Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Random BSOD's, error 0xa

21 Mar 2012   #31
writhziden

Windows 7 Home Premium 64 Bit
 
 

In that case, can you post a screenshot of device manager with IDE ATA/ATAPI Controllers expanded. Start Menu -> Right click Computer -> Manage -> Device Manager from the list on the left... Alternatively: Start Menu -> Control Panel -> Hardware and Sound -> Device Manager.


Additionally, download and install CPU-Z and Upload screenshots of the CPU, Mainboard, Memory, and SPD tabs. In the SPD tab, upload an image of each slot.


My System SpecsSystem Spec
.
22 Mar 2012   #32
adrastea

Windows 7 Home Premium x64 OEM
 
 

Here's the images you asked for. Also, the attached text file contains the report for the disk check. Zipped up for easier attaching.
My System SpecsSystem Spec
22 Mar 2012   #33
writhziden

Windows 7 Home Premium 64 Bit
 
 

Quote:
Windows has made corrections to the file system.
Suggest you run the disk check again. See my previous post about this message.
My System SpecsSystem Spec
.

22 Mar 2012   #34
adrastea

Windows 7 Home Premium x64 OEM
 
 

Thanks. I'll do that. I never even noticed it said that.
My System SpecsSystem Spec
22 Mar 2012   #35
adrastea

Windows 7 Home Premium x64 OEM
 
 

Here's the second report:




Checking file system on C:
The type of the file system is NTFS.

A disk check has been scheduled.
Windows will now check the disk.

CHKDSK is verifying files (stage 1 of 5)...
238848 file records processed. File verification completed.
286 large file records processed. 0 bad file records processed. 0 EA records processed. 46 reparse records processed. CHKDSK is verifying indexes (stage 2 of 5)...
293770 index entries processed. Index verification completed.
0 unindexed files scanned. 0 unindexed files recovered. CHKDSK is verifying security descriptors (stage 3 of 5)...
238848 file SDs/SIDs processed. Cleaning up 9 unused index entries from index $SII of file 0x9.
Cleaning up 9 unused index entries from index $SDH of file 0x9.
Cleaning up 9 unused security descriptors.
Security descriptor verification completed.
27462 data files processed. CHKDSK is verifying Usn Journal...
35900816 USN bytes processed. Usn Journal verification completed.
CHKDSK is verifying file data (stage 4 of 5)...
238832 files processed. File data verification completed.
CHKDSK is verifying free space (stage 5 of 5)...
186508338 free clusters processed. Free space verification is complete.
Windows has checked the file system and found no problems.

976657407 KB total disk space.
230166492 KB in 167830 files.
87044 KB in 27463 indexes.
0 KB in bad sectors.
370519 KB in use by the system.
65536 KB occupied by the log file.
746033352 KB available on disk.

4096 bytes in each allocation unit.
244164351 total allocation units on disk.
186508338 allocation units available on disk.

Internal Info:
00 a5 03 00 e9 fa 02 00 49 9c 05 00 00 00 00 00 ........I.......
67 01 00 00 2e 00 00 00 00 00 00 00 00 00 00 00 g...............
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

Windows has finished checking your disk.
Please wait while your computer restarts.
My System SpecsSystem Spec
22 Mar 2012   #36
writhziden

Windows 7 Home Premium 64 Bit
 
 

Looks good. See how the system responds for a while and post back how things are going.
My System SpecsSystem Spec
27 Mar 2012   #37
adrastea

Windows 7 Home Premium x64 OEM
 
 

My computer stopped working for a bit starting this Monday. I hadn't used it all weekend, and Friday it had been working fine. It turned on, but had no display, which was odd since the monitor was detecting the DVI cable. I ran my PS3 through it no problem, so it wasn't the cable or the monitor. It's not my video card, since no video ports on my computer were sending out a signal. That goes for all 3 DVI's the two HDMI's, and the VGA. After messing around a bit inside the case, I got it to turn on. Then today it wasn't working again. I noticed this time that the Dr. Debug display was showing 2A. Since my motherboard's box and owner's manual is back home and I'm in college, I used my laptop to find a manual online. Apparently 2A means RAM issues. Which is funny since I thought I made sure they were in the slots tight and I ran Prime95 and Memtest86+ both longer than necessary with no errors. So I took out the fan that was blocking one of my RAM sticks and pushed it in pretty hard to make sure it wasn't loose. After that, my computer booted. Could it have been a slightly loose stick of RAM this entire time?
I haven't even given it a chance to blue screen since that, but I'm hoping that it's done, whether it was the RAM or the hard drive errors.
My System SpecsSystem Spec
27 Mar 2012   #38
writhziden

Windows 7 Home Premium 64 Bit
 
 

It very well could have been a loose RAM module; I have seen this cause crashes before. Let us know how the system responds over the next few days. Best of luck!
My System SpecsSystem Spec
Reply

 Random BSOD's, error 0xa




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Random BSOD's at random times often error 0x0000001E
Hello, after searching through many forums and Windows help sites i still can't help myself to find, why i am getting these bluescreens. I even installed Windows completely new, but after installing the Realtek GBE network driver (manually, cause Windows didn't find it) the 'fun' began again. I...
BSOD Help and Support
Random BSOD with random error code at random moment
Hello Ok now i'm out of solution so i come here hoping that someone could help me I always had bsod hapening randomly but not like the this week I got 2 bsod/day when i'm playing, when i'm staring at my monitor or even when i'm sleeping with random error code like 0x1e, 0x24, 0x3b, 0x4a or 0xa...
BSOD Help and Support
Random BSOD stop error 0x0000001E, hardware error?
Hello, A few days ago I got a random BSOD with the 0x0..1E stop error. Now my computer will rarely boot and when it does it still randomly gets the same BSOD. I once got a 1D stop error but its mostly 1E that keeps happening. I run Windows 7 Professional 64-bit and this time I used a Windows DVD...
BSOD Help and Support
Random BSOD's random error codes
Recently had my computer open and lying on it's side for around 5 days, put the cover back on and booted it up to play some WoW and started having BSOD's, constantly at windows log in, or 5-30 mins sitting at desktop or playing games. Including zipped folder of eventvwr files. Thanks in advance!
BSOD Help and Support
Random BSOD during Random times, error 0x8000000000000002
Hey everyone, Im new here on this forum. I've been having this extremely frustrating problem ever since i swapped out my Motherboard for a new one. I reformatted my computer multiple times, yet my computer seems to BSOD randomly. What happenes is that everything becomes unresponsive; cant...
BSOD Help and Support
Random BSOD's with random error messages after a new setup
Hey! I recently upgraded my setup with an Asus M4A78LT-M mobo, Athlon II X4 640 processor and TakeMS 2x2GB 1333MHz DDR3 memory. After installing the parts I tried to boot to Windows but it always resulted in the same BSOD so I reinstalled my system. After installing Windows for the first time...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 05:14.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App