Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Random BSOD , IRQL_NOT_LESS_OR_EQUAL (a)

13 Feb 2012   #1
zigzag441104

Windows 7 64 bit
 
 
Random BSOD , IRQL_NOT_LESS_OR_EQUAL (a)

Hi! I got some BSOD now every day when i play or just watching movies or internet. I have 2 ssd hardrives in raid 0 mode .I need help and i have trayed to read the minidump files.

HERE IS THE FIRST ONE:

*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 1000000A, {f0e4dff0, 2, 1, 80514490}
Probably caused by : memory_corruption ( nt!MiCompleteProtoPteFault+30 )
Followup: MachineOwner
---------
2: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: f0e4dff0, memory referenced
Arg2: 00000002, IRQL
Arg3: 00000001, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: 80514490, address which referenced memory
Debugging Details:
------------------

WRITE_ADDRESS: f0e4dff0
CURRENT_IRQL: 2
FAULTING_IP:
nt!MiCompleteProtoPteFault+30
80514490 834e0c08 or dword ptr [esi+0Ch],8
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: DRIVER_FAULT
BUGCHECK_STR: 0xA
PROCESS_NAME: RpcSandraSrv.ex
LAST_CONTROL_TRANSFER: from 80515dc6 to 80514490
STACK_TEXT:
b325ec68 80515dc6 00000000 00435080 c00021a8 nt!MiCompleteProtoPteFault+0x30
b325ece0 8051fdf6 e132c1f0 00435080 c00021a8 nt!MiDispatchFault+0x636
b325ed4c 80543810 00000008 00435080 00000001 nt!MmAccessFault+0x111c
b325ed4c 00435080 00000008 00435080 00000001 nt!KiTrap0E+0xd0
WARNING: Frame IP not in any known module. Following frames may be wrong.
0231f7dc 00000000 00000000 00000000 00000000 0x435080

STACK_COMMAND: kb
FOLLOWUP_IP:
nt!MiCompleteProtoPteFault+30
80514490 834e0c08 or dword ptr [esi+0Ch],8
SYMBOL_STACK_INDEX: 0
SYMBOL_NAME: nt!MiCompleteProtoPteFault+30
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nt
DEBUG_FLR_IMAGE_TIMESTAMP: 4b7a91dc
IMAGE_NAME: memory_corruption
FAILURE_BUCKET_ID: 0xA_nt!MiCompleteProtoPteFault+30
BUCKET_ID: 0xA_nt!MiCompleteProtoPteFault+30
Followup: MachineOwner
---------

HERE IS THE OTHER:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 1000000A, {0, 2, 1, 805219f0}
Probably caused by : memory_corruption ( nt!MiRemovePageByColor+66 )
Followup: MachineOwner
---------
0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: 00000000, memory referenced
Arg2: 00000002, IRQL
Arg3: 00000001, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: 805219f0, address which referenced memory
Debugging Details:
------------------

WRITE_ADDRESS: 00000000
CURRENT_IRQL: 2
FAULTING_IP:
nt!MiRemovePageByColor+66
805219f0 ff08 dec dword ptr [eax]
CUSTOMER_CRASH_COUNT: 2
DEFAULT_BUCKET_ID: DRIVER_FAULT
BUGCHECK_STR: 0xA
PROCESS_NAME: System
LAST_CONTROL_TRANSFER: from 80521f1a to 805219f0
STACK_TEXT:
b84c37f4 80521f1a 0005f05c 00000000 00000000 nt!MiRemovePageByColor+0x66
b84c380c 8051be1f 00000000 00008000 00000000 nt!MiRemoveAnyPage+0xbc
b84c3840 80696b94 8a32a680 00000000 00000044 nt!MmZeroPageThread+0x153
b84c3dac 805ce85c 80087000 00000000 00000000 nt!Phase1Initialization+0x1288
b84c3ddc 8054537e 8069590c 80087000 00000000 nt!PspSystemThreadStartup+0x34
00000000 00000000 00000000 00000000 00000000 nt!KiThreadStartup+0x16

