Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD Randomly/Mainly during Video playback

16 Feb 2012   #11
Boudi

windows 7 ultimate x64
 
 

Latest Crash dump, Happened again while doing the usual multitasking, playing movie, file transfer Internet explorer. Although I must admit if I try to force a crash it's becoming alot more difficult..


EDIT
I just tried forcing a crash while doing all of the above in safe mode and it wouldnt crash no matter what I tried.


My System SpecsSystem Spec
.
16 Feb 2012   #12
writhziden

Windows 7 Home Premium 64 Bit
 
 

Quote   Quote: Originally Posted by Boudi View Post
Ran the windows memory diagnostics tool over night 2 passes extended with the following results:

"The Windows Memory Diagnostic tested the computer's memory and detected no errors"

I also ran MEMTEST86+ over 7 passes with positive results and no errors found.


And finally ran the disk check again and got a Windows has checked the file system and found no problems message.

... One qusetion about the FURMAR test, I cant seem to find the VGA test you mentioned, the Graphic card and GPU test or the OpenGL bench mark and GPU tempreture test are they all bundled in the same program or5 are they all seperate downloads?

Thanks Writhziden.
Furmark is more to test what temperatures you get when stressing the GPU.
Quote:
FurMark Setup:
- If you have more than one GPU, select Multi-GPU during setup
- In the Run mode box, select "Stability Test" and "Log GPU Temperature"
Click "Go" to start the test
- Run the test until the GPU temperature maxes out - or until you start having problems (whichever comes first).
- Click "Quit" to exit
The quote is from usasma in post #2 of STOP 0x116: VIDEO_TDR_ERROR troubleshooting for the best steps to determine the GPU temperatures during stress.


Quote   Quote: Originally Posted by Boudi View Post
I'm really starting to think I have installed a wire or component or something in the wrong place when I built this rig, this was my first build from the ground up, I can take a few pics to show where everything has been installed etc if that would help. come to think about it, while I was putting it all together one of my hard disks (C drive) had a bit of a bump, nothing too major though.

could the version of windows itself be the problem here?

Had another two crashes over the last two days , One chrah occured while I was running the SFC /SCANNOW Command - System File Checker in dos and the other while playing a movie. I notice that the chances of getting a BSOD are somewhat increased if I am multitasking, namely tranferring files to an external HDD, palying a movie and have internet explorer open.

I'm just trying to narrow it down but going over what I have just read I think I've widened the error scale.

Never the less, I will run the rest of the prescibed tests tonight and post the result.
There are a number of possible causes for crashes, so I cannot state any conclusions to your post. If you built the machine yourself, possible build errors do include incorrectly connecting components.

They also include electrostatic discharge (ESD) into components. Avoid Static Damage to Your PC | PCWorld may be interesting further reading. To sum up the article, you do not have to feel the ESD for it to damage components. We feel ESD at ~1400-4000 Volts (that link says 3500-4000 Volts, but it varies based on the climate and how dry it is). When components receive a shock that we cannot feel, they can work for a time and failure symptoms will show up later, leading to the user wondering why the system is suddenly failing.

Another possible custom-built problem we see on these forums is failure of low-grade power supply units to meet the requirements needed by components in the system.

You mention the Windows version as another source. What do you mean by this? Where did you obtain your version of Windows?


Quote   Quote: Originally Posted by Boudi View Post
Latest Crash dump, Happened again while doing the usual multitasking, playing movie, file transfer Internet explorer. Although I must admit if I try to force a crash it's becoming alot more difficult..


EDIT
I just tried forcing a crash while doing all of the above in safe mode and it wouldnt crash no matter what I tried.
What were the results of the sfc /scannow?

