New
#1
BSOD after completing clean install win7 64
Hello,
I recently completed a new build consisting all new hardware. Everything has gone fine until I installed windows. I am using,
-x64, (however I notice a program files x86 on the local disk as well but not sure
if it has anything to do with my problem, new to building my own system.)
-an OEM version that I purchased from a local computer store.
-the system is brand new.
-Windows 7 Home Premium 64bit SP1 (will be upgrading to ultimate when the system is stable.)
-Intel i5-2500k
-Asrock z68 extreme3 gen3
-G.SKILL Ripjaws Series 8gb ddr3 1333
-EVGA 01G-P3-1556-KR GeForce 550 Ti
-Intel 320 Series SSDSA2CW080G3K5 80GB Sata II MLC
-Seagate ST500DM002-1BC142 500GB 7200
-Corsair GS600
I am experiencing BSOD whenever I have the system powered down for more than 30 mins. If i restart, or shutdown and turn back on before this 30 min window the system loads up no problem. As time passes and I reboot frequently the system finally would get to a point where it wouldn't even load. I ran memtest the previous night with zero errors after completing 9 passes.
I switched the memory configuration to slots A2_B2 after realizing last night that is what the mobo manufacturer recommended. I then performed a clean install after resetting the CMOS, switched SATA from IDE to AHCI (Using an ssd, with current firmware and drivers) I have the most current drivers for the chipset, graphics, mobo.
I didn't get a blue screen this morning, just when I booted the os loaded a repair windows option/start windows normally. It auto defaulted to repair and attempted to load but never got past the black screen with the loading bar. I rebooted and selected "start windows normally" and now I am using the system to create this post.
Below is the attachment including my dump files and system health report,
Attachment 198935
Any help with this would be appreciated.
Thanks,
Donald