Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD Windows 7 - ntoskrnl.exe+7cc40

19 Feb 2012   #11
garthrs

Windows Home Premium 64bit
 
 

Thanks. I'll give that a shot. One question: Since I have 15 passes in memtest86+ with existing driver, do I still need to run that hardware test?


My System SpecsSystem Spec
.
19 Feb 2012   #12
writhziden

Windows 7 Home Premium 64 Bit
 
 

Since memtest86+ does not care about Windows drivers, that test is unnecessary at this time. It may need to be run at some point again depending on what happens with the debugging we are currently doing, but you can skip it for now.
My System SpecsSystem Spec
20 Feb 2012   #13
garthrs

Windows Home Premium 64bit
 
 

I was discussing my issue with another gamer and he said he had a similiar issue that was caused by RAM latency.

He told me to make sure the mobo was set to the proper sdp settings for the ram... to include command rate of 2t.

I have the mobo (M4A77T/USB3) setting for latency set as per the sdp, but i cannot figure out how to adjust the command rate to 2t... Any advise? Could a ram setting issue report faults all over the troubleshooting map?

I have gotten a few more failures but the pc is running a second memtest86+ just in case. Once it finishes, i'll upload the dump(s).

Thanks for all the help, BTW!

**Edit**

Dump files uploaded.
My System SpecsSystem Spec
.

20 Feb 2012   #14
writhziden

Windows 7 Home Premium 64 Bit
 
 

You would adjust the command rate in the BIOS. Download and install CPU-Z and Upload screenshots of the CPU, Mainboard, Memory, and SPD tabs. In the SPD tab, upload an image of each slot.

Also, go into your BIOS and post all Voltages (CPU, RAM, NB, IMC, etc.) and all RAM settings (timings, frequency, etc.)

Thanks to Dave76 for help learning RAM Stability
My System SpecsSystem Spec
21 Feb 2012   #15
garthrs

Windows Home Premium 64bit
 
 

I'm on the way out the door for work now. I already have CPU-Z, GPU-Z, and AI Suite from ASUS. I'll get pics of it all.

One more troubleshooting step i ran through i had AI suite open through a crash seeing if CPU temp was an issue... maxed at 59C, case 29C.

I'm fairly certain that all my CPU settings are [Auto] and my cores are unlocked. But the rest, I'll post in about 7-8 hours. Thanks again!
My System SpecsSystem Spec
21 Feb 2012   #16
writhziden

Windows 7 Home Premium 64 Bit
 
 

Those temperatures should be fine, but that is a good troubleshooting step. Well done.

Look forward to your post with your settings.
My System SpecsSystem Spec
21 Feb 2012   #17
garthrs

Windows Home Premium 64bit
 
 

Here are the CPU-Z screens. Slots 1 and 2 are empty on my board.

I'll edit in Bios Setting in a moment.
My System SpecsSystem Spec
21 Feb 2012   #18
writhziden

Windows 7 Home Premium 64 Bit
 
 

Timings look good. What is your VDDNB Voltage set to?
My System SpecsSystem Spec
21 Feb 2012   #19
garthrs

Windows Home Premium 64bit
 
 

Grrr.. Could have sworn i took a picture of that. I'll post as soon as i can.
My System SpecsSystem Spec
21 Feb 2012   #20
writhziden

Windows 7 Home Premium 64 Bit
 
 

You took a picture of it set on Auto. If you set to Manual, what Voltage shows up?
My System SpecsSystem Spec
Reply

 BSOD Windows 7 - ntoskrnl.exe+7cc40




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD Windows 7 - ntoskrnl.exe+7cc40
hi, here is the issue: about two weeks ago I took my laptop to the service because its disk drive not seeing any cd or dvd than they changed it with a new one after that they said we updated the bios after 2 or 3 days later I'm on the Internet I got blue screen error driver power state failure,...
BSOD Help and Support
BSOD ntoskrnl.exe 7cc40
Im getting massive BSOD's every day. I can't even use this computer most hours and it'll probably BSOD in a few minuetes. Could someone look at the txt file I included and point me in the right direction? Or if I need more info please tell me!!! Because Im going crazy with this BSOD.
BSOD Help and Support
BSOD ntoskrnl.exe+7cc40
Have received this BSOD several times while the machine has been in Sleep Mode. Normal operation is to turn the monitor off and put the computer into that mode during the night. The BSOD is the normal DRIVER_POWER_STATE_FAILURE ntoskrnl.exe caused by address ntoskrnl.exe+7cc40. Desktop...
BSOD Help and Support
Random BSOD - ntoskrnl.exe (nt+7cc40) Please Help
Hello, I am getting BSOD every couple of days with no apparent reason sometime with doing virus scans, running windows movie maker and sometime while idle. Not sure what's going on please help - I have attached .dmp for assessment. ...
BSOD Help and Support
ntoskrnl.exe+7cc40 BSOD's
Hi, I have a new rig i built my self and it runs perfectly except the occasional BSOD and i cant for the life of me work out why... 091711-6006-01.dmp 17/09/2011 21:33:23 BAD_POOL_HEADER 0x00000019 00000000`00000003 fffff8a0`1205a820 ff8af8a0`1205a820 fffff8a0`1205a820 ...
BSOD Help and Support
BSOD ntoskrnl.exe+26ee0 ntoskrnl.exe+7cc40
Hi, I've been having this BSOD appear very randomly. IRQL_NOT_LESS_OR_EQUAL 0x0000000a (all reports in .rar file) Sometimes within 1 hour, other times as long as 24hrs+. I've got my BIOS/Drivers up to date for my CPU, Graphics Card, and Motherboard. I've rigorously tested my memory and have...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 17:23.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App