Code:
  1. Loading Dump File [F:\BSODDmpFiles\Boudi\Windows_NT6_BSOD_jcgriff2\021612-15210-01.dmp] Mini Kernel Dump File: Only registers and stack trace are available Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols Executable search path is: Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64 Product: WinNt, suite: TerminalServer SingleUserTS Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506 Machine Name: Kernel base = 0xfffff800`0300a000 PsLoadedModuleList = 0xfffff800`0324f670 Debug session time: Thu Feb 16 05:02:38.321 2012 (GMT-7) System Uptime: 0 days 2:24:09.258 Loading Kernel Symbols ............................................................... ................................................................ ........................ Loading User Symbols Loading unloaded module list ...... ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* Use !analyze -v to get detailed debugging information. BugCheck 24, {1904fb, fffff88002868318, fffff88002867b70, fffff88001027aa8} Unable to load image \SystemRoot\system32\DRIVERS\bdfsfltr.sys, Win32 error 0n2 *** WARNING: Unable to verify timestamp for bdfsfltr.sys *** ERROR: Module load completed but symbols could not be loaded for bdfsfltr.sys Probably caused by : bdfsfltr.sys ( bdfsfltr+13da3 ) Followup: MachineOwner --------- 4: kd> !analyze -v ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* NTFS_FILE_SYSTEM (24) If you see NtfsExceptionFilter on the stack then the 2nd and 3rd parameters are the exception record and context record. Do a .cxr on the 3rd parameter and then kb to obtain a more informative stack trace. Arguments: Arg1: 00000000001904fb Arg2: fffff88002868318 Arg3: fffff88002867b70 Arg4: fffff88001027aa8 Debugging Details: ------------------ EXCEPTION_RECORD: fffff88002868318 -- (.exr 0xfffff88002868318) ExceptionAddress: fffff88001027aa8 (fltmgr!FltpGetStreamListCtrl+0x0000000000000088) ExceptionCode: c0000005 (Access violation) ExceptionFlags: 00000000 NumberParameters: 2 Parameter[0]: 0000000000000000 Parameter[1]: ffffffffffffffff Attempt to read from address ffffffffffffffff CONTEXT: fffff88002867b70 -- (.cxr 0xfffff88002867b70) rax=fffff8a003bc6ca8 rbx=fffffa800700e320 rcx=fffff8a003bc6c70 rdx=fffffa80093ab010 rsi=fffffa80093ab010 rdi=fffff880028685e0 rip=fffff88001027aa8 rsp=fffff88002868550 rbp=fffffa8009782290 r8=0000000000000000 r9=fffff880028685e0 r10=0000000000000000 r11=0000000000000011 r12=0000000000000000 r13=fffff880028686b8 r14=0000000000000000 r15=fffff880028688b0 iopl=0 nv up ei pl zr na po nc cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010246 fltmgr!FltpGetStreamListCtrl+0x88: fffff880`01027aa8 ff1542e80000 call qword ptr [fltmgr!_imp_FsRtlLookupPerStreamContextInternal (fffff880`010362f0)] ds:002b:fffff880`010362f0=000000000004729c Resetting default scope CUSTOMER_CRASH_COUNT: 1 DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT PROCESS_NAME: explorer.exe CURRENT_IRQL: 0 ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s. EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s. EXCEPTION_PARAMETER1: 0000000000000000 EXCEPTION_PARAMETER2: ffffffffffffffff READ_ADDRESS: GetPointerFromAddress: unable to read from fffff800032b9100 ffffffffffffffff FOLLOWUP_IP: bdfsfltr+13da3 fffff880`01144da3 ?? ??? FAULTING_IP: fltmgr!FltpGetStreamListCtrl+88 fffff880`01027aa8 ff1542e80000 call qword ptr [fltmgr!