Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Windows won't go past welcome screen!

03 Mar 2012   #11
ElieJK90

Windows 7 Home Premium
 
 

I did the check disk thing.. How do I see the results for it? Cause the computer restarted after it was done (I'm assuming) and I didn't get the chance to have a look at the screen to see the results.
I bought my laptop about a year and a half ago.


My System SpecsSystem Spec
.
03 Mar 2012   #12
ElieJK90

Windows 7 Home Premium
 
 

Oh and another thing. How do I create a System Restore point in safe mode? When I go into the control panel, system, I don't have "system security" on the left.. And I tried downloading the instant restore point thingie but that didn't work. The error said "This service cannot be started in safe mode".
My System SpecsSystem Spec
03 Mar 2012   #13
writhziden

Windows 7 Home Premium 64 Bit
 
 

You can get the disk check logs from the event viewer logs: Check Disk (chkdsk) - Read Event Viewer Log

Yeah, some functions do not work in safe mode, unfortunately...
My System SpecsSystem Spec
.

03 Mar 2012   #14
ElieJK90

Windows 7 Home Premium
 
 

Checking file system on C:
The type of the file system is NTFS.

A disk check has been scheduled.
Windows will now check the disk.

CHKDSK is verifying files (stage 1 of 3)...
263680 file records processed. File verification completed.
256 large file records processed. 0 bad file records processed. 2 EA records processed. 164 reparse records processed. CHKDSK is verifying indexes (stage 2 of 3)...
360266 index entries processed. Index verification completed.
0 unindexed files scanned. 0 unindexed files recovered. CHKDSK is verifying security descriptors (stage 3 of 3)...
263680 file SDs/SIDs processed. Cleaning up 2 unused index entries from index $SII of file 0x9.
Cleaning up 2 unused index entries from index $SDH of file 0x9.
Cleaning up 2 unused security descriptors.
Security descriptor verification completed.
48294 data files processed. CHKDSK is verifying Usn Journal...
33896384 USN bytes processed. Usn Journal verification completed.
Windows has checked the file system and found no problems.

312466431 KB total disk space.
106452348 KB in 208098 files.
147936 KB in 48295 indexes.
4 KB in bad sectors.
373535 KB in use by the system.
65536 KB occupied by the log file.
205492608 KB available on disk.

4096 bytes in each allocation unit.
78116607 total allocation units on disk.
51373152 allocation units available on disk.

Internal Info:
00 06 04 00 94 e9 03 00 50 95 07 00 00 00 00 00 ........P.......
6a 8d 00 00 a4 00 00 00 00 00 00 00 00 00 00 00 j...............
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

Windows has finished checking your disk.
Please wait while your computer restarts.
My System SpecsSystem Spec
03 Mar 2012   #15
ElieJK90

Windows 7 Home Premium
 
 

This is the log! Is my disk damaged?
My System SpecsSystem Spec
03 Mar 2012   #16
ElieJK90

Windows 7 Home Premium
 
 

Should I download the seep.sys thingie?
My System SpecsSystem Spec
03 Mar 2012   #17
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by ElieJK90 View Post
This is the log! Is my disk damaged?
Windows has checked the file system and found no problems. If you have more than one disk you should run it on all of them.

See the instructions on how to do that.
My System SpecsSystem Spec
03 Mar 2012   #18
ElieJK90

Windows 7 Home Premium
 
 

No other disks!!
My System SpecsSystem Spec
03 Mar 2012   #19
ElieJK90

Windows 7 Home Premium
 
 

Now what? ^^
My System SpecsSystem Spec
03 Mar 2012   #20
writhziden

Windows 7 Home Premium 64 Bit
 
 

You can check whether sfep.sys fixes the problem. More than likely, it will only resolve Verifier issues and power management problems, not boot problems.

Your boot issues in normal mode may be due to Windows file corruption. In safe mode, run SFC /SCANNOW Command - System File Checker up to three times to fix all errors with a restart in between each. Post back if it continues to show errors after a fourth run or if the first run comes back with no integrity violations.

Also, since you can get into Safe Mode with networking, can you follow the http://www.sevenforums.com/crashes-d...tructions.html and upload the reports using the following guide:
Screenshots and Files - Upload and Post in Seven Forums
That will help us determine any other possible reasons for your inability to run Windows normally.
My System SpecsSystem Spec
Reply

 Windows won't go past welcome screen!




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Windows Never goes past the Welcome Screen
As the title says, I simply cannot log in when I run in normal mode. I have to use safe mode, with netwok connections to type this currenty. I let the laptop sit for about two weeks, there seemed to be no problems before hand, but when I tried to turn it on several days ago, it was no longer...
General Discussion
Windows Won't Get Past Start up Screen
Hello, I use Windows 7 64-bit and it wont get past the start-up screen. I would like to retrieve some personal files from my hard drive before i reinstall windows, is there any way i can do this without removing my hard drive and as a last resort could you guys link to some good videos/guides that...
General Discussion
can get past windows screen just prior to the login
i would like some info or pointers on what i can do to get this laptop working, i have rebooted it in safe mode and it attempts to start up, it get to the point where the windows 7 blue log on screen shows up but does not have the login or user account part but the theme shows up, any help i...
General Discussion
Windows 7 won't boot past the loading screen
Hi, My problem is that windows 7 wont get past the loading screen when its loading the OS. I have noticed that it will work when i have only 2GB(one stick) in but when i try to put all 8GB(4 sticks) in, it wont work. This same thing happened when i was trying to install windows 7 from a fresh...
Installation & Setup
Can't get past starting windows screen
I am running a Linux OS right now and am trying to install windows 7. I turn on he computer and run off the disc. It let's me load off the cd but can't get past the starting windows screen. Above the starting windows is a spot of color but no other graphic. What do I do from here?
Installation & Setup
HELP! Windows 7 will not boot up past loading screen!
Ok, so iv put this computer together, installed windows 7 Ultimate 32bit and i got it up and running perfect for like a day. The next morning i switched it on and was working good for couple of hours then it seemed like the whole computer started to slow down and i got a blue screen error. so i...
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:25.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App