Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: frequent BSOD caused by ntoskrnl.exe and many others on windows 7

06 Mar 2012   #21
arei33

Microsoft Windows 7 Home Premium 64 bit 7601 Multiprocessor Free Service Pack 1
 
 

hi there!! i'm done scanning and malwarebytes didn't detect any malicious items...

do i have to download and install all the 3 programs that you mention to monitor the temperatures?? do they automatically do the work or do i still need to run them to monitor temperatures??


My System SpecsSystem Spec
.

06 Mar 2012   #22
writhziden

Windows 7 Home Premium 64 Bit
 
 

I would download all three and see which seem to have accurate temperatures. If any give you idle temperatures below ambient (the temperature in the room the computer sits in), then that temperature software probably is not the most reliable for that sensor.

You will need to run them and watch them to monitor the temperatures. Some of them have logging features that may be used if the temperatures are accurate.

In one of your posts, provide both the temperatures when the computer is at idle and when it is under stress.
My System SpecsSystem Spec
06 Mar 2012   #23
arei33

Microsoft Windows 7 Home Premium 64 bit 7601 Multiprocessor Free Service Pack 1
 
 

i tried to install the real temp but it won't...it says the processor detected is not supported... as for the other two... i really don't know how to use them but i'm running speccy and here's an image:
My System SpecsSystem Spec
.


06 Mar 2012   #24
writhziden

Windows 7 Home Premium 64 Bit
 
 

No temperature shown for the CPU... What about HWInfo?

You may also have to try Core Temp
My System SpecsSystem Spec
06 Mar 2012   #25
arei33

Microsoft Windows 7 Home Premium 64 bit 7601 Multiprocessor Free Service Pack 1
 
 

ok i'll try core temp.... and about hwinfo...i don't know this is good enough...
My System SpecsSystem Spec
06 Mar 2012   #26
arei33

Microsoft Windows 7 Home Premium 64 bit 7601 Multiprocessor Free Service Pack 1
 
 

i need some help about using furmark coz i really don't know how to use it...
My System SpecsSystem Spec
06 Mar 2012   #27
writhziden

Windows 7 Home Premium 64 Bit
 
 

If the hwinfo readings are correct, and you are not doing any CPU intensive tasks (and probably even if you are doing intensive tasks), then your CPU temperatures are way too high. I would check your CPU thermal cooling devices: fans, thermal compound between CPU and heatsink, and the heatsink

Make sure you have the proper amount of thermal compound between the CPU and heatsink and that the fan is working properly.
My System SpecsSystem Spec
06 Mar 2012   #28
arei33

Microsoft Windows 7 Home Premium 64 bit 7601 Multiprocessor Free Service Pack 1
 
 

ok but how should i exactly do that??

here's a snapshot of core temp...which shows about the same temperature as the hwinfo...
and i'm really not doing any intensive task at the moment..
My System SpecsSystem Spec
06 Mar 2012   #29
writhziden

Windows 7 Home Premium 64 Bit
 
 

Since it is a laptop, I guess you do not unless you are comfortable taking it apart. Just run the tests above and see what temperatures things max out at. Acer may have to fix it if you find the temperatures get too high.

For FurMark, just download and install it, then run through the stability test. See STOP 0x116: VIDEO_TDR_ERROR troubleshooting for steps to use FurMark and setup the logging and testing.
My System SpecsSystem Spec
06 Mar 2012   #30
arei33

Microsoft Windows 7 Home Premium 64 bit 7601 Multiprocessor Free Service Pack 1
 
 

well i really don't have the courage to take it apart..i'm afraid i'll make the problem worse....so i'll just do what you told me to do...i'll get back to you after i'm done running the tests.

Thanks a lot for your help and for your patience!!
My System SpecsSystem Spec
Reply

 frequent BSOD caused by ntoskrnl.exe and many others on windows 7




Thread Tools





Similar help and support threads
Thread Forum
BSOD after installing fresh windows, caused by what seem ntoskrnl.exe
so i was reading up on it, and it was saying that a short in my keyboard could be the problem? so far it seems to be the same bug check code. and bug check string, but im not sure what to do with this information? i've attached all my information.
BSOD Help and Support
ntoskrnl.exe has caused BSOD
I have had 4 BSOD. Today, I was streaming using to Twitch with QuickSync on a Intel i3 2120. Boom a BSOD. I was also downloading something on steam also. I have noticed something very interesting in the "BlueScreenView" Application. 3 of the .dmp files have been caused by the "ntoskrnl.exe" My...
BSOD Help and Support
BSOD caused by ntoskrnl.exe
Hey guys, as the title says I've been getting BSOD about everyday now. I've tried troubleshooting on my own, but that hasn't worked. BCCode associated with them is either d1 or 9f (not sure if this helps). I've attached the SF log. I've run memtest86+ and haven't gotten a failure yet. I...
BSOD Help and Support
BSOD when start windows, error 0x0000006b,caused by driver ntoskrnl.ex
Hi, I need your help, got startup problem like in title. Computer works, but when I tried to reboot, the BSOD comes out and I must start system using my backup file. Please help or comments. I don't know how to change that driver file or disable it. I think it may works.. Thx for everything
BSOD Help and Support
Frequent BSOD recently; not sure what caused it.
Sorry for the poor title, but I didn't get enough time to read the BSOD before it restarted the computer. I have received BSOD 3 times in the past two days (all the same message but it disappears before I can read it). I have received maybe 2 or 3 others in the past couple months but it wasn't...
BSOD Help and Support
Frequent BSOD with massive slowdown, possibly caused by ntoskrnl.exe
Hello all. My computer with Windows 7 Home Edition x64 has been getting frequent BSOD as well as being super slow and unresponsive. I have attached a copy of the recent dump files hoping to find anything out as to why this is happening. I am appreciative for any input I receive.
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 10:39.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App