Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD on fresh install Windows 7

20 Feb 2012   #11
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Please upload all of the requested files.
Blue Screen of Death (BSOD) Posting Instructions
When posting any crash dump, include all System File Collection and health reports. They contain valuable information that we can use to find the cause of the crashes.

What were the unrelated issues you couldn't resolve before the re-installation?

Did you install the motherboard drivers from the Gigabyte website?

Your crashes:
Two of these, both the same.
Code:
PAGE_FAULT_IN_NONPAGED_AREA (50) - Invalid system memory was referenced.
Usual causes:  Defective hardware (particularly memory - but not just RAM), Faulty system service, Antivirus,  Device driver, NTFS corruption, BIOS
Could not read faulting driver name
PROCESS_NAME:  LWEMon.exe
IMAGE_NAME:  win32k.sys
Three of these, all the same.
Code:
DRIVER_VERIFIER_IOMANAGER_VIOLATION (c9) - The IO manager has caught a misbehaving driver.
DRIVER_VERIFIER_IO_VIOLATION_TYPE:  23b
Resource @ nt!PiEngineLock (0xfffff8000328eb80)    Available
WARNING: SystemResourcesList->Flink chain invalid. Resource may be corrupted, or already deleted.
WARNING: SystemResourcesList->Blink chain invalid. Resource may be corrupted, or already deleted.
IMAGE_NAME:  HIDCLASS.SYS - Windows Hid Class Library
These crashes are similar and all are naming Windows drivers.
Can you check that no microsoft drivers are included in the Driver Verifier?


Out of date or problematic drivers:
Code:
gdrv.sys     Fri Mar 13 11:22:29 2009 - Gigabyte Easy Saver - mobo power utility driver
GEARAspiWDM.sys Mon May 18 20:17:04 2009 - CD-ROM Class Filter Driver by Gear Software Also comes with iTunes
Un-install all Gigabyte utilities, for testing, they are known to cause crashes in Windows 7.
Un-install iTunes, for testing, it is known to cause crashes in Windows 7.


My System SpecsSystem Spec
.
20 Feb 2012   #12
pavey12

Windows 7 Ultimate x64
 
 

I included a system health report in my first post but can run it again and upload if necessary. I was having mouse issues where I would need to press ctrl alt del and then press cancel in the options screen just to be able to click on the start bar on boot up and it would intermitantly reoccur every time I would switch between programs. I believed it was a driver issue but couldn't resolve it after many attempts and gave up. But the problem still occurred even after formatting my drive and during the windows install I found myself unable to check boxes without pressing ctrl alt del. So now I'm assuming it's a hardware issue but am yet to test on another pc or try a different mouse.

Motherboard drivers were updated with latest gigabyte drivers immediately after windows installed.

I am currently posting from my phone, when I get to my pc I will clear my minidump folder and run verifier again so as to not accidentally upload files from before the test runs. I will also uninstall gigabyte utilities as well as iTunes and see how we go.
My System SpecsSystem Spec
20 Feb 2012   #13
pavey12

Windows 7 Ultimate x64
 
 

I've attached the latest minidump files since re-running verifier
My System SpecsSystem Spec
.

21 Feb 2012   #14
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Upload all of the requested files.
Blue Screen of Death (BSOD) Posting Instructions
When posting any crash dump, include all System File Collection and health reports. They contain valuable information that we can use to find the cause of the crashes.


First thing you should do is test your system with a different mouse and/or keyboard.
Keyboard and mouse hardware faults can cause havoc with a large range of Stop codes and errors.

All three crashes are the same, DRIVER_VERIFIER_IOMANAGER_VIOLATION (c9), and inconclusive.

Upload the other requested information files.
My System SpecsSystem Spec
21 Feb 2012   #15
pavey12

Windows 7 Ultimate x64
 
 

I found a cheap Microsoft laser mouse laying around which works fine. Keyboard is a Logitech g510 and is only a few days old. I've possibly found the cause and solution. There are reports of incompatibility between ddr3 1600mhz RAM and AMD chipsets, I have manually adjusted the memory speed and timing and am currently testing the new configuration. If it successfully runs without crashing I'll consider this solved, else I will upload requested files.
My System SpecsSystem Spec
21 Feb 2012   #16
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

You are right, there are a lot of people with the 1600MHz/AMD issue.

Run it at 1333MHz, test it for a while.
If your still having issues, manually set the first four timings (use the info on the CPUZ SPD tab) Command Rate to 2T, bump the CPU NB VID control +0.05v, the DRAM from 1.50v to 1.55v.
This should run stable, if not you can post back with your settings.
My System SpecsSystem Spec
22 Feb 2012   #17
pavey12

Windows 7 Ultimate x64
 
 

Two days and still no crash. I'm gonna go ahead an called this solved. Thanks everyone for your time and help.

For anyone coming across this in future with same problem, here's the guide I followed.
AMD CPU + G.Skill DDR3-1600 - GSKILL TECH FORUM

Cheers
My System SpecsSystem Spec
23 Feb 2012   #18
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

You're welcome.
Glad to hear you solved it, congrats.

It is a common practice to get your system stable before OC'ing, it can possibly be very difficult to get a stable OC if the system is not stable to start with. In your case it worked.
There are steps to follow when OC'ing, like find the max CPU frequency at stock voltage, then increase the CPU frequency and adjust the voltage to find the lowest voltage that your system will run stable at, the key is to keep the voltage as low as possible so it will run cooler.
Follow similar steps to OC the RAM, etc.
Sometimes plugging in numbers will work but, getting the system stable and cool as possible is the key.

Let us know if you have any more issues.
My System SpecsSystem Spec
Reply

 BSOD on fresh install Windows 7




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD ON fresh windows install
Hi guys, After some help troubleshooting this error if possible please. I did a brand new fresh install of windows on a system and have received the first BSOD after a few minutes of running the game "Archeage" Dump file attached. Any clues would be greatly appreciated thanks.
BSOD Help and Support
BSOD after fresh install of windows
Hello guys ive been having issues for quite a while now and ive been trying to solve this matter but so far ive only failed.. Ive ran memtest86 4.0a and i found several million errors. So i scanned through 1 and 1 ramslot to try to determine which ram was giving the errors, this only resulted...
BSOD Help and Support
BSoD after fresh Windows 7 install
Hello everyone, New member to the forums here and I was able to be pretty ninja-like when it came to getting information required to make a post in this forum. Bought a new computer 2 weeks ago, came in 3 days ago. Been having trouble with it since. Usually I'm the "Mr. Fix-it" when it...
BSOD Help and Support
BSOD Fresh install of windows 7 pro
I have been experiencing a BSOD on my fresh install of windows 7. I ran the upgrade adviser before upgrading and it said my hardware was 100% compatible. Here is the info: -32bit windows 7 pro -The original OS was XP home -Retail version of 7 pro -2.5 years since the date of purchase today at...
BSOD Help and Support
BSOD on fresh x64 Windows 7 Install
Hey, Just wondering if anyone can help. Installed I'm getting BSOD within a minute of startup of a fresh Windows 7 x64 Install. I've tried changing RAM and a couple of other things. I have as of yet not installed any programs, just updated my graphics card driver I can boot into safe...
BSOD Help and Support
Random BSOD - Fresh install, fresh system
Hi. I have installed a whole new windows 7 pro x64. My new mobo an ASus p5e3 pro along with new ram pc12800 gskill 2x2 ddr3 (running in 1066mhz due to my q6600) Everythingi s running perfectly...except some random BSOD. 4 total this week. I have posted a pack of dump file in here, the last 4...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 23:58.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App