_imp_FsRtlLookupPerStreamContextInternal (fffff880`010362f0)] BUGCHECK_STR: 0x24 LAST_CONTROL_TRANSFER: from fffff88001032da1 to fffff88001027aa8 STACK_TEXT: fffff880`02868550 fffff880`01032da1 : fffffa80`093ab010 fffff800`030b25db 00000000`00000000 00000000`00000004 : fltmgr!FltpGetStreamListCtrl+0x88 fffff880`028685b0 fffff880`01144da3 : 00000000`00000000 00000000`00000000 fffff880`028686d0 fffff880`0102e013 : fltmgr!FltGetStreamContext+0x21 fffff880`028685e0 00000000`00000000 : 00000000`00000000 fffff880`028686d0 fffff880`0102e013 fffffa80`07b93338 : bdfsfltr+0x13da3 SYMBOL_STACK_INDEX: 2 SYMBOL_NAME: bdfsfltr+13da3 FOLLOWUP_NAME: MachineOwner MODULE_NAME: bdfsfltr IMAGE_NAME: bdfsfltr.sys DEBUG_FLR_IMAGE_TIMESTAMP: 4e302d69 STACK_COMMAND: .cxr 0xfffff88002867b70 ; kb FAILURE_BUCKET_ID: X64_0x24_bdfsfltr+13da3 BUCKET_ID: X64_0x24_bdfsfltr+13da3 Followup: MachineOwner ---------
  2. Loading Dump File [F:\BSODDmpFiles\Boudi\Windows_NT6_BSOD_jcgriff2\021512-19796-01.dmp] Mini Kernel Dump File: Only registers and stack trace are available Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols Executable search path is: Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64 Product: WinNt, suite: TerminalServer SingleUserTS Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506 Machine Name: Kernel base = 0xfffff800`0304e000 PsLoadedModuleList = 0xfffff800`03293670 Debug session time: Tue Feb 14 13:44:40.231 2012 (GMT-7) System Uptime: 0 days 0:13:12.041 Loading Kernel Symbols ............................................................... ................................................................ ........................ Loading User Symbols Loading unloaded module list ...... ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* Use !analyze -v to get detailed debugging information. BugCheck 50, {fffff88008bf53fd, 1, fffff800033e42ce, 0} Could not read faulting driver name Probably caused by : memory_corruption ( nt!MiMapViewOfSection+1ae ) Followup: MachineOwner --------- 3: kd> !analyze -v ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* PAGE_FAULT_IN_NONPAGED_AREA (50) Invalid system memory was referenced. This cannot be protected by try-except, it must be protected by a Probe. Typically the address is just plain bad or it is pointing at freed memory. Arguments: Arg1: fffff88008bf53fd, memory referenced. Arg2: 0000000000000001, value 0 = read operation, 1 = write operation. Arg3: fffff800033e42ce, If non-zero, the instruction address which referenced the bad memory address. Arg4: 0000000000000000, (reserved) Debugging Details: ------------------ Could not read faulting driver name WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff800032fd100 fffff88008bf53fd FAULTING_IP: nt!MiMapViewOfSection+1ae fffff800`033e42ce 488b842408010000 mov rax,qword ptr [rsp+108h] MM_INTERNAL_CODE: 0 CUSTOMER_CRASH_COUNT: 1 DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT BUGCHECK_STR: 0x50 PROCESS_NAME: TrustedInstall CURRENT_IRQL: 0 TRAP_FRAME: fffff88008bfd720 -- (.trap 0xfffff88008bfd720) NOTE: The trap frame does not contain all registers. Some register values may be zeroed or incorrect. rax=0000000000002000 rbx=0000000000000000 rcx=0000000000000004 rdx=fffff8000304e000 rsi=0000000000000000 rdi=0000000000000000 rip=fffff800033e42ce rsp=fffff88008bfd8b0 rbp=fffffa800ab27278 r8=0000000000001000 r9=fffff88008bfda10 r10=0000000000000004 r11=fffffa800ab27060 r12=0000000000000000 r13=0000000000000000 r14=0000000000000000 r15=0000000000000000 iopl=0 nv up ei pl zr na po nc nt!MiMapViewOfSection+0x1ae: fffff800`033e42ce 488b842408010000 mov rax,qword ptr [rsp+108h] ss:0018:fffff880`08bfd9b8=0000000000000000 Resetting default scope LAST_CONTROL_TRANSFER: from fffff800030769fc to fffff800030cac40 STACK_TEXT: fffff880`08bfd5b8 fffff800`030769fc : 00000000`00000050 fffff880`08bf53fd 00000000`00000001 fffff880`08bfd720 : nt!KeBugCheckEx fffff880`08bfd5c0 fffff800`030c8d6e : 00000000`00000001 fffff880`08bf53fd 00000002`0d25f000 fffffa80`071d8550 : nt! ?? ::FNODOBFM::`string'+0x4611f fffff880`08bfd720 fffff800`033e42ce : 00000000`00000001 00000000`00000000 00000000`00000000 fffff880`00961000 : nt!KiPageFault+0x16e fffff880`08bfd8b0 fffff800`033e478e : ffffdbc2`00000004 fffffa80`0ab27060 fffff880`08bfda10 00000000`00000000 : nt!MiMapViewOfSection+0x1ae fffff880`08bfd9a0 fffff800`030c9ed3 : 00000000`000007e4 fffffa80`071d8550 00000000`00b1c008 00000000`00000001 : nt!NtMapViewOfSection+0x2bd fffff880`08bfda70 00000000`74571b42 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13 00000000`00b1bfe8 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x74571b42 STACK_COMMAND: kb FOLLOWUP_IP: nt!MiMapViewOfSection+1ae fffff800`033e42ce 488b842408010000 mov rax,qword ptr [rsp+108h] SYMBOL_STACK_INDEX: 3 SYMBOL_NAME: nt!MiMapViewOfSection+1ae FOLLOWUP_NAME: MachineOwner MODULE_NAME: nt DEBUG_FLR_IMAGE_TIMESTAMP: 4e02aaa3 IMAGE_NAME: memory_corruption FAILURE_BUCKET_ID: X64_0x50_nt!MiMapViewOfSection+1ae BUCKET_ID: X64_0x50_nt!MiMapViewOfSection+1ae Followup: MachineOwner ---------
  3. Loading Dump File [F:\BSODDmpFiles\Boudi\Windows_NT6_BSOD_jcgriff2\021212-26161-01.dmp] Mini Kernel Dump File: Only registers and stack trace are available Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols Executable search path is: Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64 Product: WinNt, suite: TerminalServer SingleUserTS Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506 Machine Name: Kernel base = 0xfffff800`02c12000 PsLoadedModuleList = 0xfffff800`02e57670 Debug session time: Sat Feb 11 08:45:21.799 2012 (GMT-7) System Uptime: 0 days 3:01:38.721 Loading Kernel Symbols ............................................................... ................................................................ ............. Loading User Symbols Loading unloaded module list ...... ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* Use !analyze -v to get detailed debugging information. BugCheck 1E, {0, 0, 0, 0} Probably caused by : tcpip.sys ( tcpip!TcpTryToContinueRcvWndTuning+9b ) Followup: MachineOwner --------- 0: kd> !analyze -v ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* KMODE_EXCEPTION_NOT_HANDLED (1e) This is a very common bugcheck. Usually the exception address pinpoints the driver/function that caused the problem. Always note this address as well as the link date of the driver/image that contains this address. Arguments: Arg1: 0000000000000000, The exception code that was not handled Arg2: 0000000000000000, The address that the exception occurred at Arg3: 0000000000000000, Parameter 0 of the exception Arg4: 0000000000000000, Parameter 1 of the exception Debugging Details: ------------------ EXCEPTION_CODE: (Win32) 0 (0) - The operation completed successfully. FAULTING_IP: +6aa0952f02cfd8d4 00000000`00000000 ?? ??? EXCEPTION_PARAMETER1: 0000000000000000 EXCEPTION_PARAMETER2: 0000000000000000 CUSTOMER_CRASH_COUNT: 1 DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT BUGCHECK_STR: 0x1E PROCESS_NAME: System CURRENT_IRQL: 2 EXCEPTION_RECORD: fffff80000b9c088 -- (.exr 0xfffff80000b9c088) ExceptionAddress: fffff880016ea77b (tcpip!TcpTryToContinueRcvWndTuning+0x000000000000009b) ExceptionCode: c0000005 (Access violation) ExceptionFlags: 00000000 NumberParameters: 2 Parameter[0]: 0000000000000000 Parameter[1]: ffffffffffffffff Attempt to read from address ffffffffffffffff TRAP_FRAME: fffff80000b9c130 -- (.trap 0xfffff80000b9c130) NOTE: The trap frame does not contain all registers. Some register values may be zeroed or incorrect. rax=0000000000000001 rbx=0000000000000000 rcx=fffff880017ff150 rdx=0000000000000000 rsi=0000000000000000 rdi=0000000000000000 