Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD when the computer is not doing anything

01 Mar 2012   #1
LJOE182

windows 7 64x
 
 
BSOD when the computer is not doing anything

Computer is left on and it restarts.

Crash reports are attached.

Windows 7 ultimate x86, this is on a fresh reformat with all updates installed.

Happens randomly, happened 4 times in 10 min, then it happened once in 6 hours.


My System SpecsSystem Spec
.
02 Mar 2012   #2
JMH

Win 7 Ultimate 64-bit. SP1.
 
 

> Asacpi.sys

The pre 2009 version of this driver is a known BSOD cause.
Yours is dated 2004.

Quote:
Please visit this link: Asus tek computer inc. -support- drivers and download p7p55d le

ASUSTeK Computer Inc. -Support- Drivers and Download P7P55D LE
ASUSTeK Computer Inc. - Motherboards- ASUS P5K-VM

Scroll down to the utilities category, then scroll down to the "atk0110 driver for windowsxp/vista/windows 7 32&64-bit" (it's about the 12th item down).

Download and install it.

Go to c:\windows\system32\drivers to check and make sure that the asacpi.sys file is date stamped from 2009 or 2010 (not before).


>
These crashes were caused by memory corruption/exception (probably a driver).
Please run these two tests to verify your memory and find which driver is causing the problem.


* If you are overclocking anything reset to default before running these tests.
In other words STOP!!!

* If you have Raid update its Driver.




Memtest.
Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.

RAM - Test with Memtest86+



Driver verifier

Quote:
Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

So, I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Special Pool", "Force Pending I/O Requests" and "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen.
Continue to use your system normally, and if you know what causes the crash, do that repeatedly.
The objective here is to get the system to crash because Driver Verifier is stressing the drivers out.
If it doesn't crash for you, then let it run for at least 36 hours of continuous operation.


Reboot into Windows (after the crash) and turn off Driver Verifier by going back in and selecting "Delete existing settings" on the first page, then locate and zip up the memory dump file and upload it with your next post.

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.
My System SpecsSystem Spec
02 Mar 2012   #3
LJOE182

windows 7 64x
 
 

Installed the ATK0110 drivers. Didn't help still crashed. In the process of verifying drivers and will post minidumps after the computer crashes.
My System SpecsSystem Spec
.

Reply

 BSOD when the computer is not doing anything




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD after I turn Computer NEW Computer on, or whilst sleeping
New computer keeps blue screening during or after my computer goes to sleep. Was told to upload this, and also it says part of the reason is in the Minidump folder or the Temp folder.
BSOD Help and Support
Computer suddenly froze, then a BSOD when restarting the computer.
As the title states my computer froze. It has frozen two times within 3 or 4 hours now, and on the last restart i had a BSOD straight after entering my password and logging into windows(Did not get the desktop). After another restart I've had no problems. Did a scan with Microsoft Security...
BSOD Help and Support
BSOD when starting computer in morning/bran new computer
Hi, iv decided to get some input to try and resolve this issue im having with my newly constructed PC. i will get straight to the point. i have just put together these new parts. Intel i5-3450 LGA1155 ASRock Z77 Extreme 4 8 gigs ballistix by crucial 2-4gb ddr3 1600 (pc3-12800) radeon...
BSOD Help and Support
BSOD while shutting down computer (1-week old new computer)
OS Name Microsoft Windows 7 Professional Version 6.1.7601 Service Pack 1 Build 7601 Other OS Description Not Available OS Manufacturer Microsoft Corporation System Manufacturer Gigabyte Technology Co., Ltd. System Type x64-based PC Processor Intel(R) Core(TM) i7-3770K CPU @ 3.50GHz,...
BSOD Help and Support
BSOD semi-randomly. Self built computer. (BSOD dump.zip included)
64 bit, full retail. Hardware is 1 month old (built myself) OS was installed when I built it from a USB drive (did not include an optical drive in the build) SPECS: i5 2500k ATI 7850 GPU corsair tx650 PSU ASRock Extreme3 Gen3 motherboard Corsair vengance 1600 ddr3 ram (2x4gb)...
BSOD Help and Support
Computer Freezes, then shutdown BSOD Computer NO signal
Hi I need help since my computer freezes randomly lately and BSOD with Locale Id: 13321 Yes, I said randomly, Now I'm lucky that my computer didn't freeze but if I shut this down and use it again later or tomorrow it may freeze then BSOD again. Problem Signature Problem Event name:...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:30.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App