Windows 7: Random BSOD

Hi all,

Hoping someone can help me out with this. I've been getting some random BSODs lately and hoping someone can tell me what the cause is. I'm not sure, but it seems to happen when I plug in a USB device (flash-drive, gamepad, etc.) after the pc has been booted. Other USB devices are attached to the system and don't seem to be causing an issue. Of course, it may just be a coincidence as well.

Anyway, attached are the files. Any help would be greatly appreciated!

System Specs:
ASRock P67 Extreme4 Gen3
Core i5 2500K @ 4.6Ghz
Corsair 600T Chassis
Corsair H70 Water Cooling
16GB (4x4) GSkill F3-12800 DDR3
1 x Crucial C300 128GB SSD (OS)
2 x Seagate 320GB HDD (Raid 0)
SB X-Fi
Thermaltake 850W PS


Mike

You have a hardware error (0x124). Read the following thread and see if any of it's fixes work.
Stop 0x124 - what it means and what to try

As mentioned in the above post, do the following hardware stress tests:

Test your video card using Furmark. Watch your machine's temps and stop the test if it starts to overheat or artifacts appear on the screen.
Video Card - Stress Test with Furmark

Test your hardware using Prime95. Watch your machine's temps and stop the test if it starts to overheat. Let it run for up to 2 hours or until errors have been found.
Hardware - Stress Test With Prime95

Test your RAM using Memtest86+. Let it run until 6-8 passes have completed or errors have been found.
RAM - Test with Memtest86+

If you are overclocking, STOP. Reset any changed values back to default.