rip=fffff880016ea77b rsp=fffff80000b9c2c0 rbp=0000000000000002 r8=fffff80000b9c3b8 r9=00000000000000fa r10=fffff80002e04e80 r11=0000000000000004 r12=0000000000000000 r13=0000000000000000 r14=0000000000000000 r15=0000000000000000 iopl=0 nv up ei ng nz na pe nc tcpip!TcpTryToContinueRcvWndTuning+0x9b: fffff880`016ea77b f083471001 lock add dword ptr [rdi+10h],1 ds:0055:00000000`00000010=???????? Resetting default scope LAST_CONTROL_TRANSFER: from fffff80002c865fe to fffff80002c8ec10 STACK_TEXT: fffff800`00b9b168 fffff800`02c865fe : fffff880`018183ac fffff880`016e9cf2 fffff880`017c4d88 fffff800`00b9c088 : nt!KeBugCheck fffff800`00b9b170 fffff800`02cba4fd : fffff800`02e9871c fffff800`02dd5c30 fffff800`02c12000 fffff800`00b9c088 : nt!KiKernelCalloutExceptionHandler+0xe fffff800`00b9b1a0 fffff800`02cb92d5 : fffff800`02dd90fc fffff800`00b9b218 fffff800`00b9c088 fffff800`02c12000 : nt!RtlpExecuteHandlerForException+0xd fffff800`00b9b1d0 fffff800`02cca361 : fffff800`00b9c088 fffff800`00b9b8e0 fffff800`00000000 fffbfa80`07c1d880 : nt!RtlDispatchException+0x415 fffff800`00b9b8b0 fffff800`02c8e2c2 : fffff800`00b9c088 00000000`00000000 fffff800`00b9c130 fffffa80`07bffde0 : nt!KiDispatchException+0x135 fffff800`00b9bf50 fffff800`02c8cbca : 0000057f`f78227e8 0000057f`f69092d8 fffff800`00b9c100 fffffa80`087ddb80 : nt!KiExceptionDispatch+0xc2 fffff800`00b9c130 fffff880`016ea77b : fffffa80`07be9d40 00000000`00000000 00000000`00000000 fffffa80`07be9d40 : nt!KiGeneralProtectionFault+0x10a fffff800`00b9c2c0 fffff880`016ea123 : fffffa80`07be9d40 00000000`00000000 fffffa80`07d28010 fffffa80`07d28010 : tcpip!TcpTryToContinueRcvWndTuning+0x9b fffff800`00b9c330 fffff800`02c9a5fc : fffff800`02e04e80 00000000`00000000 fffff800`00b9c4c0 00000000`00000000 : tcpip!TcpPeriodicTimeoutHandler+0xb22 fffff800`00b9c430 fffff800`02c9a496 : fffffa80`07d280e0 00000000`000aa907 00000000`00000000 00000001`01010100 : nt!KiProcessTimerDpcTable+0x6c fffff800`00b9c4a0 fffff800`02c9a37e : 00000019`6024e3c5 fffff800`00b9cb18 00000000`000aa907 fffff800`02e07368 : nt!KiProcessExpiredTimerList+0xc6 fffff800`00b9caf0 fffff800`02c9a167 : 00000008`7418bec1 00000008`000aa907 00000008`7418be98 00000000`00000007 : nt!KiTimerExpiration+0x1be fffff800`00b9cb90 fffff800`02c8696a : fffff800`02e04e80 fffff800`02e12cc0 00000000`00000002 fffff880`00000000 : nt!KiRetireDpcList+0x277 fffff800`00b9cc40 00000000`00000000 : fffff800`00b9d000 fffff800`00b97000 fffff800`00b9cc00 00000000`00000000 : nt!KiIdleLoop+0x5a STACK_COMMAND: kb FOLLOWUP_IP: tcpip!TcpTryToContinueRcvWndTuning+9b fffff880`016ea77b f083471001 lock add dword ptr [rdi+10h],1 SYMBOL_STACK_INDEX: 7 SYMBOL_NAME: tcpip!TcpTryToContinueRcvWndTuning+9b FOLLOWUP_NAME: MachineOwner MODULE_NAME: tcpip IMAGE_NAME: tcpip.sys DEBUG_FLR_IMAGE_TIMESTAMP: 4e83e948 FAILURE_BUCKET_ID: X64_0x1E_tcpip!TcpTryToContinueRcvWndTuning+9b BUCKET_ID: X64_0x1E_tcpip!TcpTryToContinueRcvWndTuning+9b Followup: MachineOwner ---------
  1. Caused by BitDefender. Other possible causes are Memory problems... Corrupted hard disk file system... Drivers... corrupted SCSI or IDE Drivers...
  2. Possible causes are Memory problems... Graphics card memory problems... BIOS... Corrupted hard disk file system... Corrupted System Files... Missing Windows Updates... Drivers...
  3. Typically caused by network adapter drivers, a bad adapter, or bad network settings. Make sure your network adapter drivers are up to date and let us know if you have made any changes to your network settings from those created by Windows as defaults. Other possible causes are Memory problems... Viruses... Corrupted hard disk file system... Corrupted System Files... Lack of Windows updates... Drivers...

