Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Page_Fault_In_Nonpaged_Area + NTFS.SYS

06 Mar 2012   #1
Gnitrops

Windows 7 Professional 64 bits
 
 
Page_Fault_In_Nonpaged_Area + NTFS.SYS

Hello,

It's my first time in this forum, sorry if i'm doing anything wrong...

I have a problem in a laptop.

BSOD Page_Fault_In_Nonpaged_Area with the file ntfs.sys.

In attach is the dump files.

The system spec is:

Windows 7 Profession 64 bits - original
About 1 year age

Thank you in advance.

Gnitrops


My System SpecsSystem Spec
.

06 Mar 2012   #2
Erikbe

Windows 7 Ultimate x64
 
 

PAGE_FAULT_IN_NONPAGED_AREA is not necessarly caused by the mentioned driver it would help if you mention what you are doing exactely when it happens.Also is your harddrive still healty ? does chdsk report any errors ?
My System SpecsSystem Spec
06 Mar 2012   #3
Gnitrops

Windows 7 Professional 64 bits
 
 

Quote   Quote: Originally Posted by Erikbe View Post
PAGE_FAULT_IN_NONPAGED_AREA is not necessarly caused by the mentioned driver it would help if you mention what you are doing exactely when it happens.Also is your harddrive still healty ? does chdsk report any errors ?
Hello,

The BSOD appens with almost everything.

For example, i cannot even complete the system restore.

The hard drive is good and chkdsk don't report any errors.
My System SpecsSystem Spec
.


06 Mar 2012   #4
Erikbe

Windows 7 Ultimate x64
 
 

hi,

That is strange you got any stop errorcode ? when the crash happens and you reboot does windows error reporting comes up with "windows has been fixed from a crash" (or something like this) message ? you can choose there to try and find a solution you can also debug the dump file but that requires windows debugging tools.Are you still under warranty ? i would goto to the manufacterer this is not normal.I'm also thinking a virus might be the cause but a scan is kinda hard if it get's interrupted does it happen in safe mode to ? also run windows memory diagnostics it might be your memory has a problem. http://windows.microsoft.com/en-US/w...-your-computer
My System SpecsSystem Spec
06 Mar 2012   #5
Gnitrops

Windows 7 Professional 64 bits
 
 

Quote   Quote: Originally Posted by Erikbe View Post
hi,

That is strange you got any stop errorcode ? when the crash happens and you reboot does windows error reporting comes up with "windows has been fixed from a crash" (or something like this) message ? you can choose there to try and find a solution you can also debug the dump file but that requires windows debugging tools.Are you still under warranty ? i would goto to the manufacterer this is not normal.I'm also thinking a virus might be the cause but a scan is kinda hard if it get's interrupted does it happen in safe mode to ? also run windows memory diagnostics it might be your memory has a problem. Diagnosing memory problems on your computer
Yes, when the laptop reboot, windows show an error message (i can put it here tomorrow, i don't have the laptop with me right now).

I already tried the "Find a solution" option but don't resolve the problem.

Virus i don't think it is... i run Malwarebytes, Ccleaner, Panda Anti Virus,...

I also already run Windows Memory Diagnostics and didn't detect any problem.
My System SpecsSystem Spec
06 Mar 2012   #6
Wishmaster

Windows 7 Home Premium 64bit
 
 

The Page_Fault_In_Nonpaged_Area error can be caused by a number of things.

Faulty Hardware, Drivers, RAM (could be main system memory or Graphics VRAM), or even a Antivirus Program.


Have you added in new Hardware/Software lately? If so, remove it as well as any software or drivers associated with it and see if it helps.


At this point you should probably run a sfc /scannow from a elevated cmd prompt.
SFC /SCANNOW Command - System File Checker


Then, do a check disk.
Disk Check
My System SpecsSystem Spec
06 Mar 2012   #7
Gnitrops

Windows 7 Professional 64 bits
 
 

Quote   Quote: Originally Posted by Wishmaster View Post
The Page_Fault_In_Nonpaged_Area error can be caused by a number of things.

Faulty Hardware, Drivers, RAM (could be main system memory or Graphics VRAM), or even a Antivirus Program.


Have you added in new Hardware/Software lately? If so, remove it as well as any software or drivers associated with it and see if it helps.


At this point you should probably run a sfc /scannow from a elevated cmd prompt.
SFC /SCANNOW Command - System File Checker


Then, do a check disk.
Disk Check
I already did the sfc /scannow. No problem detected.

