Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Random BSODs PAGE_FAULT_NONPAGED_AREA and MEMORY_MANAGEMENT tonight.

16 Feb 2012   #1
GDavidF

Windows 7 Pro 64bit
 
 
Random BSODs PAGE_FAULT_NONPAGED_AREA and MEMORY_MANAGEMENT tonight.

Hi all, been lurking here a while since regedit stuff for memory card readers (Brink?)during the W7 Beta. It seems you guys come top of the pops regarding STOP errors on Google so I'm all registered and hoping to work it out.

Now my recently running well computer has started with random BSODs...

Recently installed software for Logitech G700 and had a replacement Nokia E7-00 with the Nokia suite of pain installed- I'm thinking there could be an issue or two there...

Not sure how to add my edited system specs, are they visible?


Regards from Down under,
G'David


My System SpecsSystem Spec
.
16 Feb 2012   #2
zigzag3143

Win 8 Release candidate 8400
 
 

Several Problems


First. These were all caused by memory management Usually a driver



These crashes were caused by memory corruption/exception (probably a driver).
Please run these two tests to verify your memory and find which driver is causing the problem.


* If you are overclocking anything reset to default before running these tests.
In other words STOP!!!

* If you have raid update its Driver.




Memtest.
Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.

RAM - Test with Memtest86+



Driver verifier

Quote:
Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

So, I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Special Pool", "Force Pending I/O Requests" and "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen.
Continue to use your system normally, and if you know what causes the crash, do that repeatedly.
The objective here is to get the system to crash because Driver Verifier is stressing the drivers out.
If it doesn't crash for you, then let it run for at least 36 hours of continuous operation.

Reboot into Windows (after the crash) and turn off Driver Verifier by going back in and selecting "Delete existing settings" on the first page, then locate and zip up the memory dump file and upload it with your next post.

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.
Second really, really old drivers

These need updating.

Code:
SiWinAcc.sys    11/1/2004 2:23:29 PM    fffff880`01326000    fffff880`01330000    0x0000a000    0x41868d31                            
SiRemFil.sys    10/18/2006 5:20:39 PM    fffff880`01b0c000    fffff880`01b14000    0x00008000    0x4536a8b7                            
LVUSBS64.sys    2/3/2007 1:05:16 PM    fffff880`07bd4000    fffff880`07be0980    0x0000c980    0x45c4cedc                            
CamDrL64.sys    2/3/2007 1:17:27 PM    fffff880`0566f000    fffff880`05756a00    0x000e7a00    0x45c4d1b7                            
WinRing0x64.sys    7/26/2008 8:29:37 AM    fffff880`09d08000    fffff880`09d0f000    0x00007000    0x488b26c1
How To Find Drivers:
Quote:
- search Google for the name of the driver
- compare the Google results with what's installed on your system to figure out which device/program it belongs to
- visit the web site of the manufacturer of the hardware/program to get the latest drivers (DON'T use Windows Update or the Update driver function of Device Manager).
- if there are difficulties in locating them, post back with questions and someone will try and help you locate the appropriate program.
- - The most common drivers are listed on this page: Driver Reference Driver Reference
- - Driver manufacturer links are on this page: Drivers and Downloads
My System SpecsSystem Spec
08 Mar 2012   #3
GDavidF

Windows 7 Pro 64bit
 
 

Thankyou very much for your helpful post!

So sorry for the late reply Zigzag3143.. Wife, 2 children and a 6 day a week job distract me somewhat!

I'm still having the issues even if the memory seems OK. Have had a few Windows explorer appcrashes recently too...

It has moved to Memory management. will attach current latest dump stuff.

Quote:
SiWinAcc.sys 11/1/2004 2:23:29 PM
SiRemFil.sys 10/18/2006 5:20:39 PM
LVUSBS64.sys 2/3/2007 1:05:16 PM
CamDrL64.sys 2/3/2007 1:17:27 PM
WinRing0x64.sys 7/26/2008 8:29:37 AM
Trying to work my way through the drivers you've highlighted now. It's not easy finding how/why/what hardware the drivers belong is it?

However, I just installed the Logitec G700 a few weeks back and have had some issues with my Nokia E7-00 so...
My System SpecsSystem Spec
.

08 Mar 2012   #4
GDavidF

Windows 7 Pro 64bit
 
 
Some considerations...

SiWinAcc.sys and SiRemFil.sys are releted to Silicon Image which is the RAID controller on the OCZ Revodrive which I updated last weekend through their new firmware flash tool... I am still getting BSOD errors though...

LVUSBS64.sys and CamDrL64.sys part of logitec Quickcam Pro 4000 (which only has software support for O/Ss to Vista...) should I remove it completly?