BitDefender is known to cause blue screen crashes on some systems. Please remove using the steps for uninstalling BitDefender using the uninstall tool; do not use the system tools for uninstalling the program. Replace BitDefender with the Good and Free system security combination.

Proceed with the memory tests and other hardware tests, and answer my questions above the .dmp file analysis.
My System SpecsSystem Spec
17 Feb 2012   #13
Boudi

windows 7 ultimate x64
 
 

I's about 85% sure the BSOD problem is now fixed... thats still not 100% but non the less, pretty good.

I uninstalled Bitdefender as you wisely suggested and still havent installed any anti-virus yet, will dos so now though.

I thought I would update the integrated graphics accelerator driver which I D/L from Intel's site as opposed to Asus where i was previously d/l my drivers from, and that seems to have fixed the issue thus far. I have had 2 movies playing at on with, had i/e open opened programs of all sorts and still didn't get get the BSOD.

I am still expecting one though... I'll give it a week at least before I celebrate... I might even take a holiday if this works.
My System SpecsSystem Spec
.

17 Feb 2012   #14
writhziden

Windows 7 Home Premium 64 Bit
 
 

Alright, run your normal routine for a while (a week or two) and post back whether it is stable.
My System SpecsSystem Spec
17 Feb 2012   #15
Boudi

windows 7 ultimate x64
 
 

...Actually I spoke too soon, I have attached the dump file and another dumpfile generated by blue screen view, maybe it will help I'm not sure

I will go ahead with the prime 95 test tomorrow when I get enough time.

The sfc/scannow came up with "no integrity violations", or what ever it usually says.

I really appreciate your time and effort mate, cheers!


edit..

I probably should add, I did a clean re-install of windows, mainly due to the fact that I had downloaded so much freeware to try and resolve this issue and wanted to start off fresh... untill it happened again..
My System SpecsSystem Spec
17 Feb 2012   #16
writhziden

Windows 7 Home Premium 64 Bit
 
 

Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [F:\BSODDmpFiles\Boudi\Windows_NT6_BSOD_jcgriff2\021812-26301-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is: 
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Machine Name:
Kernel base = 0xfffff800`02a1a000 PsLoadedModuleList = 0xfffff800`02c5f670
Debug session time: Fri Feb 17 08:26:55.137 2012 (GMT-7)
System Uptime: 0 days 0:34:38.058
Loading Kernel Symbols
...............................................................
................................................................
..................
Loading User Symbols
Loading unloaded module list
....
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 101, {19, 0, fffff880009b3180, 4}

Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

CLOCK_WATCHDOG_TIMEOUT (101)
An expected clock interrupt was not received on a secondary processor in an
MP system within the allocated interval. This indicates that the specified
processor is hung and not processing interrupts.
Arguments:
Arg1: 0000000000000019, Clock interrupt time out interval in nominal clock ticks.
Arg2: 0000000000000000, 0.
Arg3: fffff880009b3180, The PRCB address of the hung processor.
Arg4: 0000000000000004, 0.

