Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Win7 x64 Random BSOD's, different bugcheck codes

11 Feb 2012   #11
aSmith

Windows 7 x64
 
 

As i wrote: i did reinstall windows. The graphics card is new, and connected to 2x6pin cable.
PSU worked fine before and i have no replacement to the VGA so i cant just take it out to test it.
Also: culd u explain to me how u came to this conclusion?

update:
another crash, screen showed random trash and everything froze off... no dump was made.


My System SpecsSystem Spec
.
11 Feb 2012   #12
themaniacboy

Windows 7 Ultimate x86
 
 

Did you also check the compatibility of your motherboard for your graphics card and cpu ?
My System SpecsSystem Spec
12 Feb 2012   #13
aSmith

Windows 7 x64
 
 
new dump with realtek driver involvement

The config is fine. (detailed in 1st post!)

I have another crash dump (attached) with similar stack to the previous dump.
Verifier still running on all non microsot drivers, even though no sign of that is to be found in the dump.
The last crash blamed afd.sys while this one has tcpip.sys as the probable cause; both windows components from what i understand and both related to networking.
The other thing that looks suspicious is the Realtek LAN driver involvement in both stacks. (Rt64win7)
Culd this be it? Shuld i revert to default windows drivers for the network card?
Please take a look at the last 2 dumps. Thx.
My System SpecsSystem Spec
.

12 Feb 2012   #14
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by aSmith View Post
The config is fine. (detailed in 1st post!)

I have another crash dump (attached) with similar stack to the previous dump.
Verifier still running on all non microsot drivers, even though no sign of that is to be found in the dump.
The last crash blamed afd.sys while this one has tcpip.sys as the probable cause; both windows components from what i understand and both related to networking.
The other thing that looks suspicious is the Realtek LAN driver involvement in both stacks. (Rt64win7)
Culd this be it? Shuld i revert to default windows drivers for the network card?
Please take a look at the last 2 dumps. Thx.

Memory corruption probably Related to Rt64win7.sys 8101E/8168/8169 NDIS 6.20 64-bit Driver from Realtek Corporation



These crashes were caused by memory corruption/exception (probably a driver).
Please run these two tests to verify your memory and find which driver is causing the problem.


* If you are overclocking anything reset to default before running these tests.
In other words STOP!!!

* If you have raid update its Driver.




Memtest.
Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.

RAM - Test with Memtest86+



Driver verifier

Quote:
Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

So, I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Special Pool", "Force Pending I/O Requests" and "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen.
Continue to use your system normally, and if you know what causes the crash, do that repeatedly.
The objective here is to get the system to crash because Driver Verifier is stressing the drivers out.
If it doesn't crash for you, then let it run for at least 36 hours of continuous operation.

Reboot into Windows (after the crash) and turn off Driver Verifier by going back in and selecting "Delete existing settings" on the first page, then locate and zip up the memory dump file and upload it with your next post.

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.
My System SpecsSystem Spec
12 Feb 2012   #15
aSmith

Windows 7 x64
 
 

I did run memtest and had no errors, nothing is overclocked and verifier is running!

Didnt remove the realtek driver yet, but had another crash that did not involve it.
Any suggestions?

UPDATE:
I found a newer version of the realtek driver and installed it, but the system is still crashing.
(latest crashdump attached)
SPECIAL_POOL_DETECTED_MEMORY_CORRUPTION

UPDATE 2:
3rd crashdump file attached
My System SpecsSystem Spec
12 Feb 2012   #16
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by aSmith View Post
I did run memtest and had no errors, nothing is overclocked and verifier is running!

Didnt remove the realtek driver yet, but had another crash that did not involve it.
Any suggestions?

UPDATE:
I found a newer version of the realtek driver and installed it, but the system is still crashing.
(latest crashdump attached)
SPECIAL_POOL_DETECTED_MEMORY_CORRUPTION

UPDATE 2:
3rd crashdump file attached

Still memory corruption as you saw and not driver verified.
My System SpecsSystem Spec
12 Feb 2012   #17
aSmith

Windows 7 x64
 
 

So is it a driver that is not verified right now, or is driver verifier not working correctly?
What shuld i do? If it's a 3rd party driver, i can try a clean install...
My System SpecsSystem Spec
12 Feb 2012   #18
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by aSmith View Post
So is it a driver that is not verified right now, or is driver verifier not working correctly?
What shuld i do? If it's a 3rd party driver, i can try a clean install...