WinRing0x64.sys is part of RealTemp_340, downloaded and installed V3.7..
My System SpecsSystem Spec
09 Mar 2012   #5
GDavidF

Windows 7 Pro 64bit
 
 

Repeated App crashes in IE9 and Media player and VLC all related to nvd3dum.dll
My System SpecsSystem Spec
11 Mar 2012   #6
GDavidF

Windows 7 Pro 64bit
 
 

Haven't seen a crash in 24hrs +...

I am starting to think it might be an nVidia drivers issue also...
My System SpecsSystem Spec
11 Mar 2012   #7
GDavidF

Windows 7 Pro 64bit
 
 
Must have jinxed myself...

All seemed good, plugged Nokia E7 into USB and completed backup. After opening around 8 tabs in IE9 IE had an appcrash an failed to render tab...

Any ideas?

Please? Have a day off tomorrow...
My System SpecsSystem Spec
11 Mar 2012   #8
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by GDavidF View Post
All seemed good, plugged Nokia E7 into USB and completed backup. After opening around 8 tabs in IE9 IE had an appcrash an failed to render tab...

Any ideas?

Please? Have a day off tomorrow...

Still old drivers

Code:
SiWinAcc.sys    11/1/2004 3:23:29 PM                               
SiRemFil.sys    10/18/2006 6:20:39 PM                             
LVUSBS64.sys    2/3/2007 2:05:16 PM                           
CamDrL64.sys    2/3/2007 2:17:27 PM       
WinRing0x64.sys    7/26/2008 9:29:37 AM                             
pccsmcfdx64.sys    8/28/2008 5:44:41 AM
Still memory corruption.



Did you run verifier or memtest?
My System SpecsSystem Spec
11 Mar 2012   #9
GDavidF

Windows 7 Pro 64bit
 
 

Memtested recently, I ran verifier a few weeks ago and it prevented windows from opening (way out of my depth).

Is there any way I could chase down the drivers that you know of?
My System SpecsSystem Spec
11 Mar 2012   #10
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by GDavidF View Post
Memtested recently, I ran verifier a few weeks ago and it prevented windows from opening (way out of my depth).

Is there any way I could chase down the drivers that you know of?
your system crash.

Re: drivers. google their name and if the date for the driver is before 7/13/2009 install them using compatibility mode.

Compatibility Mode



Not really. Verifier is supposed to make
My System SpecsSystem Spec
Reply

 Random BSODs PAGE_FAULT_NONPAGED_AREA and MEMORY_MANAGEMENT tonight.




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Constant MEMORY_MANAGEMENT bsods - please help
Hi all, I've recently had my computer repaired (previous problem seems fixed) and I've had it back about 5 days. for the last 3/4 I've had 3-4 MEMORY_MANAGEMENT BSODs a day, and I'm not sure how I should proceed. The SF Diagnostic tool file is attached. Any help would be greatly appreciated....
BSOD Help and Support
Random BSODs, MEMORY_MANAGEMENT and DRIVER_IRQL_NOT_LESS_OR_EQUAL
I got a MEMORY_MANAGEMENT BSOD while browsing the internet yesterday, then some hours later, while playing a game, I got the DRIVER_IRQL_NOT_LESS_OR_EQUAL one. The next day, I got another MEMORY_MANAGEMENT while watching a video. This is a new system, about 1 month old, so I'm pretty worried about...
BSOD Help and Support
Regular BSODs (mostly memory_management, pfn_list_corrupt etc.)
I've been getting BSODs almost daily for a while. They seemed to stop for a while, but now seem more common again. No pattern I can see (can be while browsing, or working) Often I get pfn_list_corrupt or memory_management I've tried running Mem86 but all looks good. Tried chkdsk and all...
BSOD Help and Support
Constant memory_management BSODs
So I've been getting a ton of BSODs recently. They seem to happen at random times. I'm usually using chrome or steam when it happens, but not limited to just those. I ran driver verifier for 36 hours straight and it never crashed once, so I don't think it would be a driver. I've also run...
BSOD Help and Support
Random BSODs, MEMORY_MANAGEMENT, ntoskrnl.exe
Hello, I was hoping someone could help me with a recurring BSOD issue. There doesn't seem to be any pattern as to when they occur; sometimes it will be a month in between instances, othertimes a day or a week. I've followed the instructions here: ...
BSOD Help and Support
MEMORY_MANAGEMENT random BSODs
Im having lots of trouble with my machine going bsod with the notice "MEMORY_MANAGEMENT". Looking around it seems the most likely cause is faulty memory. My memory does fail memtest86. However, using either one of my 2 memory modules alone leads to no bsods. One week ago, trying to solve the...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 02:22.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App