Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD playing SWTOR 0x000000000000031

24 Feb 2012   #11
writhziden

Windows 7 Home Premium 64 Bit
 
 

stress.txt (Overclockers Australia Forums - View Single Post - Prime95 stress.txt file ???
Quote:
STRESS TESTING YOUR COMPUTER

BACKGROUND
----------

Today's computers are not perfect. Even brand new systems from major
manufacturers can have hidden flaws. If any of several key components such
as CPU, memory, cooling, etc. are not up to spec, it can lead to incorrect
calculations and/or unexplained system crashes.

Overclocking is the practice of increasing the speed of the CPU and/or
memory to make a machine faster at little cost. Typically, overclocking
involves pushing a machine past its limits and then backing off just a
little bit.

For these reasons, both non-overclockers and overclockers need programs
that test the stability of their computers. This is done by running
programs that put a heavy load on the computer. Though not originally
designed for this purpose, this program is one of a few programs that
are excellent at stress testing a computer.


RESOURCES
---------

This program is a good stress test for the CPU, memory, L1 and L2 caches,
CPU cooling, and case cooling. The torture test runs continuously, comparing
your computer's results to results that are known to be correct. Any
mismatch and you've got a problem! Note that the torture test sometimes
reads from and writes to disk but cannot be considered a stress test for
hard drives.

You'll need other programs to stress video cards, PCI bus, disk access,
networking and other important components. In addition, this is only one
of several good programs that are freely available. Some people report
finding problems only when running two or more stress test programs
concurrently. You may need to raise prime95's priority when running two
stress test programs so that each gets about 50% of the CPU time.

Forums are a great place to learn about available stability test programs
and to get advice on what to do when a problem is found.

The currently popular stability test programs are (sorry, I don't have
web addresses for these):
Prime95 (this program's torture test)
3DMark2001
CPU Stability test
Sisoft sandra
Quake and other games
Folding@Home
Seti@home
Genome@home

Several useful websites for help (look for overclocking community or forum):
Overclockers: The Performance Computing Community for Overclocking Hardware and How to Overclock Information
Ars Technica
HARDOCP - HardOCP Computer Hardware Reviews and News
AnandTech
Tom's Hardware: Hardware News, Tests and Reviews
PC Overclocking, Modding and Building | Sharky Extreme
Also try the alt.comp.hardware.overclocking Usenet newsgroup.

Utility programs you may find useful (I'm sure there are others - look around):
Motherboard monitor from livewiredev.com - dowload music Resources and Information.
Memtest86 from Memtest86.com - Memory Diagnostic
Cpuburn by redelm: http://pages.sbcglobal.net/redelm/
TaskInfo2002 from Iarsn - High Quality System Software


WHAT TO DO IF A PROBLEM IS FOUND?
---------------------------------

The exact cause of a hardware problem can be very hard to find.

If you are not overclocking, the most likely cause is an overheating CPU
or memory DIMMs that are not quite up to spec. Another possibility is
you might need a better power supply. Try running MotherBoard monitor
and browse the forums above to see if your CPU is running too hot.
If so, make sure the heat sink is properly attached, fans are operational,
and air flow inside the case is good. For isolating memory problems, try
swapping memory DIMMs with a co-worker's or friend's machine. If the errors
go away, then you can be fairly confidant that memory was the cause of
the trouble. A power supply problem can often be identified by a significant
drop in the voltages when prime95 starts running. Once again the overclocker
forums are a good resource for what voltages are acceptable.

If you are overclocking then try increasing the core voltage, reduce the
CPU speed, reduce the front side bus speed, or change the memory timings
(CAS latency). Also try asking for help in one of the forums above - they
may have other ideas to try.


CAN I IGNORE THE PROBLEM?
-------------------------

Ignoring the problem is a matter of personal preference. There are
two schools of thought on this subject.

Most programs you run will not stress your computer enough to cause a
wrong result or system crash. If you ignore the problem, then video games
may stress your machine resulting in a system crash. Also, stay away from
distributed computing projects where an incorrect calculation might cause
you to return wrong results. Bad data will not help these projects!
In conclusion, if you are comfortable with a small risk of an occasional
system crash then feel free to live a little dangerously! Keep in mind
that the faster prime95 finds a hardware error the more likely it is that
other programs will experience problems.

The second school of thought is, "Why run a stress test if you are going
to ignore the results?" These people want a guaranteed 100% rock solid
machine. Passing these stability tests gives them the ability to run
CPU intensive programs with confidence.


FREQUENTLY ASKED QUESTIONS
--------------------------

Q) My machine is not overclocked. If I'm getting an error, then there must
be a bug in the program, right?