I will try tomorroy to remove any software that was recently installed...
My System SpecsSystem Spec
06 Mar 2012   #8
writhziden

Windows 7 Home Premium 64 Bit
 
 

Sometimes disk checks can come up clean for a drive that is faulty. I would run the manufacturer's diagnostic tests. See HD Diagnostic for finding the manufacturer and the diagnostics that manufacturer recommends.
My System SpecsSystem Spec
07 Mar 2012   #9
Gnitrops

Windows 7 Professional 64 bits
 
 

The error message after reboot is:

Assinatura do problema:
Nome do Evento de Problema: BlueScreen
Versão do SO: 6.1.7600.2.0.0.256.48
ID de Região: 2070
Informações adicionais sobre o problema:
BCCode: 50
BCP1: FFFFF98021FC0000
BCP2: 0000000000000000
BCP3: FFFFF880014610C4
BCP4: 0000000000000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1
Ficheiros que ajudam a descrever o problema:
C:\Windows\Minidump\030612-18891-01.dmp
C:\Users\joaoaraujo\AppData\Local\Temp\WER-143474-0.sysdata.xml
Leia a nossa declaração de privacidade online:
Declaração de Privacidade do Windows 7 - Microsoft Windows
Se a declaração de privacidade online não estiver disponível, leia a declaração de privacidade offline:
C:\windows\system32\pt-PT\erofflps.txt
My System SpecsSystem Spec
07 Mar 2012   #10
writhziden

Windows 7 Home Premium 64 Bit
 
 

Quote   Quote: Originally Posted by Gnitrops View Post
The error message after reboot is:

Signature of the problem:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.48
Region ID: 2070
Additional information about the problem:
BCCode: 50
BCP1: FFFFF98021FC0000
BCP2: 0000000000000000
BCP3: FFFFF880014610C4
BCP4: 0000000000000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1
Files that help describe the problem:
C: \ Windows \ Minidump \ 030612-18891-01.dmp
C: \ Users \ joaoaraujo \ AppData \ Local \ Temp \ WER-143474-0.sysdata.xml
Read our privacy statement online:
Privacy Statement Windows 7 - Microsoft Windows
If the online privacy statement is not available, read the privacy statement offline:
C: \ windows \ system32 \ en-US \ erofflps.txt
Have you had a chance to run the hard disk diagnostics?

Also, what software have you installed recently that you were thinking of removing?
My System SpecsSystem Spec
Reply

 Page_Fault_In_Nonpaged_Area + NTFS.SYS




Thread Tools





Similar help and support threads
Thread Forum
Ntfs.sys - page_fault_in_nonpaged_area
My SSD has suddenly started BSODing the computer whenever it's plugged in. It boots fine without it installed but whenever I install it via sata or usb using a caddy, it immediately BSODs. I have ran memtest86+ multiple times with both 1 and 2 sticks installed and no errors occur Minidumps attached
BSOD Help and Support
nTFS.SYS PAGE_FAULT_IN_NONPAGED_AREA
Hello. My Acer Laptop can not start at all. Can any one help me: It shows a msg like this: nTFS.SYS PAGE_FAULT_IN_NONPAGED_AREA
BSOD Help and Support
PAGE_FAULT_IN_NONPAGED_AREA Help !
So I finally decided to put a Pc together myself, I had sourced the parts over the last month and had had peroids or clam and the peroids that make me wish i had brought a box from a shop and paid more.. there is no consistancy to when and how the BSOD will appear, and ive tried everything form...
BSOD Help and Support
Page_fault_in_nonpaged_area
Dear Friends: I'm having this bluescreen and some others too (like IRQL_NOT_LESS_OR_EQUAL) since the windows update installed service pack 1 Do you know if this update causes this kind of problems? because my hardware seems to be OK. Here are some results from my computer. Thanks a...
BSOD Help and Support
How to change "FAT32" penDrive to "NTFS"? can't format it "NTFS"
I have "Kingston" 4GB pen-drive its file system is "FAT32" i try to change its files system to "NTFS" using "formatting" process. When i try to format it in "NTFS" this error show. "Windows was unable to complete the Format." So how do i change its file system to "NTFS"? :mad: ...
Hardware & Devices
PAGE_FAULT_IN_NONPAGED_AREA Help
I have been crashing constantly since I have installed a new mobo (ga-890fxa-ud) and a new processor (1090T). My OS is windows 7 64 bit home premium. I tried to read the mini dump files but couldn't because of the wrong symbols. Hopfully I can fix this blue screen of death :cry: .
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 04:46.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App