Debugging Details:
------------------


BUGCHECK_STR:  CLOCK_WATCHDOG_TIMEOUT_8_PROC

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

PROCESS_NAME:  System

CURRENT_IRQL:  d

STACK_TEXT:  
fffff880`009a9628 fffff800`02aee8c9 : 00000000`00000101 00000000`00000019 00000000`00000000 fffff880`009b3180 : nt!KeBugCheckEx
fffff880`009a9630 fffff800`02aa1497 : 00000000`00000000 fffff800`00000004 00000000`00002710 00000000`00000000 : nt! ?? ::FNODOBFM::`string'+0x4e2e
fffff880`009a96c0 fffff800`0300d895 : fffff800`03033460 fffff880`009a9870 fffff800`03033460 00000000`00000000 : nt!KeUpdateSystemTime+0x377
fffff880`009a97c0 fffff800`02a93173 : 00000000`4a3435de fffff800`02c0ce80 00000000`00000000 00000000`00000000 : hal!HalpHpetClockInterrupt+0x8d
fffff880`009a97f0 fffff800`02acd30d : fffff800`02c0ce80 00000000`00000001 00000000`00000000 00000000`00000000 : nt!KiInterruptDispatchNoLock+0x163
fffff880`009a9980 fffff800`02a9c7cc : 00000000`00000000 fffff880`009a9ab8 00000000`00000000 00000000`00000000 : nt!KxFlushEntireTb+0x79
fffff880`009a99c0 fffff800`02a5e469 : 00000000`00000078 00000000`0000007f fffffa80`01c79fd0 00000000`00000080 : nt!KeFlushMultipleRangeTb+0x28c
fffff880`009a9a90 fffff800`02a5ecb7 : 00000000`00097d00 00000000`0000007f 00000000`00000000 00000000`00000000 : nt!MiZeroPageChain+0x14e
fffff880`009a9ad0 fffff800`02d31fee : fffffa80`06d02b60 00000000`00000080 fffffa80`06d02040 fffff800`02a885d9 : nt!MmZeroPageThread+0x83a
fffff880`009a9c00 fffff800`02a885e6 : fffff800`02c0ce80 fffffa80`06d02b60 fffff800`02c1acc0 00000000`00000000 : nt!PspSystemThreadStartup+0x5a
fffff880`009a9c40 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KxStartSystemThread+0x16


STACK_COMMAND:  kb

SYMBOL_NAME:  ANALYSIS_INCONCLUSIVE

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: Unknown_Module

IMAGE_NAME:  Unknown_Image

DEBUG_FLR_IMAGE_TIMESTAMP:  0

FAILURE_BUCKET_ID:  X64_CLOCK_WATCHDOG_TIMEOUT_8_PROC_ANALYSIS_INCONCLUSIVE

BUCKET_ID:  X64_CLOCK_WATCHDOG_TIMEOUT_8_PROC_ANALYSIS_INCONCLUSIVE

Followup: MachineOwner
---------
Refer to STOP 0x101: CLOCK_WATCHDOG_TIMEOUT troubleshtg.
My System SpecsSystem Spec
20 Feb 2012   #17
Boudi

windows 7 ultimate x64
 
 

I have been receiving a high number of BSOD lately, and still haven't had the chance to be home long enough to run prime95 and monitor my system at the same time so I decided to test my RAM again just in case, I ran MEMTEST86+ one stick at a time and both showed no errors. so i booted my system with one stick and got BSOD's like no tomorrow, I then removed that stick and put the second stick in, went through my usual routine and haven't had a crash for about 2 hours so far. Now my question is could it be possible the MEMTEST wasn't able to pick up errors on the RAM?

Its strange because the 1st stick I tried crashed on almost everything I did, my system even started to crash before completely booting.

And also what would be the optimal settings for the ram in bios? I have everything set to auto in bios since I haven't got a clue what all the CAS etc mean i just left it all to deafault. I reied googling but couldn't come up with anything..... about 5 hours now still stable.