A) The torture test is comparing your machines results against
KNOWN CORRECT RESULTS. If your machine cannot generate correct
results, you have a hardware problem. HOWEVER, if you are failing
the torture test in the SAME SPOT with the SAME ERROR MESSAGE
every time, then ask for help at mersenneforum.org - it is
possible that a recent change to the torture test code may have
introduced a software bug.

Q) How long should I run the torture test?

A) I recommend running it for somewhere between 6 and 24 hours.
The program has been known to fail only after several hours and in
some cases several weeks of operation. In most cases though, it will
fail within a few minutes on a flaky machine.

Q) Prime95 reports errors during the torture test, but other stability
tests don't. Do I have a problem?

A) Yes, you've reached the point where your machine has been
pushed just beyond its limits. Follow the recommendations above
to make your machine 100% stable or decide to live with a
machine that could have problems in rare circumstances.

Q) A forum member said "Don't bother with prime95, it always pukes on me,
and my system is stable!. What do you make of that?"

or

"We had a server at work that ran for 2 MONTHS straight, without a reboot
I installed Prime95 on it and ran it - a couple minutes later I get an error.
You are going to tell me that the server wasn't stable?"

A) These users obviously do not subscribe to the 100% rock solid
school of thought. THEIR MACHINES DO HAVE HARDWARE PROBLEMS.
But since they are not presently running any programs that reveal
the hardware problem, the machines are quite stable. As long as
these machines never run a program that uncovers the hardware problem,
then the machines will continue to be stable.


RAM timings look good. I will have to look into your voltages from the motherboard manual and what is recommended for your CPU since you did not post all voltages.

Do the following steps:
  • Update your BIOS as you said.


  • Set your DRAM voltage to 1.55 V through the image I have posted.


  • Bump your VCCIO voltage to 1.15 V through the image I have posted.
Attachment 200027



I do not know if the above settings will help since it sounds like you have a bad CPU, but hopefully the BIOS flash and the RAM settings will provide stability and it was not the CPU itself causing problems. Recommend running prime95 stress tests after doing all steps to see if errors still occur.


My System SpecsSystem Spec
.
28 Feb 2012   #12
flote

win 7 home 64 bit
 
 
Turns out I was overclocking >.<

I had selected the bios option with optimal performance and power use, and this apparently overclocked the RAM.

Thanks for the help and sorry for not realizing I should have tried turning this off.
My System SpecsSystem Spec
28 Feb 2012   #13
writhziden

Windows 7 Home Premium 64 Bit
 
 

No problem. Glad you were able to find the cause and solution. Best of luck!
My System SpecsSystem Spec
.

Reply

 BSOD playing SWTOR 0x000000000000031




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD playing SWTOR, Error 1e
BCCode: 1e BCP1: 0000000000000000 BCP2: 0000000000000000 BCP3: 0000000000000000 BCP4: 0000000000000000 OS Version: 6_1_7601 Service Pack: 1_0 Product: 768_1 Just playing SWTOR and it crashes almost every time within 30 minutes.
BSOD Help and Support
BSOD while playing WoW and SWTOR
I get the BSOD often when play WoW, and when I used to play SWTOR. I get it when there are no other programs running, and I don't have any virtual drive software installed. I tried looking up the most up-to-drivers according to EasyDriverPro, but didn't find them at the manufacturer's website. I...
BSOD Help and Support
BSOD Playing SWTOR
System Specs: Win 7 64 bit 16gb ram 1600mhz ddr3 cors. Dominator 60gb ssd 570 gtx GPU i7 920 @ 3.8 Had SWTOR running, skype up, the league of legends launcher and a few firefox pages. Got a random BSOD. Just did a fresh install this past weekend, and just got new memory as well. I...
BSOD Help and Support
BSOD playing SWTOR: Error 0x5
Hey guys, I recently made my first computer build and it was working fine for a few days, but now I'm beginning to see some lovely Blue Screens. I've got a long log of the blue screens and I've tried the typical checks for problems, but I just can't figure anything out. The computers new and I...
BSOD Help and Support
BSOD playing Games (BF3 / SWTOR)
Hi everyone, I have several crashes since I think all the times. Here is the story: Config in 2010 Antec Sonata 3 Asus p6T NOCTUA 12P
BSOD Help and Support
BSOD playing SWTOR after upgrading to SLI
Greetings, Last night I installed a second Gigabyte GV-N460OC-1GI (Nvidia GTX 460) in SLI. The following is a sequence of events leading up to the BSOD, which may shed some light on the issue. - Immediately after booting the PC, I received a "Chassis intruded, Fatal error, System halted"...
Graphic Cards


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 09:41.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App