Hi,
I recently experienced BSOD while using NetBeans IDE to send commands to my robot(project) through serial port. I actually connected a ZigBee module to my Serial Port and sent commands to my robot using interface created in NetBeans. This occurs everytime i use NB IDE.If using emulator no problem occurs. But i need to send commands through NB IDE only as part of my project.Please help!!I'll post my error page.
We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.
If you are overclocking STOP
You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.
To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.
The procedure:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.
To ensure minidumps are enabled:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.
Thanks for replying zigzag. I followed your procedure to enable minidump file.But when I went to the Windows/Minidump folder, its empty. What should I do?
DO a search for *.DMP
There are several reasons that may prevent you from having a DMP file in the usual places.
If you control panel is not configured for small dump you probably will then find it in C:\windows and it will be called MEMORY.dmp. It will overwrite every crash.
Other reasons are if you have UAC turned off, if you have a small page file, or a page file on a different HD than the OS.
Well I still can't find the dump file..Any other suggestions to find it?
Try this.
Please provide us with your Event Viewer Administrative logs by following these steps:
{Instructions courtesy of writhziden}
Click Start Menu
Type eventvwr into Search programs and files (do not hit enter)
Right click eventvwr.exe and click Run as administrator
Expand Custom Views
Click Administrative Events
Right click Administrative Events
Save all Events in Custom View As...
Save them in a folder where you will remember which folder and save as Errors.evtx
Go to where you saved Errors.evtx
Right click Errors.evtx -> send to -> compressed (zipped) folder
Upload the .zip file here.
Quote