I have G-skill ripjaws ddr3 1600 pc3 12800 4gbx2
My System SpecsSystem Spec
20 Feb 2012   #18
writhziden

Windows 7 Home Premium 64 Bit
 
 

Quote   Quote: Originally Posted by Boudi View Post
I have been receiving a high number of BSOD lately, and still haven't had the chance to be home long enough to run prime95 and monitor my system at the same time so I decided to test my RAM again just in case, I ran MEMTEST86+ one stick at a time and both showed no errors. so i booted my system with one stick and got BSOD's like no tomorrow, I then removed that stick and put the second stick in, went through my usual routine and haven't had a crash for about 2 hours so far. Now my question is could it be possible the MEMTEST wasn't able to pick up errors on the RAM?

Its strange because the 1st stick I tried crashed on almost everything I did, my system even started to crash before completely booting.

And also what would be the optimal settings for the ram in bios? I have everything set to auto in bios since I haven't got a clue what all the CAS etc mean i just left it all to deafault. I reied googling but couldn't come up with anything..... about 5 hours now still stable.

I have G-skill ripjaws ddr3 1600 pc3 12800 4gbx2
Memtest86+ does not always find errors. It only finds errors every time it runs if the RAM is outright failing. If the RAM is only starting to fail, the test may have to be run multiple times for seven passes each before errors show up.

If you do the following steps, we can help you determine the best settings for your RAM. Download and install CPU-Z and Upload screenshots of the CPU, Mainboard, Memory, and SPD tabs. In the SPD tab, upload an image of each slot.

Also, go into your BIOS and post all RAM and CPU Voltages and all RAM settings (timings, frequency, etc.)

Thanks to Dave76 for help learning RAM Stability
My System SpecsSystem Spec
21 Feb 2012   #19
Boudi

windows 7 ultimate x64
 
 

I can officially mark this as solved, it was a case of bad RAM. I ended up going back to where I bought it in exchange for new RAM.

A big thanks to Writhziden and every one else on this forum that does this everyday, your help is much appreciated! (Just realised I was kinda breaking out into a speech like I won something).
My System SpecsSystem Spec
21 Feb 2012   #20
writhziden

Windows 7 Home Premium 64 Bit
 
 

You won a working computer. Glad the RAM got it sorted.

Enjoy your computer!
My System SpecsSystem Spec
Reply

 BSOD Randomly/Mainly during Video playback




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Random BSOD and Crashes - VFX & Video diting, HD Video Playback, 3D
Hello all, I am looking for some assistance as to what is causing my computer to crash. It doesn't happen insanely often, but the way it crashes makes me think there's a hardware issue going on. I am mostly thinking it's either my CPU or one of my two graphics cards installed, but I'd be more...
BSOD Help and Support
BSOD IRQ_NOT_LESS_THAN_OR_EQUAL, randomly or during music playback
My computer has been locking up without a BSOD for two or three days now, during random things: programming in Dr. Java one day, and Minecraft another, but both time listening to music. It finally BSOD this last time, and I tried to figure out what was the issue using Bluescreenviewer and Windbg,...
BSOD Help and Support
Regular BSOD, sometimes during media playback, sometimes randomly
My pc often BSOD in recent months, finally managed to get error reporting to work, so I have now complied the info required. PC spec: Windows 7 Professional x64 Intel Core i5 2500K Unlocked Asus P8Z68-V PRO Z68 Socket 1155 8GB (2x4GB) Corsair Vengeance Blue Geforce GTS 250 Coolermaster...
BSOD Help and Support
BSOD on video playback
Hi guys, I'm having trouble with my laptop crashing fairly often on video playback, especially YouTube. I've had this computer (ASUS N61Vn) for a little over a year and haven't had any problems until about a month ago, and since then I've been getting blue screens almost daily. It usually happens...
BSOD Help and Support
BSOD during video playback
Hi, I first had a BSOD during video playback and now it's crashing every 10 mins or so. OS: Windows 7 Ultimate x64 SP1 MB: GB X58A-UD3R CPU: i7 930 VC: Geforce GTX 460 Please advise. Thanks.
BSOD Help and Support
BSOD during video playback
Been trying to figure this one out for a while, hope that someone here can help. I've been trying to get playback of video to work on my new laptop (Dell Latitude E6510). After maybe 30 seconds of playback, I get a system crash. Sometimes it's closer to 1 minute, sometimes closer to 10 seconds....
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 05:16.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App