Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: I have BSOD happening everytime error 0x00000124

28 Feb 2012   #21
ePeen

Windows 7 Ultimate x64
 
 

The verifier enabled dump points to nvoclk64.sys as the culprit (nVidia System Utility Driver). Fully uninstall your video card drivers and install the latest here.


My System SpecsSystem Spec
.
01 Mar 2012   #22
superasso

Windows 7 64 bit
 
 

Here's a screen of what the driver writes to me
My System SpecsSystem Spec
01 Mar 2012   #23
superasso

Windows 7 64 bit
 
 

what should i do? i already installed every new driver,but i keep having BSOD

i am uploading some new dumps that seem to be different from the others
My System SpecsSystem Spec
.

04 Mar 2012   #24
superasso

Windows 7 64 bit
 
 

now my BSOD changed,the blue screen dissapears after a second
My System SpecsSystem Spec
05 Mar 2012   #25
writhziden

Windows 7 Home Premium 64 Bit
 
 

Please follow the http://www.sevenforums.com/crashes-d...tructions.html to upload your full crash reports. This will provide us with more information so we can provide accurate troubleshooting steps. Also, use System Info - See Your System Specs as a guide to fill out your system specs.

Follow the steps in Stop 0x124 - what it means and what to try to diagnose hardware problems. Use the following to supplement the hardware steps:
  • Monitor temperatures during the following tests.
    Use the following programs to monitor the temperatures.

  • Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).

    If you swap any memory components, follow these steps for ESD safety:
    1. Shut down and turn off your computer.
    2. Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
    3. Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
    4. Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working.
    Once these steps have been followed, it is safe to remove and replace components within your computer.
My System SpecsSystem Spec
Reply

 I have BSOD happening everytime error 0x00000124




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD is absolutely killing, Happening everytime I reboot now
This Dell desktop computer is farely new and these bsod screens are becoming more frequent, pleas help. I have attached the dmp file as I can not make head or tails from it. ps I am currently running it from safe mode.:confused:
BSOD Help and Support
BSOD at user log in page everytime, error 0x000000d1
Hi guys, been having this problem since yesterday Upon booting the system, all looks fine till it loads the user account log in screen whereit hangs, makes a screeching noise (speakers), followed by the BSOD. Then it collects data for crash dump and reboots. At the safe mode options, I've...
BSOD Help and Support
BSOD on cold startup everytime; 0x124_4 error
Hi, I have BSOD on a cold startup everyday. On most time after the first BSOD of the day the PC will run fine for that whole day. There will be two consecutive BSOD on certain occasions. The problem stops for a week after I updated the NEC USB 3.0 Host controller so it seems there is other...
BSOD Help and Support
BSOD happening, error 0x00000124 kinda freaking out...
Never had this happen to me before. uploaded the zip thing to the forum, hope i did that right. i also managed to take a screenshot http://i.imgur.com/pUGvX.jpg http://i.imgur.com/pUGvX.jpg?1?9727 I'm kinda freaking out I never had one of these before.:cry::cry::cry: please help :cry:
BSOD Help and Support
BSOD happening ramdomly Error Code 50
Hello I am new to the forums. I just built this system three day ago been having issues with error code 50 mostly. I already tested the RAM and it showed no errors after 10 hours of testing. The system specs are CPU - Intel Core i7 3770k Video Card - EVGA GTX 680 RAM - Corsair Vengeance...
BSOD Help and Support
BSOD 0x00000124 (happening at random times)
Hay guys, My computer recently has been getting the BSOD and not too sure as too why this is occurring, as i have built a pretty good system and only up until late last year its started happening but more often now i receive the STOP 0x00000124 message randomly whilst using my computer or...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 17:43.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App