What drivers are you currently verifying? You can check by running verifier /query
My System SpecsSystem Spec
13 Feb 2012   #19
aSmith

Windows 7 x64
 
 

Code:
Verified drivers:
Name: amdxata.sys, loads: 1, unloads: 0
Name: serial.sys, loads: 1, unloads: 0
Name: atikmpag.sys, loads: 1, unloads: 0
Name: atikmdag.sys, loads: 1, unloads: 0
Name: rt64win7.sys, loads: 1, unloads: 0
Name: ndis.sys, loads: 1, unloads: 0
Name: wmbenum.sys, loads: 1, unloads: 0
Name: wmxlcore.sys, loads: 1, unloads: 0
Name: rthdmivx.sys, loads: 1, unloads: 0
Name: rtkvhd64.sys, loads: 1, unloads: 0
Name: dump_dumpata.sys, loads: 0, unloads: 0
Name: dump_atapi.sys, loads: 2, unloads: 1
Name: dump_dumpfve.sys, loads: 2, unloads: 1
Name: wmfilter.sys, loads: 1, unloads: 0
Name: lhidfilt.sys, loads: 1, unloads: 0
Name: lmoufilt.sys, loads: 1, unloads: 0
Name: secdrv.sys, loads: 1, unloads: 0
The remaining drivers are all from microsoft.
My System SpecsSystem Spec
13 Feb 2012   #20
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by aSmith View Post
Code:
Verified drivers:
Name: amdxata.sys, loads: 1, unloads: 0
Name: serial.sys, loads: 1, unloads: 0
Name: atikmpag.sys, loads: 1, unloads: 0
Name: atikmdag.sys, loads: 1, unloads: 0
Name: rt64win7.sys, loads: 1, unloads: 0
Name: ndis.sys, loads: 1, unloads: 0
Name: wmbenum.sys, loads: 1, unloads: 0
Name: wmxlcore.sys, loads: 1, unloads: 0
Name: rthdmivx.sys, loads: 1, unloads: 0
Name: rtkvhd64.sys, loads: 1, unloads: 0
Name: dump_dumpata.sys, loads: 0, unloads: 0
Name: dump_atapi.sys, loads: 2, unloads: 1
Name: dump_dumpfve.sys, loads: 2, unloads: 1
Name: wmfilter.sys, loads: 1, unloads: 0
Name: lhidfilt.sys, loads: 1, unloads: 0
Name: lmoufilt.sys, loads: 1, unloads: 0
Name: secdrv.sys, loads: 1, unloads: 0
The remaining drivers are all from microsoft.
Newest crash is inconclusive. So we wait.
My System SpecsSystem Spec
Reply

 Win7 x64 Random BSOD's, different bugcheck codes




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Random BSOD Bugcheck 24
Hello. I build a custom PC a month ago. From the beggining I recieve random BSOD with 5-6 codes. Windows 7 Ultimate 64bit SP1 Intel Core i5-4440 Asus H81M-K 4GB DDR3 1600MHz Toshiba 500GB 7200/32MB Fortron 450W
BSOD Help and Support
Random BSOD, bugcheck.
My new(Built in November) computer has had issues with stability since the first week it was built. At first the offending application was the mom.exe Catalyst Control Center monitoring app, but it has since been removed and I am still getting blue screens. I have attached a zip file that I...
BSOD Help and Support
BSOD Win XP 64 Bit Random Crashing "Multi Bugcheck Codes"
Hi, This is my first post in this forum, actually i found that this is the most helpful forum all over the net, Anyway I need a little help solving this BSOD issue please, My PC is crashing randomly when I'm away and getting BSOD, with the following errors, I tried to run "Disk...
BSOD Help and Support
BSOD Win7 x64 BugCheck 9F
Hi, first time post. I hope to get help with a reoccurring crash. Here are my basic PC stats: * Windows 7 Professional x64 * Original OS was Windows 7 Home Premium x64, has been upgraded with Windows Anytime Upgrade * The original OS was OEM * Hardware is about 1 year old * OS is about 1...
BSOD Help and Support
BSOD Bugcheck 0x116 Win7 x64 DV6 2090eo random BSOD's
Hello! I'm getting random BSOD's on my HP DV6-2090eo Laptop. At most times there is no "real" bluescreen appearing. Instead the computer just freeze and then go black, and I've to shut it down manually. But sometimes there is a real bluescreen appearing and it says "an attempt to reset the...
BSOD Help and Support
BSOD- bugcheck Win7/64
Bugcheck - BSOD Asus P5Be E6600 cpu 2x1 GB Corsair twin2x PC2-6400C4 2x2 GB Adata DQVE1B16 PC2-6400 5-5-5-18 FSB266 DDR2-800 voltages set to auto PCI Express freq locked at 100
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:38.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App