Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Operating System Crashing on Boot Up - Newly built machine

23 Feb 2012   #1

Windows 7 Home Premium 64 bit
Operating System Crashing on Boot Up - Newly built machine

Last night, I built my first desktop machine. Most of my components were brand new, but I kept my old hard drive.(Which contained my Windows Home Premium 64 bit OS on it.)

When I finally went to power it up for the first time, it booted up normally, and then when it goes to the black screen with the colors swirling together to make the windows logo, right away it quickly flashed to a blue screen and then restarted.

I then went into the repair windows mode, but the automatic repairs failed. They left me with these details:

Problem Signature 01: 6.1.7600.16385
Problem Signature 02: 6.1.7600.16385
Problem Signature 03: unknown
Problem Signature 04: 21200924
Problem Signature 05: Autofailover
Problem Signature 06: 3
Problem Signature 07: No Root Cause
OS Version: 6.1.7600.
Locale ID: 1033

The hard drive with the operating sytem was working fine for me yesterday in my old machine. So I am assuming it has to be a problem with the new hardware, or I failed to connect something, or i need to change a setting.

Any advice would be welcome. This is my first build, so i may have made a rookie mistake.

My System SpecsSystem Spec
23 Feb 2012   #2

Windows 7 Ultimate x64 SP1

Did you run Sysprep on the drive before removing it from the old computer? Most likely, the drive controllers are different, and that's the issue.

You could go through a bunch of steps to make it work on the new system, but it is always your best bet to do a fresh install. You have all new hardware, meaning all new drivers, etc. In the time it would take you to repair this and hopefully get it booting, you could be done the fresh install...and it will run better as well.
My System SpecsSystem Spec
23 Feb 2012   #3

Windows 7 Home Premium 64 bit

No, I did not run SysPrep before I pulled it from my old machine. I just unplugged it, and plugged it into my new machine.

I would prefer not to lose my data on the hard drive, but I bought a new hard drive with my new machine. I was going to do a fresh install on that drive last night, but my optical drive didnt have the right connector for my new MoBo, (IDE) so I havent had a chance to try that yet.

I have never swapped hard drive before, but I guess I didnt think about all the new drivers. I will have to find a new optical drive and go from there.

Thanks a lot for the reply.
My System SpecsSystem Spec

23 Feb 2012   #4

Windows 7 Professional 64-bit
BSOD error on Normal windows boot

I am getting a blue screen error on windows 7, 64-bit edition normal boot.

Error signature: 6.1.7600.
Id: 1033

yesterday i updated my windows 7 with .net framework.
I have attached .rar file which has both dump file and windows xml file.

I have tried system restore 3 times to go to 2 days back but it has not worked.
The windows safemode is booting and I can see all data , but it does not boot in normal mode.
I have tried dell diagnostics , it did not generate any errors.
Any help would be apprecaited.

My System SpecsSystem Spec
23 Feb 2012   #5

Windows 7 Ultimate x64 SP1

Quote   Quote: Originally Posted by Scubatoad View Post
I would prefer not to lose my data on the hard drive,
No one said anything about losing data. You could do a clean install on the new system with the new hard drive, and then connect your old drive later on to pull your old data off of.

Also, you could install Windows 7 from a USB flash drive, if needed. We have tutorials for that here, and it actually takes less time than installing from DVD.
My System SpecsSystem Spec

 Operating System Crashing on Boot Up - Newly built machine

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar help and support threads
Thread Forum
Random BSODs on newly built machine, all details inside
Hello all, As the title says I've been having random BSODs on my newly built machine. Mostly happens on startup, can't get passed the Windows Splash screen when it blue screens. All voltages check out in the BIOS, and memtest returns negative. I'm running a fresh genuine installation of...
BSOD Help and Support
Newly built machine randomly crashing
I just built a new machine a few days ago have been having some problems with it. The main problem is that it seems to, at random, get the BSOD when it's just sitting at the desktop. All parts are brand new straight out of the package and I'm running Windows 7 x64.
BSOD Help and Support
Newly Built System - 7 is crashing at boot up
Hello all, I recently built a new system to replace an old one for someone. Everything is new in this. It is running with a Intel Desktop DH55HC board, with an Intel Core i3 Processor . It's running 2x 1GB sticks of DDR3. Both of the hard drives from the old system , were put in the new system....
BSOD Help and Support
BSOD on newly built system
hey everyone i just built my new computer, yes it my first one i got it all assembled but im having problems with drivers im pretty sure thats what it is. this is the BSOD i get once in awhile playing Starcraft 2. Problem signature: Problem Event Name: BlueScreen OS Version: ...
BSOD Help and Support
BSOD newly built system
Just built up a 6 core AMD 1075T Asus M4A89GTD PRO 4 gig or ram ddr3 corsair dominator. Using 64 bit 7 and using on board graphics. Any Ideas would really help me out.:cry: Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7600. Locale ID: 1033 ...
BSOD Help and Support
No Boot Device, No operating system after Comodo Time Machine install
Hello, I have a ASUS G72 notebook with one 500 gb harddisk in it. On c drive, there was Windows 7 Home 64 bit, On d drive, there was Windows 7 ultimate 64 bit. i installed comodo time machine on c first, and then on d(as told by the program), and then computer restarted (as suggested on program...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 16:07.

Twitter Facebook Google+

Windows 7 Forums

Seven Forums Android App Seven Forums IOS App