Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Random BSOD


09 Mar 2012   #11

Windows 7 64 bit Professional
 
 

It is runing right now for about 2nd run
I will post the results after 7 runs.
Thank you


My System SpecsSystem Spec
.

09 Mar 2012   #12

Windows 7 64 bit Professional
 
 

This is a first time that i am runing memtest,so i am not sure what to look and where to look as the results any help?
My System SpecsSystem Spec
09 Mar 2012   #13

Windows 7 Home Premium 64 Bit
 
 

Next to the number of passes is the errors number. If you see any red on the screen, that means errors have been found. If the screen has no red, the RAM is likely good. Also keep an eye on the errors count, though. It should remain at 0 if the RAM is not defective or damaged.
My System SpecsSystem Spec
.


09 Mar 2012   #14

Windows 7 64 bit Professional
 
 

Here is some screen shots, can you analize this numbers please?
Looks like i have bad rams after all.
Thank you very mutch.
My System SpecsSystem Spec
09 Mar 2012   #15

Windows 7 Home Premium 64 Bit
 
 

Follow part 3 of the SevenForums Memtest86+ tutorial to determine which module/slot is bad.
My System SpecsSystem Spec
10 Mar 2012   #16

Windows 7 64 bit Professional
 
 

Thanks, i will do that.
My System SpecsSystem Spec
10 Mar 2012   #17

Windows 7 Home Premium 64 Bit
 
 

Keep us updated on how the system responds to the RAM/slot testing. Make sure to Avoid Static Damage to Your PC. Best of luck.
My System SpecsSystem Spec
10 Mar 2012   #18

Windows 7 64 bit Professional
 
 

It is end up that one memory stick has gone bad over 2 years,so i took it out and runing now with 2 sticks only in stead of 4.
Ordered two new ones (they are very inexpensive now),i will let the system run till tomorow and see if any crash or BSOD. i will post if any changes.
Thank you for your help it is very mutch appreciated.
My System SpecsSystem Spec
10 Mar 2012   #19

Windows 7 64 bit Professional
 
 

Hi, is it possible to fix these files without doing clean repair?
I don not know if i even need them,last sfc came with this errors.
Mostly iscsi_init.CHM, and machine.config.comments of NetFx-MACHINE_CONFIG_OCM.
Thanks
My System SpecsSystem Spec
10 Mar 2012   #20

Windows 7 Home Premium 64 Bit
 
 

The best way to fix the errors is to replace the corrupted files using a Windows 7 install disc or to do a repair install. If you would like to attempt to replace the corrupted Windows files, see OPTION THREE of SFC /SCANNOW Command - System File Checker and then once the files have been replaced, reboot your computer and run sfc /scannow to verify all corruptions have been repaired.
My System SpecsSystem Spec
Reply

 Random BSOD




Thread Tools




Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 05:36 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33