Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD Problems - appears to be same device...

05 Mar 2012   #1
gweglarz

Windows 7 64 Professional
 
 
BSOD Problems - appears to be same device...

I just started having these problems over the past month. Nothing changed; except that I had a replacement MoBo installed on Thursday. Ran full burn in; but the BSOD's seem to point to the same memory adress as the ones that ocurred before the new MoBo.

Alienware Aurora i7 x 980
18 GB Ram
nVidia Quadro 4000


My System SpecsSystem Spec
.

05 Mar 2012   #2
mgorman87

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64bit
 
 

You said you swapped mobo's on thursday?
Original Install Date: 1/29/2011, 3:53:43 PM

I think you need to reinstall your OS?

Please run these tests and report back the results
1. Memtest86 - Run for 7-8 passes - RAM - Test with Memtest86+
2. Prime95 - Run all three tests for 3-4 hours each or until fail - Hardware - Stress Test With Prime95
3. Hard drive scan usings SeaTools - SeaTools for Windows | Seagate - Both long and short tests


BSOD BUGCHECK SUMMARY
Code:

Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Wed Feb  8 18:57:17.157 2012 (UTC - 5:00)
System Uptime: 2 days 1:31:45.156
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+4977d )
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
BUGCHECK_STR:  0x1E_c0000005
PROCESS_NAME:  PProHeadless.e
FAILURE_BUCKET_ID:  X64_0x1E_c0000005_nt!_??_::FNODOBFM::_string_+4977d
BiosReleaseDate = 11/10/2010
SystemManufacturer = Alienware
SystemProductName = Aurora
CPUID:        "Intel(R) Core(TM) i7 CPU       X 980  @ 3.33GHz"
MaxSpeed:     3330
CurrentSpeed: 3341
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Fri Mar  2 07:52:18.529 2012 (UTC - 5:00)
System Uptime: 0 days 17:56:26.063
*** WARNING: Unable to verify timestamp for atapi.sys
*** ERROR: Module load completed but symbols could not be loaded for atapi.sys
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+37bba )
ERROR_CODE: (NTSTATUS) 0xc000000e - A device which does not exist was specified.
DISK_HARDWARE_ERROR: There was error with disk hardware
BUGCHECK_STR:  0x7a_c000000e
PROCESS_NAME:  mmc.exe
FAILURE_BUCKET_ID:  X64_0x7a_c000000e_nt!_??_::FNODOBFM::_string_+37bba
BiosReleaseDate = 11/10/2010
SystemManufacturer = Alienware
SystemProductName = Aurora
CPUID:        "Intel(R) Core(TM) i7 CPU       X 980  @ 3.33GHz"
MaxSpeed:     3330
CurrentSpeed: 3341
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
*** WARNING: Unable to verify timestamp for Unknown_Module_fa8016f9`d3c004c0
*** ERROR: Module load completed but symbols could not be loaded for Unknown_Module_fa8016f9`d3c004c0
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Sun Mar  4 18:38:14.555 2012 (UTC - 5:00)
System Uptime: 0 days 0:54:38.630
*** WARNING: Unable to verify timestamp for Unknown_Module_fa8016f9`d3c004c0
*** ERROR: Module load completed but symbols could not be loaded for Unknown_Module_fa8016f9`d3c004c0
Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )
BUGCHECK_STR:  CLOCK_WATCHDOG_TIMEOUT_c_PROC
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Mon Mar  5 14:37:58.464 2012 (UTC - 5:00)
System Uptime: 0 days 3:16:45.524
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+37bba )
ERROR_CODE: (NTSTATUS) 0xc000009c - STATUS_DEVICE_DATA_ERROR
DISK_HARDWARE_ERROR: There was error with disk hardware
BUGCHECK_STR:  0x7a_c000009c
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_0x7a_c000009c_nt!_??_::FNODOBFM::_string_+37bba
BiosReleaseDate = 11/10/2010
SystemManufacturer = Alienware
SystemProductName = Aurora
CPUID:        "Intel(R) Core(TM) i7 CPU       X 980  @ 3.33GHz"
MaxSpeed:     3330
CurrentSpeed: 3341
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Mon Feb  6 11:07:56.310 2012 (UTC - 5:00)
System Uptime: 0 days 23:52:27.309
Probably caused by : memory_corruption ( nt!MiDeleteAddressesInWorkingSet+27f )
BUGCHECK_STR:  0x50
PROCESS_NAME:  AfterFX.exe
FAILURE_BUCKET_ID:  X64_0x50_nt!MiDeleteAddressesInWorkingSet+27f
BiosReleaseDate = 11/10/2010
SystemManufacturer = Alienware
SystemProductName = Aurora
CPUID:        "Intel(R) Core(TM) i7 CPU       X 980  @ 3.33GHz"
MaxSpeed:     3330
CurrentSpeed: 3341
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
  
My System SpecsSystem Spec
Reply

 BSOD Problems - appears to be same device...




Thread Tools





Similar help and support threads
Thread Forum
An unknown device appears
In device manager is showing an unknown device. And I think it is new, because I never seen that before. :shock: :confused: It is similar to this topic : http://www.sevenforums.com/hardware-devices/96385-unknown-device.html I think the problem is the : ROOT\LEGACY_CPUZ132\0000 I...
Hardware & Devices
HDMI Audio Device No Longer Appears as Playback Device
I was wondering if you could give me some advice on a current computer issue. So, I've got my TV hooked up to my PC as an extra monitor via HDMI. Up until last night I was able to get audio from my PC to be played/heard/whatever through the TV. Earlier in the evening, I saw a bunch of...
Sound & Audio
Sound Device / Driver Problems Causing BSOD
I have no clue - I have no sound, reinstall the driver, get a BSOD, reboot using Last Config that worked which gives me back my sound until I attempt to logoff, which hangs because Windows can't play the logoff tune. It eventually shuts down, but on reboot I have no sound. Repeat cycle.
BSOD Help and Support
my laptop hard drive appears as a removable device...
after installing a fresh copy of W7, my Laptop hard drive shows up as a removable device (see attached photo, actual screen image of MY desktop area), however if you click to remove it, it says its in use, blah blah blah, can't eject or what have you, i just wanna know how to make this message go...
Hardware & Devices
Problems Ejecting device
my computer keeps telling me the device is in use. i am pretty sure that ive closed anything that might be using the device it used to do that once in a while before now its happening more often any help is appreciated thank you.
Hardware & Devices
webcam and other device problems... please Help!!
so i have just upgraded my dell studio to windows 7, and all was peachy but then i realized i could not find where my integrated webcam was, then i realized it was no one where to be found... the program which it ran on the dell webcam central was not there. also on my dell there was a tool bar at...
Hardware & Devices

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

й Designer Media Ltd

All times are GMT -5. The time now is 05:28.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App