma
Microsoft MVP

 
 

I've no clue - but if the stick is bad, it's gonna be bad no matter what you test it with.
My System SpecsSystem Spec
Reply

 BSOD all from same crash address ntoskrnl.exe+7cc40.. please help!!




Thread Tools





Similar help and support threads
Thread Forum
BSOD ntoskrnl.exe , All the Time !! Crash Address ntoskrnl.exe+80640
Jan 2014 //------------------------------------------- How to Solve : 1- I've uninstalled my windows and recover my laptop with recovery DVD to it's original factory state.(original windows :)) 2- Never installed Norton internet security again , I'm using Microsoft Security Essentials now. 3-...
BSOD Help and Support
BSOD upon login Crash Address : ntoskrnl.exe+70040
BSOD upon logging in my computer. Works fine in safe mode. Any help much appreciated thanks.
BSOD Help and Support
BSOD very random - All tied to ntoskrnl.exe as crash address
My custom made PC has been plagued with very random BSODs for over a week now but all crashes logged show the crash address as ntoskrnl.exe. For nearly all the crashes (except this very latest one while I was setting up my account here and files to share with you) happened while running a game, 1...
BSOD Help and Support
BSOD; Crash Address: ntoskrnl.exe+71f00
Totally fed up with my PC now, been living with blue screens for over a year! Up until today they have pretty much only occurred after several minutes of having booted from an unplugged state, i.e. disconnected from the mains, However today I've rebuilt my system on a Crucial 128GB M4 and have had...
BSOD Help and Support
BSOD random error 0x00000124, hal.dll at address ntoskrnl.exe+7cc40
I keep getting a random BSOD, I get it a lot in Lightroom 3 but have gotten the same error doing nothing. *** STOP: 0x00000124 (0x0000000000000000, 0xfffffa80053d5028, 0x00000000b2000040, 0x0000000000000800) *** hal.dll - Address 0xfffff80002c15a3b base at 0xfffff80002c03000 DateStamp ...
BSOD Help and Support
BSOD ntoskrnl.exe+26ee0 ntoskrnl.exe+7cc40
Hi, I've been having this BSOD appear very randomly. IRQL_NOT_LESS_OR_EQUAL 0x0000000a (all reports in .rar file) Sometimes within 1 hour, other times as long as 24hrs+. I've got my BIOS/Drivers up to date for my CPU, Graphics Card, and Motherboard. I've rigorously tested my memory and have...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 23:02.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App