Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD at startup, error 0x000000ED

11 Feb 2012   #1
EpicJungle

Windows 7 Home Premium 64bit
 
 
BSOD at startup, error 0x000000ED

Hi, I have a Dell Inspiron N5110 with Windows 7 Home Premium 64bit pre-installed.
When I try to startup, it gets past the Windows logo then goes to the BSOD, error 0x000000ED.

I've tried booting in the Last Known Good Configuration, and Safe Mode.
The 'Repair Your Computer' option doesn't do anything either.

I have backup disks made from the Dell Backup and Recovery Manager and tried using it.
It came up with this:

"Windows has failed to start. A recent hardware or software change might be the cause.
To fix the problem:

1. Insert your windows installation disc and restart your computer.
2. Choose your language settings and click next.
3. Click repair your computer.

If you do not have this disc, contact your system administrator or computer manufacturer for assistance.

File: \windows\system32\boot\winload.exe
Status: 0xc00000011
info: the selected entry could not be loaded because the application is missing or corrupt."

I've also tried using my second backup. It loaded successfully into a normal looking screen, but no window popped up with options to choose from.

Please help, I need it fixed ASAP!
Thank you!


My System SpecsSystem Spec
.

11 Feb 2012   #2
writhziden

Windows 7 Home Premium 64 Bit
 
 

Use Advanced Boot Options to select Repair Your Computer and get to the System Recovery Options. Then select the command prompt. Do the following:
chkdsk /r c:
chkdsk /r d:
chkdsk /r e:
chkdsk /r f:
.etc until you get the message that the volume could not be opened for direct access. For any drives that do not give the message:
"Windows has checked the file system and found no problems"
run chkdsk again as above. In other words, if it says:
"Windows has made corrections to the file system"
after running the disk check, run the disk check again.

I realize you may only have one disk show up in Windows explorer, but you may have more than one disk through recovery options. This is because the system creates a hidden boot partition (which will be C: in recovery), you may have a recovery partition for your PC that is hidden (which will be D: in recovery), and you will have your primary Windows partition (which may be E: in recovery). A custom PC will likely have at least C: and D: to scan.
My System SpecsSystem Spec
11 Feb 2012   #3
EpicJungle

Windows 7 Home Premium 64bit
 
 

Hi, thanks for the reply -
I went tried the "Repair Your Computer" option in the Advanced Boot Options to get to the System Recovery Options. It would show it was loading the files, but then it would switch to the Windows Error Recovery, with the options:

Launch Startup Repair (recommended)
Start Windows Normally

I tried the startup repair option, and it acted the same way as the Repair Your Computer option.
Start Windows Normally just makes me go back to the BSoD.
My System SpecsSystem Spec
.


11 Feb 2012   #4
writhziden

Windows 7 Home Premium 64 Bit
 
 

You will probably need to use a repair disc to get into the recovery options then. Create a Windows 7 System Repair Disc — MAXIMUMpcguides – Windows 7 tips, tricks, help, and how-to guides
My System SpecsSystem Spec
11 Feb 2012   #5
EpicJungle

Windows 7 Home Premium 64bit
 
 

I only have access to a different Netbook (Windows 64bit also) with no CD drive available, and I cannot get my hands on an external one. Is it possible to make one with a USB?

Also, I have another laptop (from work) with a CD drive available, but it runs on Windows XP. Is it possible to create one with that? Or maybe use it's CD drive for the Netbook?

Thanks.
My System SpecsSystem Spec
11 Feb 2012   #6
writhziden

Windows 7 Home Premium 64 Bit
 
 

You can make a USB version. Get Gentoo Linux Bootable USB Maker for Kaspersky (I know it says Kaspersky, but it is actually a Gentoo bootable USB creator for ISO files). You unzip Gentoo, put the ISO file into the Gentoo folder, and run fixgt2.bat to create a bootable USB. You will have to find an ISO of the repair disc.
My System SpecsSystem Spec
11 Feb 2012   #7
EpicJungle

Windows 7 Home Premium 64bit
 
 

I have successfully created a USB version or the repair disk.
Now, how can I use it?
My System SpecsSystem Spec
11 Feb 2012   #8
writhziden

Windows 7 Home Premium 64 Bit
 
 

You need to make sure in your BIOS that you have USB boot devices enabled. Most of the time, the BIOS has this option, especially in newer computers. Just make sure the boot order includes such devices.
My System SpecsSystem Spec
12 Feb 2012   #9
EpicJungle

Windows 7 Home Premium 64bit
 
 

I tried booting the USB. However, it came up with a screen showing:

"SYSLINUX 3.51 2007-06-10 EBIOS Copyright (C) 1994-2007 H. Peter Anvin
Could not find kernel image: linux
boot: _ "

From there I could type anything beside the "boot: ".
What seems to be the problem?
My System SpecsSystem Spec
12 Feb 2012   #10
writhziden

Windows 7 Home Premium 64 Bit
 
 

It's trying to find a linux based bootable USB and yours is Windows based. I just learned something new. See if Boot Windows 7 System Repair Disc from USB Using Grub4Dos works better.
My System SpecsSystem Spec
Reply

 BSOD at startup, error 0x000000ED




Thread Tools





Similar help and support threads
Thread Forum
BSOD 0x000000ED STOP error.
I have a laptop and it has been working fine for the most of time. Just recently, after a restart, my laptop doesn't boot. I had to disable automatic restart to see the BSOD: a STOP error 0x000000ED Unmountable_Boot_Volume (specifically: 0xFFFFFA80080468C0, 0xFFFFFFFFX0000185, 0x0000000000000000,...
BSOD Help and Support
BSOD Upon startup. 0x000000ED
Hello, running windows 7 Home Premium. upon startup i get the bsod with the code... 0x000000ED (FFFFFA8004A3BCD0, 0XFFFFFFFF0000185,00000......) I have tried last known good config. i have tried both repair my computer in f8 and startup repair on a disc and usb. They get stuck on setup is...
BSOD Help and Support
BSOD when booting computer, error 0x000000ed
Hi guys, I have been encountered a problem of my windows 7 (Windows 7 Ultimate x64). The problem is when I try to boot my windows 7, it fails and a blue screen appears, stating that the error message "Stop: 0xed". I try to repair windows, but it fails. So, I reinstall my windows 7. And it works...
BSOD Help and Support
BSOD startup loop, error 0X000000ED
I am getting an unmountable boot volume error for my Win 7 64 bit Acer Aspire 5750-6627. I have tried all the safe mode options, but those do not work. Windows cannot startup normally. And I cannot get to startup repair either. I tried using a Win 7 disc to get to the recovery options, which got me...
BSOD Help and Support
BSOD at startup, error 0x000000ED unmountable boot volume
Hi guys. Had this error yesterday after starting the computer. Did a startup repair but it didnt fix it. Can't boot into safe mode. Right now doing startup repair again. Any suggestions? Is it likely a problem with the hard drive?
BSOD Help and Support
BSOD during Windows 7 startup error *** STOP 0x000000ED
Specs - Samsung N150 Plus (1GB RAM, Intel Atom processor) - Windows 7 Starter x86 OEM (Original OS) - Age - Just over a year old and no OS re-installation More specs - Support for NP-N150P Hi, I have my friends net-book and all of a sudden it generated a error where it had to be restarted...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:30.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App