Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD - Perfmon /report problems.


23 Feb 2012   #1

32 bit Windows7
 
 
BSOD - Perfmon /report timing out. Asking for multi-volume disks

I am attempting to upload a BSOD case to get reviewed here but I am being prompted by the perfmon /report function to insert the last disk of the multi-volume set.

What does this mean?


My System SpecsSystem Spec
.

23 Feb 2012   #2
JMH

Win 7 Ultimate 64-bit. SP1.
 
 

An alternative method re uploading the DMP's only...

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:
Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.
To ensure minidumps are enabled:
Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.
My System SpecsSystem Spec
24 Feb 2012   #3

32 bit Windows7
 
 

here is everything but the perfmon /report. I could not get that to run. I left the report function up overnight and when I came back into the office this morning it was in the same state I left it in: "collecting data for 60 seconds"
My System SpecsSystem Spec
.


24 Feb 2012   #4

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by TLITCentralPHX View Post
here is everything but the perfmon /report. I could not get that to run. I left the report function up overnight and when I came back into the office this morning it was in the same state I left it in: "collecting data for 60 seconds"
No DMPS included in upload. Try this method.

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:
Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.

To ensure minidumps are enabled:
Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.
My System SpecsSystem Spec
Reply

 BSOD - Perfmon /report problems.




Thread Tools



Similar help and support threads for2: BSOD - Perfmon /report problems.
Thread Forum
Solved Perfmon.exe /report not generating after installing bluetooth driver Performance & Maintenance
Can't run perfmon report BSOD Help and Support
Perfmon /report times out: transfer from a working machine? Performance & Maintenance
Having issues with BSOD file -perfmon/report BSOD Help and Support
perfmon /report Performance & Maintenance
BSOD report shows 3 problems BSOD Help and Support
BSOD, perfmon & other errors BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 03:45 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33