STACK_COMMAND: kb
FOLLOWUP_IP:
nt!MiRemovePageByColor+66
805219f0 ff08 dec dword ptr [eax]
SYMBOL_STACK_INDEX: 0
SYMBOL_NAME: nt!MiRemovePageByColor+66
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nt
DEBUG_FLR_IMAGE_TIMESTAMP: 4b7a91dc
IMAGE_NAME: memory_corruption
FAILURE_BUCKET_ID: 0xA_nt!MiRemovePageByColor+66
BUCKET_ID: 0xA_nt!MiRemovePageByColor+66
Followup: MachineOwner
---------
I hope somebody can help me!



I have done the memtest 100% OK! I run the ccleaner and antivirus check on every hdd nothing. I have upgrade all drivers to the latest new, and still nothing. The screen crash random with the attached picture.I tray to find the dump files to read, but i cant find them. I check the derictory where is they and everyting is ok they must be in the C/windows/minidump. I dont have any minidumps after crash!


My System SpecsSystem Spec
.
13 Feb 2012   #2
zigzag3143

Win 8 Release candidate 8400
 
 

Nice User name



These crashes were caused by memory corruption/exception (probably a driver).
Please run these two tests to verify your memory and find which driver is causing the problem.


* If you are overclocking anything reset to default before running these tests.
In other words STOP!!!

* If you have raid update its Driver.




Memtest.
Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.

RAM - Test with Memtest86+



Driver verifier

Quote:
Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

So, I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Special Pool", "Force Pending I/O Requests" and "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen.
Continue to use your system normally, and if you know what causes the crash, do that repeatedly.
The objective here is to get the system to crash because Driver Verifier is stressing the drivers out.
If it doesn't crash for you, then let it run for at least 36 hours of continuous operation.

Reboot into Windows (after the crash) and turn off Driver Verifier by going back in and selecting "Delete existing settings" on the first page, then locate and zip up the memory dump file and upload it with your next post.

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.
My System SpecsSystem Spec
Reply

 Random BSOD , IRQL_NOT_LESS_OR_EQUAL (a)




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Random BSOD IRQL_NOT_LESS_OR_EQUAL (a)
I get random BSOD. I did try to analyze the dump and got the following output. I am also attaching the minidump as zip file. Thanks ******************************************************************************* * *...
BSOD Help and Support
Random BSOD - IRQL_NOT_LESS_OR_EQUAL
Good Afternoon! Having some trouble with bsod with a laptop with windows 8 preinstalled , so i installed windows 7 instead and im still having randomly bsod commonly irql_not_less_or_equal but sometimes i get Page Fault Found In A Non Paged Area . Attached are the documents requested by the...
BSOD Help and Support
Random BSOD IRQL_NOT_LESS_OR_EQUAL.. Help
Having trouble with random BSOD and shut downs, please help. Thanks in advance.
BSOD Help and Support
Random BSOD: IRQL_NOT_LESS_OR_EQUAL
I'm getting a BSOD randomly. The machine will run flawlessly for a few weeks, and then crash 3 times in a single day. I haven't been able to associate it with any program, event, or activity. Whether I have a hundred programs running in the background, or I keep the number of programs running to...
BSOD Help and Support
Random BSOD (IRQL_NOT_LESS_OR_EQUAL)
I've been getting random BSOD all the time, but it only happens every month or so, so I ignored it. But these few BSOD happened often and recently when I was gaming with Skype on. It doesn't happen when I don't have Skype on. But I don't think that's the case. I'm wondering how to fix this. My...
BSOD Help and Support
BSOD Random 0xA, IRQL_NOT_LESS_OR_EQUAL
Hello i have noticed Recently that i have been Getting a BSOD i had about 3 Today i have a program called Who Crashed to analyze my Dump Files i will also include BSOD Dump & System File Collection app Files etc PC is about 3 years old (so is all the hardware except the GFX card is like 1 year...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 08:01.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App